GSoC/2024/Ideas: Difference between revisions

From KDE Community Wiki
< GSoC‎ | 2024
(move some ideas outside lokalize as they are not lokalize at all)
 
(22 intermediate revisions by 7 users not shown)
Line 46: Line 46:
'''Duration:''' Mention one of ~90, ~175 or ~350 hours of effort necessary to finish the project. Use only one of these three project classes and don't come up with other numbers here.
'''Duration:''' Mention one of ~90, ~175 or ~350 hours of effort necessary to finish the project. Use only one of these three project classes and don't come up with other numbers here.


'''Difficulty:''': Easy, medium or difficult project
'''Difficulty:''' Easy, medium or difficult project


'''Mentor:''' Try to see who in KDE is interested in what you want to work on and approach them. If you are unsure you can always ask in [https://matrix.to/#/#kde-soc:kde.org #kde-soc:kde.org] on matrix.
'''Mentor:''' Try to see who in KDE is interested in what you want to work on and approach them. If you are unsure you can always ask in [https://matrix.to/#/#kde-soc:kde.org #kde-soc:kde.org] on matrix.




==Ideas==
=Ideas=
=== KDE Frameworks ===
== KDE Frameworks ==
==== Python bindings for KDE Frameworks ====
=== Python bindings for KDE Frameworks ===


'''Brief explanation:''' While Qt itself, has official bindings to Python, this is not the case for the KDE Frameworks. This project hopes to add python bindings to as many frameworks as possible during the summer.
'''Brief explanation:''' While Qt itself, has official bindings to Python, this is not the case for the KDE Frameworks. This project hopes to add python bindings to as many frameworks as possible during the summer.
Line 63: Line 63:
'''Duration:''' Flexible depending on the amount of frameworks we want to cover during this GSoC (175 or 350 hours).
'''Duration:''' Flexible depending on the amount of frameworks we want to cover during this GSoC (175 or 350 hours).


'''Difficulty:''': Medium
'''Difficulty:''' Medium


'''Mentor:''' Carl Schwan - @carl:kde.org on matrix
'''Mentor:''' Carl Schwan - @carl:kde.org on matrix


==== Project: Port oss-fuzz tests to Qt6 ====
 
=== Port oss-fuzz tests to Qt6 ===


'''Project type:''' Coding
'''Project type:''' Coding
Line 79: Line 80:
'''Duration:''' 175 hours
'''Duration:''' 175 hours


'''Difficulty:''': Medium/Hard
'''Difficulty:''' Medium/Hard


'''Mentor:''' Albert Astals Cid <[email protected]>
'''Mentor:''' Albert Astals Cid <[email protected]>


=== Arianna ===
==== Port Arianna to Foliate-js ====


'''Brief explanation:''' Arianna is an ebook reader and currently use epub.js, which is not really maintained anymore. The idea would be to port it https://github.com/johnfactotum/foliate-js which is modern epub renderer used by foliate.
=== ISO Image Writer to Qt Quick ===
 
'''Project type:''' Coding
 
'''Brief explanation:''' Port ISO Image Writer to Qt Quick
 
'''Expected results:''' A more shiney UI
 
'''Knowledge Prerequisite:''' C++, QML
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Medium
 
'''Mentor:''' Jonathan Riddell jr @ jriddell.org
 
 
=== Release Scripts Using invent.kde.org (Gitlab) ===
 
'''Project type:''' Coding
 
'''Brief explanation:''' Write release scripts for our apps and libraries which uses the Gitlab infrastructure on invent.kde.org


'''Expected results:''' A nice and modern epub renderer for Arianna
'''Expected results:''' Slicker release process


'''Knowledge Prerequisite:''' Javascript knowledge and minimal C++ knowledge to build the project
'''Knowledge Prerequisite:''' Gitlab API using maybe Ruby or something similar


'''Duration:''' 175 hours
'''Duration:''' 175 hours


'''Difficulty:''': Medium
'''Difficulty:''' Medium
 
'''Mentor:''' Jonathan Riddell jr @ jriddell.org  Harald Sitter sitter @ kde.org


'''Mentor:''' Carl Schwan - @carl:kde.org on matrix


=== GCompris ===
== KDE Connect ==
==== Project: Adding support for multiple numeral system in GCompris ====
 
The following are ideas for the KDE Connect Android, iOS and desktop apps. Feel free to also take a look at the [https://invent.kde.org/network/kdeconnect-meta/-/issues curated list of tasks in the meta repo].
 
=== Update SSH library in the Android app ===
 
'''Project type:''' Coding
 
'''Brief explanation:''' KDE Connect is a desktop and phone app that lets you devices communicate. https://kdeconnect.kde.org/


'''Brief explanation:''' For now, GCompris numbers are always displayed as Western Arabic numbers (0, 1, ...). There are several systems in the world and Qt/Javascript provides us ways to select the ones we want. The aim of the task is to add the handling of multiple systems and update all the places we display numbers to use the new system. A bit more details are available in https://phabricator.kde.org/T16332.
The Remote File Browser plugin works by running an SFTP server on Android and connecting to it using SSHFS from the desktop.


'''Expected results:''' Ability to change numeral system and change it on all the code.
The SFTP server implementation we use in Android is from Apache mina-sshd. This is a Java library. However, due to some differences in the way to access the filesystem in Android, the latest version we managed to get working is 0.14 from 2015.


'''Knowledge Prerequisite:''' Basics on Javascript and C++
The goal of this task is to upgrade to a recent version. You can see all the released versions here: https://mvnrepository.com/artifact/org.apache.sshd/sshd-core


'''Duration:''' ~175 hours
One API that newer versions of Apache Mina use is java.nio.file, which wasn't available in Android until API 26. We currently support down to API 21, but we can bump the requirement to API 26 if required to update this library (maybe nio file can be dessugared, though?). In any case, there probably are more incompatibilities that we need to solve to be able to upgrade.


'''Difficulty:''': Easy
'''Expected results:''' We get rid of the old mina sshd library used in the Android app for remote file access, and we use either a new version or something else.


'''Mentors:''' Emmanuel Charruau @allon:kde.org / Harsh Kumar @hadron43:kde.org / Johnny Jazeix @johnnyj:kde.org. But please join #gcompris:kde.org to discuss with the team.
'''Knowledge Prerequisite:''' This should only require changes to the Android app, which is written in Java & Kotlin.


'''Mentor:''' Albert Vaca Cintora <[email protected]>


=== KDE Connect ===
=== Allow sharing non-text clipboard contents ===
==== Project: Work on one or more KDE Connect tasks (to be refined) ====


'''Project type:''' Coding
'''Project type:''' Coding


'''Brief explanation:''' KDE Connect is a desktop and phone app that lets you devices communicate. https://kdeconnect.kde.org/
'''Brief explanation:''' KDE Connect is a desktop and phone app that lets you devices communicate. https://kdeconnect.kde.org/
Currently we only sync the clipboard if it contains text. However, the clipboard can contain a variety of data. One of the most common cases besides text are images.


'''Expected results:''' Work on some of the tasks detailed here: https://invent.kde.org/network/kdeconnect-meta/-/issues
The APIs we use to read the clipboard let us read and write images:
       
* In Qt the clipboard has a mimetype field of type QMimeData which can be asked for hasImage (in addition to hasUrls and hasHtml [1])
       
* On the Android side, we can use ClipboardManager's setPrimaryClip to set the different types of clipboard.
 
To support this, in addition to the text-only "content" field we will need to send a mime-type field with the mimetype of the clipboard. For image (or any future non-text) mimetypes, an attached payload will contain the image data.
To not transfer huge payloads because of this, we should set an upper size limit (eg: 1 MB, we can change this in a future or even make it configurable).
 
[1] We probably don't care about URLs because they can be sent as text and they still work, but in a future it might be interesting to also support HTML so we can sync formatted text.
 
'''Expected results:''' We can copy-paste images and formatted text across platforms.


'''Knowledge Prerequisite:''' The desktop app is written in C++/Qt, the Android app in Java & Kotlin, and the iOS app in Swift.
'''Knowledge Prerequisite:''' The desktop app is written in C++/Qt, the Android app in Java & Kotlin, and the iOS app in Swift.
Line 128: Line 168:




=== sddm-kcm ===
== Arianna ==
==== Project: Harden sddm-kcm ====
=== Port Arianna to Foliate-js ===
 
'''Brief explanation:''' Arianna is an ebook reader and currently use epub.js, which is not really maintained anymore. The idea would be to port it https://github.com/johnfactotum/foliate-js which is modern epub renderer used by foliate.
 
'''Expected results:''' A nice and modern epub renderer for Arianna
 
'''Knowledge Prerequisite:''' Javascript knowledge and minimal C++ knowledge to build the project
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Medium
 
'''Mentor:''' Carl Schwan - @carl:kde.org on matrix
 
== GCompris ==
=== Add support for multiple numeral system in GCompris ===
 
'''Brief explanation:''' For now, GCompris numbers are always displayed as Western Arabic numbers (0, 1, ...). There are several systems in the world and Qt/Javascript provides us ways to select the ones we want. The aim of the task is to add the handling of multiple systems and update all the places we display numbers to use the new system. A bit more details are available in https://phabricator.kde.org/T16332.
 
'''Expected results:''' Ability to change numeral system and change it on all the code.
 
'''Knowledge Prerequisite:''' Basics on Javascript and C++
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Easy
 
'''Mentors:''' Emmanuel Charruau @allon:kde.org / Harsh Kumar @hadron43:kde.org / Johnny Jazeix @johnnyj:kde.org. But please join #gcompris:kde.org to discuss with the team.
 
== sddm-kcm ==
=== Harden sddm-kcm ===


'''Project type:''' Coding
'''Project type:''' Coding
Line 141: Line 211:
'''Duration:''' 175 hours
'''Duration:''' 175 hours


'''Difficulty:''': Medium/Hard
'''Difficulty:''' Medium/Hard


'''Mentor:''' Albert Astals Cid <[email protected]>
'''Mentor:''' Albert Astals Cid <[email protected]>


 
== Okular ==
 
 
=== Okular ===


Okular is a universal document viewer developed by KDE. Okular works on multiple platforms, including but not limited to Linux, Windows, Mac OS X, *BSD. Contact the Okular developers.  
Okular is a universal document viewer developed by KDE. Okular works on multiple platforms, including but not limited to Linux, Windows, Mac OS X, *BSD. Contact the Okular developers.  


==== Project: Improve Forms/Javascript support ====
=== Improve Forms/Javascript support ===


'''Project type:''' Coding
'''Project type:''' Coding
Line 164: Line 231:
'''Duration:''' 175 hours
'''Duration:''' 175 hours


'''Difficulty:''': Medium/Hard
'''Difficulty:''' Medium/Hard


'''Mentor:''' Albert Astals Cid <[email protected]>
'''Mentor:''' Albert Astals Cid <[email protected]>


 
== Krita ==
=== Krita ===


'''Krita is a digital painting application, used by millions of people all over the world. For Google Summer of Code, we expect students to already have contributed to Krita by building the application and submitting merge requests for some bug fixes. Note that some projects also demand a good knowledge of algorithms and skill in doing research. Even if there are a lot of ideas, only 3 contributors maximum will be selected for Krita this year.
'''Krita is a digital painting application, used by millions of people all over the world. For Google Summer of Code, we expect students to already have contributed to Krita by building the application and submitting merge requests for some bug fixes. Note that some projects also demand a good knowledge of algorithms and skill in doing research. Even if there are a lot of ideas, only 3 contributors maximum will be selected for Krita this year.
Line 178: Line 244:
'''
'''


==== => Project: Averaged/Mixed Color Selector ====
=== Averaged/Mixed Color Selector ===
'''Brief explanation''': Design improvements to Digital Colors Mixer (+ Mixer Slider Docker)  with users feedback (including adding a possibility of a gradient cross all channels for custom colors).
'''Brief explanation''': Design improvements to Digital Colors Mixer (+ Mixer Slider Docker)  with users feedback (including adding a possibility of a gradient cross all channels for custom colors).


Line 184: Line 250:


'''Knowledge Prerequisite''':  C++, Qt
'''Knowledge Prerequisite''':  C++, Qt
'''Difficulty:''' Medium


'''Duration:''' ~90h
'''Duration:''' ~90h
Line 191: Line 259:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=363315
'''Link''': https://bugs.kde.org/show_bug.cgi?id=363315


==== => Project: Saving curves ====
 
=== Saving curves ===
'''Brief explanation''': There are several places in Krita where we use a specific type of a curve. There is no way to save them or copy to another part of the interface. This project intends to fill that gap.
'''Brief explanation''': There are several places in Krita where we use a specific type of a curve. There is no way to save them or copy to another part of the interface. This project intends to fill that gap.


Line 199: Line 268:


'''Duration:''' ~90h
'''Duration:''' ~90h
'''Difficulty:''' Medium


'''Mentor''': Tiar
'''Mentor''': Tiar
Line 204: Line 275:
'''Links''': [https://bugs.kde.org/show%20bug.cgi?id=387352 Color Adjustment curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=391927 Brush editor curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=401496 Brush sensors curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=433947 Pressure curves bug report link]
'''Links''': [https://bugs.kde.org/show%20bug.cgi?id=387352 Color Adjustment curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=391927 Brush editor curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=401496 Brush sensors curves bug report link], [https://bugs.kde.org/show_bug.cgi?id=433947 Pressure curves bug report link]


==== => Project: Precision and new units in guides ====
 
=== Precision and new units in guides ===
'''Brief explanation''': Users should be able to edit guides by entering the new value, and they should allow more units than just pixels.
'''Brief explanation''': Users should be able to edit guides by entering the new value, and they should allow more units than just pixels.


Line 212: Line 284:


'''Duration:''' ~90h
'''Duration:''' ~90h
'''Difficulty:''' Medium


'''Mentor''': Wolthera
'''Mentor''': Wolthera
Line 217: Line 291:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=376943
'''Link''': https://bugs.kde.org/show_bug.cgi?id=376943


==== => Project: Merging masks ====
 
=== Merging masks ===
'''Brief explanation''': Krita has several types of masks, this is about Transparency Masks, with Local Selections, Filter Masks and Colorize Masks as a stretch goal. The project is to add a way to merge masks together.
'''Brief explanation''': Krita has several types of masks, this is about Transparency Masks, with Local Selections, Filter Masks and Colorize Masks as a stretch goal. The project is to add a way to merge masks together.


Line 225: Line 300:


'''Duration:''' ~90h
'''Duration:''' ~90h
'''Difficulty:''' Medium


'''Mentor''': Tiar
'''Mentor''': Tiar
Line 230: Line 307:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=380141
'''Link''': https://bugs.kde.org/show_bug.cgi?id=380141


==== => Project: Onion Skin Shift & Trace ====
 
=== Onion Skin Shift & Trace ===
'''Brief explanation''': It's a feature that is really important for animators. It allows the user to move and rotate onion skins which makes tracing changing objects in motion way easier. It must be designed with professional animators in mind, not just casual users.
'''Brief explanation''': It's a feature that is really important for animators. It allows the user to move and rotate onion skins which makes tracing changing objects in motion way easier. It must be designed with professional animators in mind, not just casual users.


Line 238: Line 316:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Emmet
'''Mentor''': Emmet
Line 244: Line 324:




==== => Project: Selection Action Bar ====
=== Selection Action Bar ===
'''Brief explanation''': A floating bar, similar to assistants handles, containing several of the most useful actions. Suggested list of options (can change after discussions with users): Invert selection, crop to selection (layer or image), fill selection with foreground color, copy (or cut?) selected content to new layer, transform selected content, deselect selection, and a move handle for the bar itself.
'''Brief explanation''': A floating bar, similar to assistants handles, containing several of the most useful actions. Suggested list of options (can change after discussions with users): Invert selection, crop to selection (layer or image), fill selection with foreground color, copy (or cut?) selected content to new layer, transform selected content, deselect selection, and a move handle for the bar itself.


Line 252: Line 332:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Emmet, Wolthera or Tiar
'''Mentor''': Emmet, Wolthera or Tiar
Line 257: Line 339:
'''Link''': https://krita-artists.org/t/selection-action-bar/48767
'''Link''': https://krita-artists.org/t/selection-action-bar/48767


==== => Project: New option in Color Sampler ====
 
=== New option in Color Sampler ===
'''Brief explanation''': Users often want to sample colors from specific layers. This project should add at least two of the following options: “Current layer and below”, “Current layer and below, without filters”, ”All layers except current one”, “Color Labeled Layers” (selecting and merging color labeled layers is already implemented). In addition to that, it should contain two new actions, one for sampling the foreground color according to the Color Sampler tool options, and another for sampling the background color with those options.
'''Brief explanation''': Users often want to sample colors from specific layers. This project should add at least two of the following options: “Current layer and below”, “Current layer and below, without filters”, ”All layers except current one”, “Color Labeled Layers” (selecting and merging color labeled layers is already implemented). In addition to that, it should contain two new actions, one for sampling the foreground color according to the Color Sampler tool options, and another for sampling the background color with those options.


Line 265: Line 348:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Tiar, Emmet or Wolthera
'''Mentor''': Tiar, Emmet or Wolthera
Line 270: Line 355:
'''Links''': [https://krita-artists.org/t/color-labeled-layers-sample-option-for-color-sampler-tool-feature-request/42653 Feature request on KA about Color Labeled Layers option], [https://bugs.kde.org/show_bug.cgi?id=395231 Bug report about "Current and below" and "Current and below without filter layers" options], [https://bugs.kde.org/show_bug.cgi?id=432847 Bug report about "All layers except the current one" option].
'''Links''': [https://krita-artists.org/t/color-labeled-layers-sample-option-for-color-sampler-tool-feature-request/42653 Feature request on KA about Color Labeled Layers option], [https://bugs.kde.org/show_bug.cgi?id=395231 Bug report about "Current and below" and "Current and below without filter layers" options], [https://bugs.kde.org/show_bug.cgi?id=432847 Bug report about "All layers except the current one" option].


==== => Project: Waveform in animation track ====
 
=== Waveform in animation track ===
'''Brief explanation''': Waveform is very useful for animators to sync the animation to the sound (for example lip syncing). Note that waveform generation is already implemented in MLT, the multimedia library Krita is using.
'''Brief explanation''': Waveform is very useful for animators to sync the animation to the sound (for example lip syncing). Note that waveform generation is already implemented in MLT, the multimedia library Krita is using.


Line 278: Line 364:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Emmet
'''Mentor''': Emmet
Line 283: Line 371:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=393140
'''Link''': https://bugs.kde.org/show_bug.cgi?id=393140


==== => Project: Summary frames on groups ====
 
=== Summary frames on groups ===
'''Brief explanation''': Animation related project. Contact Emmet for more details.
'''Brief explanation''': Animation related project. Contact Emmet for more details.


Line 291: Line 380:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Emmet
'''Mentor''': Emmet
Line 296: Line 387:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=437026
'''Link''': https://bugs.kde.org/show_bug.cgi?id=437026


==== => Project: Improve Compositions Docker's Batch Export Features ====
 
=== Improve Compositions Docker's Batch Export Features ===
'''Brief explanation''': The current Compositions Docker does feature exporting and batch exporting, but currently lacks configuration for image or animation export settings. It could use more control over how all compositions are exported.  
'''Brief explanation''': The current Compositions Docker does feature exporting and batch exporting, but currently lacks configuration for image or animation export settings. It could use more control over how all compositions are exported.  


Line 304: Line 396:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': TBD
'''Mentor''': TBD




==== Project: Pixel Perfect Hand-drawn Lines ====
=== Pixel Perfect Hand-drawn Lines ===
'''Brief explanation''': In Pixel Art dedicated programs the line painted by the "pencil" tool (1px solid pixel brush) is not just following the user's mouse/pen's coordinates, but removing duplicate pixels in a smart way, resulting in a so-called "pixel perfect" line. Example: [https://krita-artists.org/uploads/default/original/3X/9/a/9a3e00940e0332112c3da879c916d769a698e6dc.png] The task is to implement such feature in Krita.  
'''Brief explanation''': In Pixel Art dedicated programs the line painted by the "pencil" tool (1px solid pixel brush) is not just following the user's mouse/pen's coordinates, but removing duplicate pixels in a smart way, resulting in a so-called "pixel perfect" line. Example: [https://krita-artists.org/uploads/default/original/3X/9/a/9a3e00940e0332112c3da879c916d769a698e6dc.png] The task is to implement such feature in Krita.  


Line 316: Line 410:


'''Duration:''' ~175h
'''Duration:''' ~175h
'''Difficulty:''' Medium


'''Mentor''': Emmet, backup: Tiar
'''Mentor''': Emmet, backup: Tiar
Line 323: Line 419:
'''Technical details link''': https://rickyhan.com/jekyll/update/2018/11/22/pixel-art-algorithm-pixel-perfect.html
'''Technical details link''': https://rickyhan.com/jekyll/update/2018/11/22/pixel-art-algorithm-pixel-perfect.html


==== => Project: Extend Arrange Docker for layers plus snapping ====
 
=== Extend Arrange Docker for layers plus snapping ===
'''Brief explanation''': Currently, the arrange docker only supports aligning and distributing vector objects of a singlet vector layer. This project aims to extend the arrange docker support for layers and masks too.
'''Brief explanation''': Currently, the arrange docker only supports aligning and distributing vector objects of a singlet vector layer. This project aims to extend the arrange docker support for layers and masks too.


Line 331: Line 428:


'''Duration:''' ~350h
'''Duration:''' ~350h
'''Difficulty:''' Medium


'''Mentor''': Wolthera
'''Mentor''': Wolthera
Line 336: Line 435:
'''Link''': https://bugs.kde.org/show_bug.cgi?id=338002
'''Link''': https://bugs.kde.org/show_bug.cgi?id=338002


 
=== Ribbon Brush ===
==== => Project (Advanced): Ribbon Brush ====


'''Brief explanation''': In other art programs there is a brush engine/tip that can take a raster image and while painting a stroke, distort copies of that image in a way that they seemlessly fit together. It's most common usages are chains, laces at the end of the clothes, braids, textured strings etc. Few examples: [https://krita-artists.org/uploads/default/original/3X/d/4/d49a8cbab365e61dc9245a1d83beadd8cd481312.png] A picture of technical explanation: [https://krita-artists.org/uploads/default/original/3X/8/f/8f8c2c453f48e6b24198ae28a77dd7014f846210.png]
'''Brief explanation''': In other art programs there is a brush engine/tip that can take a raster image and while painting a stroke, distort copies of that image in a way that they seemlessly fit together. It's most common usages are chains, laces at the end of the clothes, braids, textured strings etc. Few examples: [https://krita-artists.org/uploads/default/original/3X/d/4/d49a8cbab365e61dc9245a1d83beadd8cd481312.png] A picture of technical explanation: [https://krita-artists.org/uploads/default/original/3X/8/f/8f8c2c453f48e6b24198ae28a77dd7014f846210.png]
Line 348: Line 446:


'''Duration:''' ~350h
'''Duration:''' ~350h
'''Difficulty:''' Hard


'''Mentor''': TBD
'''Mentor''': TBD
Line 353: Line 453:
'''Link''': https://krita-artists.org/t/ribbon-brush/31346
'''Link''': https://krita-artists.org/t/ribbon-brush/31346


=== KDE Games ===
== KStars ==
==== Implement a Computer Opponent for a Mancala Game ====
=== Ekos Imaging Pipeline ===
 
'''Brief explanation:''' Implement Ekos node-based Imaging pipeline with multiple concrete nodes to support live stacking of images. Each node takes an image, configuration, and produces an output image along with metadata to pass to the next stage.
 
'''Expected results:''' Ability to live stack images in Ekos
 
'''Knowledge Prerequisite:''' C++ / Qt
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Hard
 
'''Mentors:''' Jasem Mutlaq @jasem:kde.org
 
=== Project: FITSViewer & Photometry Improvements ===
'''Brief explanation''': The FITSViewer is used to display [https://fits.gsfc.nasa.gov/fits_standard.html FITS] images as captured by cameras or opened by the user. It supports 8, 16, 32, and 64bit formats with either a single channel (Mono or Bayer) or RGB cube. The goal for this project is to provide efficient and intuitive controls for:
# '''Noise Calculation''': Calculate the overall Signal-to-Noise (SNR) radio for the overall image, or a specific subframe of the image.
# '''Sky Glow Computation''': Estimation of Sky Glow component in image of various exposures. Each captured image is affected by multiple sources of noise, only of which is the sky glow which in turn is affected by the atmosphere, pollution, and artificial sources (e.g. light). The objective is to propose to the user the optimum exposure time given the sky glow contribution to the image.
# '''Mask Overlay''': Ability to select custom mask over stars to aid in focusing and photometry.
# '''Photometry''': KStars includes SEP which can be used to extract sources from stellar images and also performs aperture photometry. A new tool should be developed to aid the users to perform photometric work with the images including reduction of images (darks & flats) with various optimization/algorithmic settings. Additionally, the tool provides means for aperture photometry calculations as well.
Since FITSViews typically deals with very high-resolution images, such calculations can be very computationally expensive. It is expected that a very efficient multi-threaded code to be developed to take advantage of all the available cores on the system and any hardware or instruction set optimizations to achieve the smoothest user experience.
 
'''Expected results''':
* Improved Histogram Tool.
* SNR, Sky Glow, and Photometry calculations.
* Photometric reductions. Aperture photometry.
 
'''Knowledge Prerequisite''': C++, Qt, Threading, Data Structures
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Hard
 
'''Mentor''': Jasem Mutlaq ([https://webchat.kde.org/#/room/#kstars:kde.org KDE Web Chat]: Jasem)
 
==== Project: Observation Wizard Improvements ====
'''Brief explanation''': The Observation Wizard enables users to select and filter objects of interest to them . Currently, the selection is done by object type, location, and magnitude in the sky. Further, the user can filter objects based on altitude and time-range when they are available. This tool can be further improved by providing the following features:
# '''INDI Integration''': Filter and sort by object size for Deep Sky Objects that have a physical width and height, unlike point-like sources like stars. Limit objects to fall within a particular percentage of the sensor. For example, M31 galaxy is very large and spans almost 3 degrees in the night sky. It would not fit inside the camera's 1x1 degree field of view (as calculated from INDI). Similarly, an object spanning on 5'x5' arcmins is too small in the camera.
# '''Image Integration''': The way the final list of objects are displayed should be modernized. Each object should have an image and also an Altitude-vs-Time plot next to it so that the user can quick identify what is the best time to observe this object. For large lists, this can be very CPU intensive and should be optimized accordingly.
# '''Save/Load''': Ability to save and load the wizard search parameters for future use so that the user does not always have to start from scratch every time they need to search for objects.
# '''Export''': Export the list of object to an external file or source in CSV and JSON formats.
 
'''Expected results''':
* Improved Observation Wizard Tool.
* Proper integration with INDI & Ekos.
 
'''Knowledge Prerequisite''': C++, Qt, Data Structures
 
'''Duration:''' 175 hours
 
'''Difficulty:''' Hard
 
'''Mentor''': Jasem Mutlaq ([https://webchat.kde.org/#/room/#kstars:kde.org KDE Web Chat]: Jasem)
 
== KDE Games ==
=== Implement a Computer Opponent for a Mancala Game ===


'''Brief explanation:''' Mancala games such as Bao, Bohnenspiel, Kalah, Oware, Pallanghuzi and Sungka are strategy games played all over the world. The project would entail creating a KDE application for a Mancala game, with a main focus on a good computerized opponent.  As an example [https://naml.us/paper/kalah/ Kalah has been solved] but only certain board sizes maybe fully implemented to work on a typical desktop or mobile device.
'''Brief explanation:''' Mancala games such as Bao, Bohnenspiel, Kalah, Oware, Pallanghuzi and Sungka are strategy games played all over the world. The project would entail creating a KDE application for a Mancala game, with a main focus on a good computerized opponent.  As an example [https://naml.us/paper/kalah/ Kalah has been solved] but only certain board sizes maybe fully implemented to work on a typical desktop or mobile device.
Line 364: Line 519:
'''Duration:''' 175 hours
'''Duration:''' 175 hours


'''Difficulty:''': Medium
'''Difficulty:''' Medium


'''Mentor:''' Benson Muite - benson_muite at emailplus dot org
'''Mentor:''' Benson Muite - benson_muite at emailplus dot org
== LabPlot ==
LabPlot is a free, open source and cross-platform data visualization and analysis software.
=== 3D Visualization ===
'''Brief explanation:''' At the moment LabPlot supports 2D plotting only. The purpose of this project is to extend the current feature set and to provide support for 3D plots. The available 3D frameworks, see for example https://wiki.qt.io/Using_3D_engines_with_Qt, have to be evaluated and we need to decide whether we use an already existing framework or our own implementation of the relevant algorithms.
'''Expected results:''' For the initial implementation it's expected to support the common 3D visualizations relevant for LabPlot's user base (curves, surfaces, fields, etc.) and it should be possible to edit the most important properties similar to how it's done for 2D plot types.
'''Knowledge Prerequisite:''' C++/Qt
'''Duration:''' 350 hours
'''Difficulty:''' Hard
'''Mentor:''' Alexander Semke
== Lokalize ==
Lokalize is a program used to aid in translation, and is often used to translate KDE applications.
=== Improve translation suggestions ===
'''Project type:''' Coding
'''Brief explanation:''' Improve usability of translation memory in Lokalize. There is scope for creativity, possible ideas include supplementing the rule based approach with other machine learning techniques or allowing for import of translation memories.
'''Expected results:''' More pleasant and efficient translation experience. Greater consistency between translations of KDE applications.
'''Knowledge Prerequisite:''' C++
'''Duration:''' 175 hours
'''Difficulty:''' Medium/Hard
'''Mentor:''' Benson Muite - benson_muite at emailplus.org
== Kdenlive ==
Kdenlive is a cross platform, open source, video editing software.
=== Improved subtitling support ===
'''Brief explanation:''' Currently, Kdenlive saves its subtitles in the SRT format, which only allows very basic styling features - that means only one style for the complete subtitle file. A more advanced file format like ASS (SubStation Alpha Subtitles) would allow much more powerful styling, for example attributing different styles to different speakers, proper styling (using bold, italic or colors on words or sentences only), etc. Currently, Kdenlive can already read basic ASS files (without styling support).
'''Expected results:''' Opening and saving an ASS subtitle and keeping the styling infos, implement a widget allowing to create styles and attribute a style to a subtitle sentence, or add some attributes like bold to selected parts of the text.
'''Knowledge Prerequisite:''' C++/Qt
'''Duration:''' ~175 hours
'''Difficulty:''' Medium
'''Mentor:''' Jean-Baptiste Mardelle (@j-b-m:matrix.org)

Latest revision as of 08:14, 9 March 2024

Konqi is giving a lesson!

See also: GSoC Instructions, Last year ideas

Guidelines

Information for Students

These ideas were contributed by our developers and users. They are sometimes vague or incomplete. If you wish to submit a proposal based on these ideas, you are urged to contact the developers and find out more about the particular suggestion you're looking at.

Becoming accepted as a Google Summer of Code student is quite competitive. Accepted students typically have thoroughly researched the technologies of their proposed project and have been in frequent contact with potential mentors. Simply copying and pasting an idea here will not work. Neither generating a proposal with ChatGPT or equivalent! On the other hand, creating a completely new idea without first consulting potential mentors rarely works.

When writing your proposal or asking for help from the general KDE community don't assume people are familiar with the ideas here. KDE is really big!

If there is no specific contact given you can ask questions on the general KDE development list [email protected]. See the KDE mailing lists page for information on available mailing lists and how to subscribe.

Note

These are all proposals! We are open to new ideas you might have!! Do you have an awesome idea you want to work on with KDE but that is not among the ideas below? That's cool. We love that! But please do us a favor: Get in touch with a mentor early on and make sure your project is realistic and within the scope of KDE.


Adding a Proposal

When adding an idea to this section, please include the following data:

  • if the application is not widely known, a description of what it does and where its code lives
  • a brief explanation (2-5 sentences)
  • the expected size of the project (small-90 hours, medium-175 hours or large-350 hours)
  • the expected results
  • pre-requisites for working on your project (skills required/preferred)
  • if applicable, links to more information or discussions
  • mailing list or IRC channel for your application/library/module
  • your name and email address for contact (if you're willing to be a mentor)
  • if possible, an easy, medium or hard rating of the project

If you are not a developer but have a good idea for a proposal, get in contact with relevant developers first.

Note

Follow this template!


Project: Something that you're totally excited about

Brief explanation: Do you have an awesome idea you want to work on with KDE but that is not among the ideas below? That's cool. We love that! But please do us a favor: Get in touch with a mentor early on and make sure your project is realistic and within the scope of KDE. That will spare you and us a lot of frustration.

Expected results: Something you and KDE loves

Knowledge Prerequisite: Probably C++ and Qt but depends on your project

Duration: Mention one of ~90, ~175 or ~350 hours of effort necessary to finish the project. Use only one of these three project classes and don't come up with other numbers here.

Difficulty: Easy, medium or difficult project

Mentor: Try to see who in KDE is interested in what you want to work on and approach them. If you are unsure you can always ask in #kde-soc:kde.org on matrix.


Ideas

KDE Frameworks

Python bindings for KDE Frameworks

Brief explanation: While Qt itself, has official bindings to Python, this is not the case for the KDE Frameworks. This project hopes to add python bindings to as many frameworks as possible during the summer.

Expected results: Make it easier to build Python apps with Qt

Knowledge Prerequisite: C++ and Python knowledge. Having read https://doc.qt.io/qtforpython-6/ https://doc.qt.io/qtforpython-6/shiboken6/index.html and https://www.kdab.com/creating-python-bindings-for-qt-libraries/ is a good start

Duration: Flexible depending on the amount of frameworks we want to cover during this GSoC (175 or 350 hours).

Difficulty: Medium

Mentor: Carl Schwan - @carl:kde.org on matrix


Port oss-fuzz tests to Qt6

Project type: Coding

Brief explanation: oss-fuzz is a fuzzying tool that runs continuously trying to find security issues in our software. Currently the oss-fuzz tests on KDE Frameworks are run using Qt5 which is not optimal since Qt6 is where our main development focus is (kimageformats or kcodecs examples).

Expected results: oss-fuzz tests run with Qt6 instead of Qt5. If extra time allows it, add more KDE Frameworks testing to oss-fuzz

Knowledge Prerequisite: cmake/compiling/static libraries

Duration: 175 hours

Difficulty: Medium/Hard

Mentor: Albert Astals Cid <[email protected]>


ISO Image Writer to Qt Quick

Project type: Coding

Brief explanation: Port ISO Image Writer to Qt Quick

Expected results: A more shiney UI

Knowledge Prerequisite: C++, QML

Duration: 175 hours

Difficulty: Medium

Mentor: Jonathan Riddell jr @ jriddell.org


Release Scripts Using invent.kde.org (Gitlab)

Project type: Coding

Brief explanation: Write release scripts for our apps and libraries which uses the Gitlab infrastructure on invent.kde.org

Expected results: Slicker release process

Knowledge Prerequisite: Gitlab API using maybe Ruby or something similar

Duration: 175 hours

Difficulty: Medium

Mentor: Jonathan Riddell jr @ jriddell.org Harald Sitter sitter @ kde.org


KDE Connect

The following are ideas for the KDE Connect Android, iOS and desktop apps. Feel free to also take a look at the curated list of tasks in the meta repo.

Update SSH library in the Android app

Project type: Coding

Brief explanation: KDE Connect is a desktop and phone app that lets you devices communicate. https://kdeconnect.kde.org/

The Remote File Browser plugin works by running an SFTP server on Android and connecting to it using SSHFS from the desktop.

The SFTP server implementation we use in Android is from Apache mina-sshd. This is a Java library. However, due to some differences in the way to access the filesystem in Android, the latest version we managed to get working is 0.14 from 2015.

The goal of this task is to upgrade to a recent version. You can see all the released versions here: https://mvnrepository.com/artifact/org.apache.sshd/sshd-core

One API that newer versions of Apache Mina use is java.nio.file, which wasn't available in Android until API 26. We currently support down to API 21, but we can bump the requirement to API 26 if required to update this library (maybe nio file can be dessugared, though?). In any case, there probably are more incompatibilities that we need to solve to be able to upgrade.

Expected results: We get rid of the old mina sshd library used in the Android app for remote file access, and we use either a new version or something else.

Knowledge Prerequisite: This should only require changes to the Android app, which is written in Java & Kotlin.

Mentor: Albert Vaca Cintora <[email protected]>

Allow sharing non-text clipboard contents

Project type: Coding

Brief explanation: KDE Connect is a desktop and phone app that lets you devices communicate. https://kdeconnect.kde.org/ Currently we only sync the clipboard if it contains text. However, the clipboard can contain a variety of data. One of the most common cases besides text are images.

The APIs we use to read the clipboard let us read and write images:

  • In Qt the clipboard has a mimetype field of type QMimeData which can be asked for hasImage (in addition to hasUrls and hasHtml [1])
  • On the Android side, we can use ClipboardManager's setPrimaryClip to set the different types of clipboard.

To support this, in addition to the text-only "content" field we will need to send a mime-type field with the mimetype of the clipboard. For image (or any future non-text) mimetypes, an attached payload will contain the image data. To not transfer huge payloads because of this, we should set an upper size limit (eg: 1 MB, we can change this in a future or even make it configurable).

[1] We probably don't care about URLs because they can be sent as text and they still work, but in a future it might be interesting to also support HTML so we can sync formatted text.

Expected results: We can copy-paste images and formatted text across platforms.

Knowledge Prerequisite: The desktop app is written in C++/Qt, the Android app in Java & Kotlin, and the iOS app in Swift.

Mentor: Albert Vaca Cintora <[email protected]>


Arianna

Port Arianna to Foliate-js

Brief explanation: Arianna is an ebook reader and currently use epub.js, which is not really maintained anymore. The idea would be to port it https://github.com/johnfactotum/foliate-js which is modern epub renderer used by foliate.

Expected results: A nice and modern epub renderer for Arianna

Knowledge Prerequisite: Javascript knowledge and minimal C++ knowledge to build the project

Duration: 175 hours

Difficulty: Medium

Mentor: Carl Schwan - @carl:kde.org on matrix

GCompris

Add support for multiple numeral system in GCompris

Brief explanation: For now, GCompris numbers are always displayed as Western Arabic numbers (0, 1, ...). There are several systems in the world and Qt/Javascript provides us ways to select the ones we want. The aim of the task is to add the handling of multiple systems and update all the places we display numbers to use the new system. A bit more details are available in https://phabricator.kde.org/T16332.

Expected results: Ability to change numeral system and change it on all the code.

Knowledge Prerequisite: Basics on Javascript and C++

Duration: 175 hours

Difficulty: Easy

Mentors: Emmanuel Charruau @allon:kde.org / Harsh Kumar @hadron43:kde.org / Johnny Jazeix @johnnyj:kde.org. But please join #gcompris:kde.org to discuss with the team.

sddm-kcm

Harden sddm-kcm

Project type: Coding

Brief explanation: sddm-kcm is a system settings module to setup sddm, the SUSE security team has found some issues that while not immediately exploitable we would ideally fix. It would also include improving KAuth to support passing file descriptors between the main process and the helper instead of paths.

Expected results: Most/All of the issues identified are fixed.

Knowledge Prerequisite: Some C++/Unix/polkit knowledge is welcome.

Duration: 175 hours

Difficulty: Medium/Hard

Mentor: Albert Astals Cid <[email protected]>

Okular

Okular is a universal document viewer developed by KDE. Okular works on multiple platforms, including but not limited to Linux, Windows, Mac OS X, *BSD. Contact the Okular developers.

Improve Forms/Javascript support

Project type: Coding

Brief explanation: Okular supports PDF files with Forms, many of those use Javascript to make the Forms functionality nicer to users. We only support some of the Javascript features, the aim of this project is to improve the support for it.

Expected results: Most/All of the issues identified are fixed.

Knowledge Prerequisite: C++/Javascript

Duration: 175 hours

Difficulty: Medium/Hard

Mentor: Albert Astals Cid <[email protected]>

Krita

Krita is a digital painting application, used by millions of people all over the world. For Google Summer of Code, we expect students to already have contributed to Krita by building the application and submitting merge requests for some bug fixes. Note that some projects also demand a good knowledge of algorithms and skill in doing research. Even if there are a lot of ideas, only 3 contributors maximum will be selected for Krita this year.

Averaged/Mixed Color Selector

Brief explanation: Design improvements to Digital Colors Mixer (+ Mixer Slider Docker) with users feedback (including adding a possibility of a gradient cross all channels for custom colors).

Expected results: Gathering user feedback for Digital Colors Mixer and Mixer Slider Docker on Krita-Artists forum. Creating a design based on that feedback (and running through the forum to ensure completeness). Finally, implement the design (this is expected to be a small project with only some changes to UI and underlying logic; if the user feedback proves the dockers need more work than that, we'll adjust by pointing which of the requested features needs to be implemented for the project to be considered finished).

Knowledge Prerequisite: C++, Qt

Difficulty: Medium

Duration: ~90h

Mentor: Tiar, backup: Wolthera

Link: https://bugs.kde.org/show_bug.cgi?id=363315


Saving curves

Brief explanation: There are several places in Krita where we use a specific type of a curve. There is no way to save them or copy to another part of the interface. This project intends to fill that gap.

Expected results: Save and load plus copy and paste curves in any place Krita uses curves. It needs to be both nice to use and not getting in a way for users who don't use them. The saving itself (into a string) is done, what's left is UI/UX work to include it everywhere.

Knowledge Prerequisite: C++, Qt, UI

Duration: ~90h

Difficulty: Medium

Mentor: Tiar

Links: Color Adjustment curves bug report link, Brush editor curves bug report link, Brush sensors curves bug report link, Pressure curves bug report link


Precision and new units in guides

Brief explanation: Users should be able to edit guides by entering the new value, and they should allow more units than just pixels.

Expected results: Ditto.

Knowledge Prerequisite: C++, Qt

Duration: ~90h

Difficulty: Medium

Mentor: Wolthera

Link: https://bugs.kde.org/show_bug.cgi?id=376943


Merging masks

Brief explanation: Krita has several types of masks, this is about Transparency Masks, with Local Selections, Filter Masks and Colorize Masks as a stretch goal. The project is to add a way to merge masks together.

Expected results: Add merging of masks in AND and OR modes. Preferably one of those modes (OR, probably) should be more easily accessible/treated as default, but both must be possible.

Knowledge Prerequisite: C++, Qt, math

Duration: ~90h

Difficulty: Medium

Mentor: Tiar

Link: https://bugs.kde.org/show_bug.cgi?id=380141


Onion Skin Shift & Trace

Brief explanation: It's a feature that is really important for animators. It allows the user to move and rotate onion skins which makes tracing changing objects in motion way easier. It must be designed with professional animators in mind, not just casual users.

Expected results: Usable "shift & trace" mechanic (with rotation as well, not just moving/panning).

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Emmet

Link: Krita Artists feature request Bug report link


Selection Action Bar

Brief explanation: A floating bar, similar to assistants handles, containing several of the most useful actions. Suggested list of options (can change after discussions with users): Invert selection, crop to selection (layer or image), fill selection with foreground color, copy (or cut?) selected content to new layer, transform selected content, deselect selection, and a move handle for the bar itself.

Expected results: Floating bar fully implemented and usable.

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Emmet, Wolthera or Tiar

Link: https://krita-artists.org/t/selection-action-bar/48767


New option in Color Sampler

Brief explanation: Users often want to sample colors from specific layers. This project should add at least two of the following options: “Current layer and below”, “Current layer and below, without filters”, ”All layers except current one”, “Color Labeled Layers” (selecting and merging color labeled layers is already implemented). In addition to that, it should contain two new actions, one for sampling the foreground color according to the Color Sampler tool options, and another for sampling the background color with those options.

Expected results: At least two of the modes, PLUS the two actions/shortcuts.

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Tiar, Emmet or Wolthera

Links: Feature request on KA about Color Labeled Layers option, Bug report about "Current and below" and "Current and below without filter layers" options, Bug report about "All layers except the current one" option.


Waveform in animation track

Brief explanation: Waveform is very useful for animators to sync the animation to the sound (for example lip syncing). Note that waveform generation is already implemented in MLT, the multimedia library Krita is using.

Expected results: Easily accessible or constantly visible waveform in the Animation Timeline docker

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Emmet

Link: https://bugs.kde.org/show_bug.cgi?id=393140


Summary frames on groups

Brief explanation: Animation related project. Contact Emmet for more details.

Expected results: Summary frames on group layers

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Emmet

Link: https://bugs.kde.org/show_bug.cgi?id=437026


Improve Compositions Docker's Batch Export Features

Brief explanation: The current Compositions Docker does feature exporting and batch exporting, but currently lacks configuration for image or animation export settings. It could use more control over how all compositions are exported.

Expected results: Configurable export settings for the composition docker, and API improvements to allow for reuse of existing export GUI window(s).

Knowledge Prerequisite: C++, Qt, CMake

Duration: ~175h

Difficulty: Medium

Mentor: TBD


Pixel Perfect Hand-drawn Lines

Brief explanation: In Pixel Art dedicated programs the line painted by the "pencil" tool (1px solid pixel brush) is not just following the user's mouse/pen's coordinates, but removing duplicate pixels in a smart way, resulting in a so-called "pixel perfect" line. Example: [1] The task is to implement such feature in Krita.

Expected results: A feature in the Pixel Engine working as described

Knowledge Prerequisite: C++, Qt

Duration: ~175h

Difficulty: Medium

Mentor: Emmet, backup: Tiar

Feature request link: https://krita-artists.org/t/pixel-perfect-line-setting-for-pixel-art-brushes/42629

Technical details link: https://rickyhan.com/jekyll/update/2018/11/22/pixel-art-algorithm-pixel-perfect.html


Extend Arrange Docker for layers plus snapping

Brief explanation: Currently, the arrange docker only supports aligning and distributing vector objects of a singlet vector layer. This project aims to extend the arrange docker support for layers and masks too.

Expected results: All the current operations available in Arrange docker could be done with the layers.

Knowledge Prerequisite: C++, Qt, CMake

Duration: ~350h

Difficulty: Medium

Mentor: Wolthera

Link: https://bugs.kde.org/show_bug.cgi?id=338002

Ribbon Brush

Brief explanation: In other art programs there is a brush engine/tip that can take a raster image and while painting a stroke, distort copies of that image in a way that they seemlessly fit together. It's most common usages are chains, laces at the end of the clothes, braids, textured strings etc. Few examples: [2] A picture of technical explanation: [3]

Note that this is an advanced project and you need to be a good student to be able to complete it (you will have help but you need to have a solid foundation beforehand). We also require either some code examples or some kind of proof-of-concept in the proposal. Make sure to contact us early (contact info above).

Expected results: Fully usable brush tip or brush engine

Knowledge Prerequisite: C++, Qt, math

Duration: ~350h

Difficulty: Hard

Mentor: TBD

Link: https://krita-artists.org/t/ribbon-brush/31346

KStars

Ekos Imaging Pipeline

Brief explanation: Implement Ekos node-based Imaging pipeline with multiple concrete nodes to support live stacking of images. Each node takes an image, configuration, and produces an output image along with metadata to pass to the next stage.

Expected results: Ability to live stack images in Ekos

Knowledge Prerequisite: C++ / Qt

Duration: 175 hours

Difficulty: Hard

Mentors: Jasem Mutlaq @jasem:kde.org

Project: FITSViewer & Photometry Improvements

Brief explanation: The FITSViewer is used to display FITS images as captured by cameras or opened by the user. It supports 8, 16, 32, and 64bit formats with either a single channel (Mono or Bayer) or RGB cube. The goal for this project is to provide efficient and intuitive controls for:

  1. Noise Calculation: Calculate the overall Signal-to-Noise (SNR) radio for the overall image, or a specific subframe of the image.
  2. Sky Glow Computation: Estimation of Sky Glow component in image of various exposures. Each captured image is affected by multiple sources of noise, only of which is the sky glow which in turn is affected by the atmosphere, pollution, and artificial sources (e.g. light). The objective is to propose to the user the optimum exposure time given the sky glow contribution to the image.
  3. Mask Overlay: Ability to select custom mask over stars to aid in focusing and photometry.
  4. Photometry: KStars includes SEP which can be used to extract sources from stellar images and also performs aperture photometry. A new tool should be developed to aid the users to perform photometric work with the images including reduction of images (darks & flats) with various optimization/algorithmic settings. Additionally, the tool provides means for aperture photometry calculations as well.

Since FITSViews typically deals with very high-resolution images, such calculations can be very computationally expensive. It is expected that a very efficient multi-threaded code to be developed to take advantage of all the available cores on the system and any hardware or instruction set optimizations to achieve the smoothest user experience.

Expected results:

  • Improved Histogram Tool.
  • SNR, Sky Glow, and Photometry calculations.
  • Photometric reductions. Aperture photometry.

Knowledge Prerequisite: C++, Qt, Threading, Data Structures

Duration: 175 hours

Difficulty: Hard

Mentor: Jasem Mutlaq (KDE Web Chat: Jasem)

Project: Observation Wizard Improvements

Brief explanation: The Observation Wizard enables users to select and filter objects of interest to them . Currently, the selection is done by object type, location, and magnitude in the sky. Further, the user can filter objects based on altitude and time-range when they are available. This tool can be further improved by providing the following features:

  1. INDI Integration: Filter and sort by object size for Deep Sky Objects that have a physical width and height, unlike point-like sources like stars. Limit objects to fall within a particular percentage of the sensor. For example, M31 galaxy is very large and spans almost 3 degrees in the night sky. It would not fit inside the camera's 1x1 degree field of view (as calculated from INDI). Similarly, an object spanning on 5'x5' arcmins is too small in the camera.
  2. Image Integration: The way the final list of objects are displayed should be modernized. Each object should have an image and also an Altitude-vs-Time plot next to it so that the user can quick identify what is the best time to observe this object. For large lists, this can be very CPU intensive and should be optimized accordingly.
  3. Save/Load: Ability to save and load the wizard search parameters for future use so that the user does not always have to start from scratch every time they need to search for objects.
  4. Export: Export the list of object to an external file or source in CSV and JSON formats.

Expected results:

  • Improved Observation Wizard Tool.
  • Proper integration with INDI & Ekos.

Knowledge Prerequisite: C++, Qt, Data Structures

Duration: 175 hours

Difficulty: Hard

Mentor: Jasem Mutlaq (KDE Web Chat: Jasem)

KDE Games

Implement a Computer Opponent for a Mancala Game

Brief explanation: Mancala games such as Bao, Bohnenspiel, Kalah, Oware, Pallanghuzi and Sungka are strategy games played all over the world. The project would entail creating a KDE application for a Mancala game, with a main focus on a good computerized opponent. As an example Kalah has been solved but only certain board sizes maybe fully implemented to work on a typical desktop or mobile device.

Expected results: A good computerized opponent

Knowledge Prerequisite: Some programming background in a compiled language such as C, C++, Java, Kotlin, Rust but not limited to these.

Duration: 175 hours

Difficulty: Medium

Mentor: Benson Muite - benson_muite at emailplus dot org


LabPlot

LabPlot is a free, open source and cross-platform data visualization and analysis software.

3D Visualization

Brief explanation: At the moment LabPlot supports 2D plotting only. The purpose of this project is to extend the current feature set and to provide support for 3D plots. The available 3D frameworks, see for example https://wiki.qt.io/Using_3D_engines_with_Qt, have to be evaluated and we need to decide whether we use an already existing framework or our own implementation of the relevant algorithms.

Expected results: For the initial implementation it's expected to support the common 3D visualizations relevant for LabPlot's user base (curves, surfaces, fields, etc.) and it should be possible to edit the most important properties similar to how it's done for 2D plot types.

Knowledge Prerequisite: C++/Qt

Duration: 350 hours

Difficulty: Hard

Mentor: Alexander Semke


Lokalize

Lokalize is a program used to aid in translation, and is often used to translate KDE applications.

Improve translation suggestions

Project type: Coding

Brief explanation: Improve usability of translation memory in Lokalize. There is scope for creativity, possible ideas include supplementing the rule based approach with other machine learning techniques or allowing for import of translation memories.

Expected results: More pleasant and efficient translation experience. Greater consistency between translations of KDE applications.

Knowledge Prerequisite: C++

Duration: 175 hours

Difficulty: Medium/Hard

Mentor: Benson Muite - benson_muite at emailplus.org

Kdenlive

Kdenlive is a cross platform, open source, video editing software.

Improved subtitling support

Brief explanation: Currently, Kdenlive saves its subtitles in the SRT format, which only allows very basic styling features - that means only one style for the complete subtitle file. A more advanced file format like ASS (SubStation Alpha Subtitles) would allow much more powerful styling, for example attributing different styles to different speakers, proper styling (using bold, italic or colors on words or sentences only), etc. Currently, Kdenlive can already read basic ASS files (without styling support).

Expected results: Opening and saving an ASS subtitle and keeping the styling infos, implement a widget allowing to create styles and attribute a style to a subtitle sentence, or add some attributes like bold to selected parts of the text.

Knowledge Prerequisite: C++/Qt

Duration: ~175 hours

Difficulty: Medium

Mentor: Jean-Baptiste Mardelle (@j-b-m:matrix.org)