Get Involved/development/IDE configuration/CLion

From KDE Community Wiki
Revision as of 14:01, 2 April 2024 by Merritt1 (talk | contribs) (Added notice for redirect)

Warning

The contents of this page has been ported to https://develop.kde.org/docs/getting-started/building/ide/ and will eventually be redirected there. Please do not update this page.


Please ignore the rest of this wiki page because this page is no longer being updated.


CLion is a proprietary IDE for C++ from JetBrains.

Install CLion

Follow the Install CLion documentation.

If using Arch Linux, you can install the AUR package clion.

Setup a KDE project in CLion

In this article we will use dolphin as an example project. Prerequisite is that you have successfully built a project following kdesrc-build setup procedure. This article assumes your username is username, and the kdesrc-build setup path is /home/username/kde/. Replace them to the your values in the specified commands.

Importing project

In the "Welcome to Clion" window press "Open" button. In the "Open File or Project", chose a root folder of dolphin project (~/kde/src/dolphin) or select the CMakeLists.txt file in that directory. It will ask how do you want to open it. Press "Open as Project" for file, or "Open as CMake project" for directory.

open as cmake project

CMake profile

After previous step, the new window will open to setup cmake profile. You can reach these settings later by going to Settings | Build, Execution, Deployment | CMake.

  • Choose Debug build.
  • In the Generator, set "Let Cmake decide".
  • In the Build directory, specify the build directory path, for this example it will be /home/username/kde/build/dolphin.

build configuration

  • Under CMake options (in this same window), we must set some important variables such as CMAKE_PREFIX_PATH. If the prefix was in "/home/username/kde", then the CMake options line would look like:
-DCMAKE_PREFIX_PATH=/home/username/kde/usr
-DCMAKE_MODULE_PATH=/home/username/kde/usr/lib64/cmake:/home/username/kde/usr/lib/cmake
-DQT_PLUGIN_PATH=/home/username/kde/usr/lib64/plugins:/home/username/kde/usr/lib/plugins
-DXDG_DATA_DIRS=/home/username/kde/usr/share

You probably would want to save that to file `~/kde/clion_cmake_options.txt` for future use.

  • Press OK.

Run/Debug Configuration

In the run/debug target (in the upper right corner of main window), select "dolphin".

select run debug configuration

Expand it and choose Edit.

go to run debug configuration edit

The Run/Debug Configurations window will appear.

run debug configuration

In the Environment variables field click edit button.

You can add variables in there manually or reuse exports from prefix.sh script from build directory.

Note: if you want to modify debugging output messages, you can add corresponding variables there. See Guidelines and HOWTOs/Debugging/Using Error Messages#Controlling_Messages.

Variants to setup environment variables

run debug variables configuration

Reusing existing prefix.sh

For convenience, copy the /home/username/kde/build/dolphin/prefix.sh to /home/username/kde/clion_run_environment.sh. Use the following syntax for setting variables in that script: export VAR=value.

In the Environment Variables dialog, in the Load Variables from file field, paste the path /home/username/kde/clion_run_environment.sh.

While it is possible to specify some additional variables alongside with environment script (as specified in #Setting variables manually), it may be inconvenient to edit them in case you want to keep the same variables for many run/debug configurations. For example, when you decide to change the QT_MESSAGE_PATTERN. There is a way to keep them in one place, while having control over them.

The environment script supports sourcing another script. So we need to place our common environment variables to separate file:

~/kde/qt_logging_environment.sh
export QT_FORCE_STDERR_LOGGING=1
export QT_LOGGING_RULES='ark*=true;kf.coreaddons=false;kf.service.services=false;kf.service.sycoca=false;qt.qpa.wayland=false;kf.moretools=false;default=false'
export QT_MESSAGE_PATTERN='[%{time hh:mm:ss} %{if-debug}D%{endif}%{if-info}I%{endif}%{if-warning}W%{endif}%{if-critical}C%{endif}%{if-fatal}F%{endif}] %{function} %{file}:%{line} %{message}'

and source it from the first file:

~/kde/clion_run_environment.sh
...
source /home/username/kde/qt_logging_environment.sh

But keep in mind, you need to touch the original script for changes to be applied. See CPP-35329.

Setting variables manually

Take the content of the generated environment script:

~/kde/build/dolphin/prefix.sh
export PATH=/home/username/kde/usr/bin:$PATH

# LD_LIBRARY_PATH only needed if you are building without rpath
# export LD_LIBRARY_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu:$LD_LIBRARY_PATH

export XDG_DATA_DIRS=/home/username/kde/usr/share:${XDG_DATA_DIRS:-/usr/local/share/:/usr/share/}
export XDG_CONFIG_DIRS=/home/username/kde/usr/etc/xdg:${XDG_CONFIG_DIRS:-/etc/xdg}

export QT_PLUGIN_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/plugins:$QT_PLUGIN_PATH
export QML2_IMPORT_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/qml:$QML2_IMPORT_PATH

export QT_QUICK_CONTROLS_STYLE_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/qml/QtQuick/Controls.2/:$QT_QUICK_CONTROLS_STYLE_PATH

and translate it to the form of variables list that you can paste to CLion. Note that their variables have trailing '$' sign. In order to reuse it when loading other KDE projects in CLion, save it to the file:

~/kde/clion_run_environment.txt
PATH=/home/username/kde/usr/bin:$PATH$
XDG_DATA_DIRS=/home/username/kde/usr/share:$XDG_DATA_DIRS$:/usr/local/share/:/usr/share/}
XDG_CONFIG_DIRS=/home/username/kde/usr/etc/xdg:$XDG_CONFIG_DIRS$:/etc/xdg
QT_PLUGIN_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/plugins:$QT_PLUGIN_PATH$
QML2_IMPORT_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/qml:$QML2_IMPORT_PATH$
QT_QUICK_CONTROLS_STYLE_PATH=/home/username/kde/usr/lib/x86_64-linux-gnu/qml/QtQuick/Controls.2/:$QT_QUICK_CONTROLS_STYLE_PATH$

Then in the Environment Variables dialog, paste the contents of the ~/kde/clion_run_environment.txt.

Tips and Tricks

Set defaults for new projects

When opening new project in CLion, you fill in their settings manually every time. For convenience, you can specify default settings for newly opened projects. To do this, follow these steps:

  • Go to File | New Projects Setup | Settings for New Projects.
The Build, Execution, Deployment | CMake page will be opened.
  • Open the Debug profile.
  • In the Generator field choose 'Let CMake decide'.
  • In the Build directory field type: $PROJECT_DIR$/../../build/$PROJECT_NAME$.
  • Press OK button.

JetBrains Dolphin Plugin

JetBrains Dolphin Plugin is a service menu plugin (context menu action) which allows you to easily open folders as ide projects.

You can install it from the store.kde.org (in the Configure Dolphin choose Context Menu, then press Download New Services... button. Search for Jetbrains Dolphin Plugin by alex1701c).

If using Arch Linux, you will prefer to install from AUR.

JetBrains Runner

You can install JetBrainsRunner search plugin to be able to quickly open recent projects in JetBrains IDEs.

If you using Arch Linux, you will prefer to install from AUR: plasma5-runners-jetbrains-runner-git or plasma6-runners-jetbrains-runner-git.

Plugins for CLion

Qt6Renderer

Currently, the Qt classes do not support pretty printing in debugger in CLion out of the box. See Bug CPP-605 for more information.

You can install Qt6Renderer plugin by Nikita Kobzev. Note that currently it works only with lldb debugger.

GNU GetText files support ​(*.​po)​

Install the GetText files support ​(*.​po)​ plugin. It will make the source lines in the po files clickable.

For example, you search the strings in local language, to find the place in code where it is used, you find it in *.po files. They contain stanzas like this:

~/kde/src/ark/po/ru/ark.po
#: part/part.cpp:132
#, kde-format
msgid "Comment has been modified."
msgstr "Комментарий был изменен."

You want to quickly jump to the source file. That source file (part/part.cpp:132) becomes a clickable link if you install the plugin.

Breeze Dark theme

If using Classic UI, you may want to install Breeze Dark theme, so that you IDE appearance correspond to standard KDE theme.

Non-project executable to run

When developing a library, it may be convenient to launch some application that uses it, from the current project. For example, you work with Ark's libraries used in Dolphin context menu actions. You can make your run configuration to launch custom binary - dolphin.

To do that, do the following:

  • Open Run/Debug Configurations window
  • Click "+" button to add a new configuration
  • Choose type CMake Application
The new configuration will appear.
  • Give it a meaningful name, for example ark (run dolphin).
  • In Target field choose All Targets.
  • In the Executable field, specify path to dolphin binary: /home/username/kde/build/dolphin/bin/dolphin.
  • In the Environment Variables set it up as described in the corresponding section.
  • Press OK.

run debug variables configuration

Now when you run this configuration, the Ark will be built, but Dolphin will be launched.

Use KWallet for git credentials

You need to enable this key in Registry: credentialStore.linux.prefer.kwallet. It allows to use KWallet if KWallet & SecretService are both available.

Use native titlebar with New UI

It is possible to switch to "New UI", while still showing normal window titlebar. For this, open registry (Double tab Shift, search for Registry) and disable property ide.linux.hide.native.title.

External links