KDEConnect/Build Windows

X. DEVELOPER RECOMMENDATIONS

In case you get stuck, check out these recommendations for the build process.

• As a developer you'd naturally want to be able to test out all the features offered by KDE Connect. Right now MSVC does the best job as a compiler for KDE Connect for Windows, so you may choose that.
• We recommend to install Craft in C:/ [default] as the guide uses C:/ as the installation directory.
• Check out Craft docs for more help on how to use it.

0. SETTING UP ENVIRONMENT

The environment for KDE Connect on Windows simply consists of two parts- A compiler of choice and a build system. While we do have a couple of options for the compiler, our recommended build system is Craft. While this is an all-in-one build guide, you should definitely refer to Craft's documentation for further information on using the build system in your development environment!

Choose your compiler of choice

MSVC (full-support) | MinGW-w64 (partial support)

0.1-A installing MSVC

1. Install Visual Studio 2019 (Community) from here and select Desktop development with C++.

2. Install these packages.

• • Just-in-Time debugger
  • VC++ 2019 version
  • C++ profiling tools
  • Windows 10 SDK
  • Visual C++ tools for CMake
  • Visual C++ ATL for x86 and x64
  • Test Adapter for Boost.Test
  • Test Adapter for Google Test

0.1-B installing MinGW-w64

1. Install MinGW-w64 through the GUI installer located here.

2. While installing Craft, feel free to select Mingw-w64 as your compiler!

Afterward, there is no difference in the commands used in the development. Note that due to the lacking of some definitions in MinGW provided header file, some plugins could not be compiled with all functions on Windows using MinGW.

This is still an experimental feature, and you might need some developer know-how to get past any build problems.

0.2 installing Craft

1. Call the following commands in a Powershell window with Administrator Privileges

Set-ExecutionPolicy -Scope CurrentUser RemoteSigned
iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/KDE/craft/master/setup/install_craft.ps1'))

2. During command 2, select Visual Studio 19 if you chose MSVC earlier, otherwise Mingw-w64 as your compiler.

Select compiler
[0] Mingw-w64, [1] Microsoft Visual Studio 2017, [2] Microsoft Visual Studio 2019 (default is Microsoft Visual Studio 2017): 2
Select architecture
[0] x86 [1] x64 (Default is x64): 1

3. When the installation is done, note the Environment variables to match the ones in the top of this image:-

[Environment]
PATH=

Craft                : C:\CraftRoot
Version              : master
ABI                  : windows-msvc2019_64-c1
Download directory   : C:\CraftRoot\download

1. BUILDING KDE CONNECT OUT OF LATEST SOURCE CODE

Craft has automated most of the redundant parts of the build process and exposed just the really useful parameters like which version to build, where to install et al.

1. Open Craft CraftRoot from search (in taskbar).

2. Run the following commands now.

# First, we set the various dependencies of kdeconnect-kde to be installed from the code in the master branch.

craft --set version=master kdeconnect-kde
craft --set version=master craft
craft --set version=master kirigami
craft --set version=master kde/frameworks/tier3
craft --set version=master dev-utils/snoretoast
craft --set version=master kde/frameworks/tier1/sonnet
craft --set version=master libs/libssh2
craft --set version=master kde/frameworks/tier3/kio
craft --set version=master kde/kdenetwork/kio-extras
craft --set version=master kde/frameworks/tier1/kcoreaddons
craft --set version=master kde/frameworks/tier2/kauth
craft --set version=master kde/frameworks/extra-cmake-modules
craft --set version=master kde/frameworks/tier1/kwindowsystem
craft --set version=master kde/frameworks/tier1/kconfig
craft --set version=master kde/frameworks/tier1/kcodecs
craft --set version=master kde/frameworks/tier1/kwidgetsaddons
craft --set version=master kde/frameworks/tier1/kitemviews 
craft --set version=master kde/frameworks/tier1/kguiaddons 
craft --set version=master kde/frameworks/tier2/kcrash 
craft --set version=master kde/frameworks/tier1/kdbusaddons 
craft --set version=master kde/frameworks/tier2/kdoctools 
craft --set version=master kde/frameworks/tier1/karchive 
craft --set version=master kde/frameworks/tier2/kcompletion 
craft --set version=master kde/frameworks/tier3/kiconthemes 
craft --set version=master kde/frameworks/tier1/solid 
craft --set version=master kcontacts
craft --set version=master ki18n
craft --set version=master kjobwidgets
craft --set version=master kpackage
craft --set version=master breeze-icons
craft --set version=master kconfigwidgets

# Now we install kdeconnect-kde within CraftRoot.

craft -i kdeconnect-kde 

# Get source for qtbase for debugging

craft --fetch --unpack libs/qt5/qtbase

# If everything went fine, you're ready!

3. To enable callbacks for the Windows notifications, run this command from within the same terminal.

C:/CraftRoot/bin/snoretoast.exe -install "KDE Connect DEV" "C:/CraftRoot/bin/kdeconnectd.exe" "kdeconnect.daemon"

2. TESTING CHANGES

Once you make some changes, simply run

craft --compile --install --qmerge kdeconnect-kde

This will update the kdeconnect-kde package installed within $CraftRoot to reflect latest changes in the kdeconnect-kde repository. (Accessible via cs kdeconnect-kde)

Warning: Do not run craft -i kdeconnect-kde ! This command changes the current branch to master in the codebase.

3. BUILDING A SHARE-ABLE INSTALLER

Choose your package of choice:-

.EXE Setup (full-support) | .Appx package for Windows Store (partial support)

3.1-A creating a desktop application .exe setup

0. Make sure PackageType is set as PackageType = NullsoftInstallerPackager in CraftRoot/etc/CraftSettings.ini.

1. To create an installable setup, you need NSIS- a open source system to create Windows installers. Install it by this command: craft nsis

3.1-B creating a Windows App .Appx package

0. Make sure PackageType is set as PackageType = AppxPackager in CraftRoot/etc/CraftSettings.ini.

3.2 packaging through Craft

1. Now you can use the --package flag to build an installer. Run this in Craft CraftRoot.

craft --package extragear/kdeconnect-kde

Note: The output files are saved here: C:\CraftRoot\tmp\

FAQs : FREQUENTLY ASKED QUESTIONS

We are only human! There are many doubts that we face commonly, during DevSprints and during the onboarding of new contributors. We'd like to expedite this process for you by enlisting all the commonly asked questions in one place so you don't have to ask around like others had to!

1. I see double plugins in my KDE Connect installation. How do I fix it?

Just rename your CraftRoot/ folder to something different. Even CraftRoot1/ will work! Applications packaged by Craft look in CraftRoot/ for the plugins first and then into their own installation folder.

2. I don't get the notification buttons, and the application name in the notifications is weird (something like kdeconnect.daemon. How do I fix it?

Just run this command:

C:\CraftRoot\bin\SnoreToast.exe -install "KDE Connect DEV" "C:/CraftRoot/bin/kdeconnectd.exe" "org.kde.kdeconnect.daemon"

A detailed explanation is available on my blog here and also in the code of SnoreToast backend for KNotifications here.

3. What versions of packages did I just install? What version of KDE Connect did I just build?

At the CraftRoot/ prompt, to see the catalog of installed packages, run this command:

craft --print-installed

The KDE Connect version will be based on the latest git commit in the repository. To see what is the latest release (latest tag) and any commits since the release, run these commands:

cd download/git/extragear/kdeconnect-kde
git tag
git log --tags
echo notice the commit date for the latest tag.
echo release v1.3.5 commit date is "May 19 2019"
echo the following will show all the commits since release v1.3.5
echo (assuming the current year is 2019)
git log --since="May 19"

4. I am unable to package KDE Connect for Windows. How to fix this?

At the CraftRoot/ prompt, run these commands to update all the packages:

craft --unmerge kde/frameworks; craft knotifications
craft --update 
craft --package kdeconnect-kde

5. How can I contact the KDE Connect team? I'd like to talk to the team about an issue/ suggestion.

• Telegram: You can find a link to our Telegram group here.
• IRC on Freenode: #kdeconnect
• Mailing List: https://mail.kde.org/mailman/listinfo/kdeconnect
• email ID: [email protected]

Be sure to tell us if you got stuck somewhere in the process of setting up the developer environment. You can mail us. Yes we read the mails!