GSoC/2020/Ideas

Konqi is giving a lesson!

See also: GSoC Instructions, Last year ideas

Guidelines

Information for Students

These ideas were contributed by our developers and users. They are sometimes vague or incomplete. If you wish to submit a proposal based on these ideas, you are urged to contact the developers and find out more about the particular suggestion you're looking at.

Becoming accepted as a Google Summer of Code student is quite competitive. Accepted students typically have thoroughly researched the technologies of their proposed project and have been in frequent contact with potential mentors. Simply copying and pasting an idea here will not work. On the other hand, creating a completely new idea without first consulting potential mentors rarely works.

When writing your proposal or asking for help from the general KDE community don't assume people are familiar with the ideas here. KDE is really big!

If there is no specific contact given you can ask questions on the general KDE development list [email protected]. See the KDE mailing lists page for information on available mailing lists and how to subscribe.

Note

These are all proposals! We are open to new ideas you might have!! Do you have an awesome idea you want to work on with KDE but that is not among the ideas below? That's cool. We love that! But please do us a favor: Get in touch with a mentor early on and make sure your project is realistic and within the scope of KDE.

Adding a Proposal

Note

Follow the template of other proposals!

Project:

If appropriate, screenshot or another image

Brief explanation:

Expected results:

Knowledge Prerequisite:

Mentor:

When adding an idea to this section, please try to include the following data:

• if the application is not widely known, a description of what it does and where its code lives
• a brief explanation
• the expected results
• pre-requisites for working on your project
• if applicable, links to more information or discussions
• mailing list or IRC channel for your application/library/module
• your name and email address for contact (if you're willing to be a mentor)

• • Ideas with no mentors listed and their contact info will be removed **

If you are not a developer but have a good idea for a proposal, get in contact with relevant developers first.

Ideas

Your Own Idea

Project: Something that you're totally excited about

Brief explanation: Do you have an awesome idea you want to work on with KDE but that is not among the ideas below? That's cool. We love that! But please do us a favor: Get in touch with a mentor early on and make sure your project is realistic and within the scope of KDE. That will spare you and us a lot of frustration.

Expected results: Something you and KDE loves

Knowledge Prerequisite: Probably C++ and Qt but depends on your project

Mentor: Try to see who in KDE is interested in what you want to work on and approach them. If you are unsure you can always ask in #kde-soc on Freenode IRC.

Krita

Krita: digital painting for artists. It supports creating images from scratch from beginning to end. Krita is a complex application and developers need to have a fair amount of experience in order to be able to do something.

For this year, projects that the Krita team would be interested in include the following ideas.

Note that we're always open to ideas you bring in yourself: if you're passionate about something you've come up with yourself, that you want for Krita, that's a big plus for us.

We also expect prospective students to submit at least three patches for bugs or wishes or small features. We want to know how good you are! See https://phabricator.kde.org/T7724 for some smaller tasks that you could work on that are not bugs.

Talk to the team in IRC (freenode): #krita or via the mail list: https://mail.kde.org/mailman/listinfo/kimageshop

Project: Integrating the MyPaint Brush Engine

Brief Explanation: The MyPaint brush engine has been separated from the MyPaint application and has been completely rewritten. Artists still like the mypaint brush engine a lot and it would be great to have the engine integrated in Krita as a new brush engine. Libmypaint can be found here: https://github.com/mypaint/libmypaint and the brush set here: https://github.com/mypaint/mypaint-brushes . The first goal is to integreate libmypaint in a Krita brushengine and make it load the brushes. The second goal is to expose the MyPaint brush options in Krita's brush editor and allow the modification and creation of MyPaint brushes in Krita. GIMP is an example of an application that has already integrated the MyPaint brush engine.

Expected Results:

Artists should be able to effectively paint with MyPaint brushes in Krita.

Knowledge Prerequisite:

• C, C++, Qt, Krita

Mentor: Boudewijn Rempt

Project: Supporting Vertical Text and SVG2 Text in the Text Shape

Brief Explanation: Krita's Text Shape was rewritten for Krita 4.0. It is now SVG based, instead of ODF. There are many things lacking, though. The original goal was to support SVG2. Currently the text shape only supports SVG1. There is no automatic wordwrap and vertical text (e.g. Chinese and Japanese) is not supported either. The goal of this project is to support wordwrap and vertical text layout. Other improvements to the text shape can be proposed as well. The level of this project is advanced.

Expected Results:

Artists should be able to create and edit vertical text. Text shapes should be able to automatically wrap text to the bounding box.

Knowledge Prerequisite:

• C, C++, Qt, Krita, SVG, Typography, Text Layout

Level Advanced

Mentor: Boudewijn Rempt

Project: Add New Fill Layer Types

Brief Explanation: Fill layers are layers that automatically generate content. Krita currently has two types of fill layers: Color and Pattern. There used to be another type that generated content dynamically using the OpenShiva scripting language. However, that language hasn't been maintained for a long time. The goal of this project is to add a new dynamic fill layer types that could fill an area with different effects such as perlin and other types of noise, clouds, hatching, fractals.

Expected Results:

Several new fill layer types that allow the user to add dynamically generated content as a layer in the layer stack

Knowledge Prerequisite:

• C, C++, Qt, Krita

Level Medium

Mentor: Boudewijn Rempt

Project: Improve Krita for Touch Systems

Brief Explanation: Krita Gemini/Krita Sketch were version of Krita based on QtQuick 1 that provided a decent touch-only experience. Because of the technical limitations of QtQuick 2, the approach used in Gemini and Sketch is no longer viable. Since Krita 4, there is a QtQuick2 based touch docker that mimics the button bar found on some wacom devices. This is not configurable, and quite limited. This project involves working with Krita's UX designers and users to define a new approach to supporting touch devices, then implementing that support.

Expected Results:

Artists should be able to work with Krita on a touch-only device such as a Surface Pro or Wacom Mobile Studio without wanting to chop their devices in two.

Knowledge Prerequisite:

• C, C++, Qt, Krita

Level Medium

Mentor: Boudewijn Rempt

Project: SVG Mesh Gradients

Brief Explanation: Even though Mesh Gradients are not officially part of the truncated SVG2 specification anymore, having a second implementation next to Inkscape would help improving the standard. Plus, mesh gradients are very useful for artists. This project entails implementing a new gradient type. Whether this should be based on QGradient or not is up for discussion. The gradients should render exactly the same as in inkscape. See https://svgwg.org/svg-next/pservers.html#MeshGradientElement.

Expected Results:

A new gradient type, UI to create and edit these gradients and apply them. Gradients should work both on vector objects as well as on paint layers.

Knowledge Prerequisite:

• C, C++, Qt, Krita, SVG, Inkscape

Level Advanced

Mentor: Boudewijn Rempt

Project: Extending Animation Support for curves

Brief Explanation: In Krita, you can already add curves that could be applied to some properties of a layer, like opacity, animating those properties. We want the animation support extended by allowing users to place masks (filter masks, transformation masks, transparency masks) on the timeline and animate their properties using curves. Every property of a layer or mask placed on the timeline should be animatable.

Expected results:

• Implementation of a gui for applying the curve settings to one or more properties of a mask or layer
• Implementation of the actual rendering of the properties in the frames
• Saving of these settings

Knowledge Prerequisite:

• C++ and Qt

Level Advanced

Mentor: Jouni Pentikainen

Project: Adding support for high-channel depth brush tips

Brief Explanation: Currently, brush tips are 8 bits and based on QImage objects. With the advent of 16 bit/channel and 32 bit/channel support in QImage, we can start supporting higher bit depth brush tips. The 16 bit/channel GBR format from Cinepaint is not so relevant: we should support EXR and PNG for predefined brush tips and extend the autogenerated brush tips to support higher channel depths as well.

Expected results:

• A gui to select the channel depth when creating brush tips
• Loading of high-channel depth brush tips
• Support for high-channel depth brush tips when painting

Knowledge Prerequisite:

• C++ and Qt

Level Advanced

Mentor: Jouni Pentikainen

Project: Extend Arrange Docker to support alignment and distribution of Layers

Brief Explanation: Currently, the arrange docker only supports aligning and distributing vector objects of a singlet vector layer. This project aims to extend the arrange docker support for Layers too.

Expected results:

• All the current operations available in Arrange docker could be done with the layers.

Knowledge Prerequisite:

• C++ and Qt

Level Easy

Mentor: TBD

Project: "Enter Group" and "Vector Pattern" GUI functionality for Krita vectors

Brief Explanation: Currently, to modify grouped shapes the user have to always ungroup them. The goal of the project is to implement a UIX for modify the shapes inside group without ungrouping them (see Inkscape). The user should be able to "enter" group, which would limit his actions only to the shapes inside a selected group (perhaps, shapes outside the group should also be grayed-out?). The feature is tightly related to "SVG Vector Patterns" functionality. Krita can already render vector patterns perfectly fine, but there is no GUI for creating/modifying them. Enter Group functionality should be reused for pattern editing.

Expected results:

• The user can Enter/Leave group and modify shapes inside it without ungrouping
• Shapes outside the currently entered group are grayed-out (disputable?)
• The user can create/modify vector patterns using Tool Options docker of DefaultTool (see KoFillConfigWidget)

Knowledge Prerequisite:

• C++ and Qt

Level Medium

Mentor: Dmitry Kazakov

Project: Improve texture editing pipeline and add DDS file format

Brief Explanation: It would be nice to have support for DDS textures file format, which is rather popular among game developers. There are also a lot of nice small features which could improve texture creator's workflow a lot: https://phabricator.kde.org/T12767

Expected results:

• Krita can load and save DDS textures
• Mipmap generation GUI
• cubemaps, 3D-textures, texture arrays editing GUI (use animation timeline for that?)

Knowledge Prerequisite:

• C++ and Qt

Level Easy to Medium (depending on the amount of features the student plans to implement)

Mentor: TBD

digiKam

digiKam is an advanced open-source digital photo management application that runs on Linux, Windows, and MacOS. The application provides a comprehensive set of tools for importing, managing, editing, and sharing photos and raw files.

• digiKam project web site
• Mailinglist
• LinkedIn Group
• #digikam IRC channel on Freenode
• #dk-gsoc20-facesengine channel on Riot kde webchat

Project: DNN based Faces Recognition Improvements

Brief Explanation: During GSoC 2019, we have proposed a project to implement an AI extension to the digiKam core face recognition. The project has used the C++ OpenCV Deep Learning Module to detect and recognize faces with success. Certainly, there are still many places in the recognition mechanism to be improved, in order to obtain more accurate results while avoiding "re-recognization" on the same faces, especially when more than one face are detected in the same photo. In addition, clustering analysis on unknown faces should be studied more carefully during this project, as it may be interestingly useful to improve the UX of digiKam face engine.

In parallel, Faces Detection and Recognition codes from digiKam core should be restructured into plugin architecture, so as to facilitate future contribution on extending this feature to other kinds of detection and recognition (e.g. detect and recognize animals, monuments, plants, etc.)

Expected Results:

• Improve face recognition accuracy, implement plugin architecture.
• Study face clustering.
• Improve testing for NN models. Implement unit tests, and code documentations.

Knowledge Prerequisite:

• C++, Qt, OpenCV,
• Python, Tensorflow
• ML/DL, Neural Network

Level Advanced

Mentors: Maik Qualmann ([email protected]), Thanh Trung Dinh ([email protected]), and Gilles Caulier ([email protected])

Contact: If you have any question about the project, please post it on Riot (Matrix) room for this facesengine project or mailing list. However, DO NOT discussing your ideas for the proposal there.

Project: Faces Management workflow improvements

Brief Explanation: digiKam provide a Faces detection algorithm which work mostly in 80% of use cases. It detect faces position in image automatically and register these information in database. Event if a lots of tasks can be done in background by digiKam, the end-users needs to adjust, re-organize, rename, delete Face tags in database through the user interface.

Since many year, a lots of improvements have been identified by digiKam users community to improve the face tags management workflow in graphical use interface. See this list of bugzilla entries for details

Note: Face Recognition is another part of Faces management, but this project is concerned by algorithms used while recognition.

Expected Results:

Provide a better Face Tags management workflow in user interface, with unit test, and documentation.

Knowledge Prerequisite:

• C, C++, Qt, User interface, digiKam

Mentors: Maik Qualmann ([email protected]) and Gilles Caulier ([email protected])

Project: Factoring all Export Tools with new Export API and port to QtNetworkAuth

Brief Explanation: With GoSC 2018, we proposed a project to implement a huge factorization and improvements with all digiKam export to web service plugins. Our student fixed plenty of code using OAuth version 2 authentification through libo2 library, has simplified classes, and started to write a new API to factorize all these tools, including a common Wizard dialog. Even if the export tools implementation are now better, they do not use the new API and always run as a stand alone session in digiKam core. Due to this fact, the Web Service tools are not yet usable in digiKam Batch Queue Manager as single step runnable at end of a queue processing. So the section of code about factored export tools API is currently disabled in digiKam core. This year, the project will be to fix that and to migrate libo2 dependency to the new QtNetworkAuth framewwork.

Expected Results:

Start to use every the new export tools API, use the new Wizard dialog, factoring codes everywhere, port to QtNetworkAuth, and introduce all export tools to BQM. Write unit tests, and documentation.

Knowledge Prerequisite:

• C++, Qt, Oauth2

Mentors: Mohamed Anwer ([email protected]), Maik Qualmann ([email protected]) and Gilles Caulier ([email protected])

Kirogi

A Ground Control Station (GSC) application for drones with a modern mindset and codebase philosophy, the project is one of the newest one under KDE organization and we would like your help to make it the best open source GCS around!

We are also open for new ideas, be free to send your own plan for Kirogi.

For more information, take a look in our website: https://kirogi.org/

Be in touch with:

• IRC (freenode): #kde-kirogi
• Telegram: @kde_kirogi
• Matrix: #kde-kirogi:kde.org

Project: Improve MAVLink integration

Brief Explanation: MAVLink is one of the most popular communication protocols between ground control stations, quadcopters, planes, submarines and others vehicles. Kirogi has an initial integration of MAVLink, but some features are still missing, including: Link configuration, parameter configuration, flight modes and others.

Expected Results:

• Allow MAVLink connection via serial connection and TCP
• Support and identify different vehicles
• Control and change flight modes

Knowledge Prerequisite:

• C++, QML, JS, CMake

Mentors: Patrick José Pereira ([email protected])

Co-mentor: Eike Hein ([email protected])

Project: Mission planner widget

Brief Explanation: An unmanned vehicle needs mission plans to do his job. To allow end-users to create them, Kirogi needs an intuitive graphical user interface to set waypoints, camera control along the flight path and configure survey patterns. This user interface then needs to make the user-created mission plan data available for further processing by the vehicle- or protocol-specific backends.

Expected Results:

• A friendly user interface to allow users to plan missions for unmanned vehicles
• A good abstract interface to provide mission information from the GUI to the vehicle backend plugins

Knowledge Prerequisite:

• C++, QML, JS, CMake

Mentors: Patrick José Pereira ([email protected])

Co-mentor: Eike Hein ([email protected])

Okular

Okular is a universal document viewer developed by KDE. Okular works on multiple platforms, including but not limited to Linux, Windows, Mac OS X, *BSD. Contact the Okular developers.

Project: Improve custom stamp annotation handling

Brief explanation: Okular does display stamp annotations, but the support is somewhat incomplete. This particularly shows when trying to use stamp annotations with a custom image. For example, such annotations can be added in Okular, but they cannot be saved to the pdf file in a way that any other pdf viewer can read. Also, they will not appear on print-outs.

The underlying reason for this is that Okular renders these stamps itself, rather than relying on the poppler library, which does all other pdf rendering. Goal of this project is therefore to teach poppler how to render stamp annotations, and then make Okular use that new functionality. More details can be found in the bug report [0].

[0] https://bugs.kde.org/show_bug.cgi?id=383651

Expected results: Poppler should render stamp annotations. Annotations should be printable from Okular. Custom stamps inserted via the Okular GUI should be visible in other pdf readers.

Knowledge prerequisite: C++, and a bit about the pdf format.

Mentor: Albert Astals Cid [email protected]

Project: Improve handling of non latin1 characters in annotations

Brief explanation: Okular let's users add annotations but using non latin1 characters does not really work.

The underlying reason for this is that poppler library, the library that Okular uses for pdf handling is lacking support for that. Goal of this project is therefore to teach poppler how to handle annotations with non latin1 text properly. More details can be found in the bug report [0].

[0] https://gitlab.freedesktop.org/poppler/poppler/issues/362

Expected results: Poppler should render non latin1 characters.

Knowledge prerequisite: C++, and a bit about the pdf format.

Mentor: Albert Astals Cid [email protected]

KtoBlzCheck

KtoBLZCheck is a library for checking account numbers and bank codes of German banks. The basic data used by the library is also used by other applications for the administration of finances such as KMyMoney and AqBanking.

Project: Provide the bank data needed for financial applications in SQLite format

Brief Explanation: To avoid duplicate data and to support multiple countries, the query and generation of SQLite databases will be integrated into ktoblzcheck.

Expected Results: The data format (text file) used so far should be replaced by SQLite databases and the available command line tools should be changed to use the SQLite databases. Furthermore an API for querying the SQLite databases is required to integrate these databases into other applications. For example, for KDE application support for KServiceTypeTrader::query() is required.

Knowledge requirement: C++, technical english speaking and writing

Level: intermediate level

Mentor: contact kde-finance-apps mailing list

KStars

KStars is free, open source, cross-platform Astronomy Software. It provides an accurate graphical simulation of the night sky, from any location on Earth, at any date and time.

Project: Deep Sky Object Overhaul

Brief explanation: KStars supports many deep sky objects (DSOs) including galaxies, nebulae, supernovae, clusters and more. Currently, some deep sky catalogs are stored in simple space separated text format where they are parsed into KStars directly or into KStars Deep Sky Component SQLite3 database which is then loaded in KStars. However, since all DSOs are loaded at once into memory, this limits the size of catalogs within KStars. A solution similar to how dynamic stars are cached in and out of memory must be developed for DSOs. Furthermore, all catalog entries should have their trixels indexed so that they can be efficiently drawn unto the sky map. Another issue is that catalogs can overlap since there is no cross-identification of various catalogs. For example, Andromeda galaxy exists in Messier catalog as M31, and exists in NGC catalog as NGC 224. The database should support an ability to cross-identify objects from all supported and future catalogs.

Expected results:

• Convert all text-format catalogs to SQLite3 database.
• Develop master DSO database where cross-identification of objects is supported. Master database can support addon downloadable catalogs where they can be merged once downloaded by the user.
• Import of The Principal Galaxy Catalog, 2003 Version (PGC2003) which contains ~1 million galaxies into KStars as a downloadable addon.
• Caching and drawing optimizations for large catalogs.
• Cross-identification for all supported DSO catalogs including, but not limited too: NGC/IC/Messier/Arp/PGC/LDN
• Trixel indexation for all DSOs. Implementation of improved drawing cached routine in KStars for DSOs similar to stars.
• All necessary updates within KStars maps, tools and dialogs to reflect the above changes.

Knowledge Prerequisite: C++, Qt, Data Structures

Mentor: Jasem Mutlaq (Matrix: Jasem)

Project: FITSViewer & Photometry Improvements

Brief explanation: The FITSViewer is used to display FITS images as captured by cameras or opened by the user. It supports 8, 16, 32, and 64bit formats with either a single channel (Mono or Bayer) or RGB cube. The goal for this project is to provide efficient and intuitive controls for:

1. Noise Calculation: Calculate the overall Signal-to-Noise (SNR) radio for the overall image, or a specific subframe of the image.
2. Sky Glow Computation: Estimation of Sky Glow component in image of various exposures. Each captured image is affected by multiple sources of noise, only of which is the sky glow which in turn is affected by the atmosphere, pollution, and artificial sources (e.g. light). The objective is to propose to the user the optimum exposure time given the sky glow contribution to the image.
3. Mask Overlay: Ability to select custom mask over stars to aid in focusing and photometry.
4. Photometry: KStars includes SEP which can be used to extract sources from stellar images and also performs aperture photometry. A new tool should be developed to aid the users to perform photometric work with the images including reduction of images (darks & flats) with various optimization/algorithmic settings. Additionally, the tool provides means for aperture photometry calculations as well.

Since FITSViews typically deals with very high-resolution images, such calculations can be very computationally expensive. It is expected that a very efficient multi-threaded code to be developed to take advantage of all the available cores on the system and any hardware or instruction set optimizations to achieve the smoothest user experience. Expected results:

• Improved Histogram Tool.
• SNR, Sky Glow, and Photometry calculations.
• Photometric reductions. Aperture photometry.

Knowledge Prerequisite: C++, Qt, Threading, Data Structures

Mentor: Jasem Mutlaq (Matrix: Jasem)

Project: Implement Qt3D backend for KStars

Brief explanation: The Skymap in KStars desktop version is currently built using QPainter and 2D drawing primitives. In order to take advantage of advances in modern GPU hardware and to present a stunning visual view of the night sky, a 3D backend is desired. Qt 3D provides functionality for near-realtime simulation systems with support for 2D and 3D rendering in both Qt C++ and Qt Quick applications. Within KStars, SkyPainter provides a backend-agnostic class for drawing object unto the skymap regardless of the backend. Previously, an experimental OpenGL backend was developed but was later deprecated due to drawing issues. Since Qt3D provides an abstraction to the backend framework (OpenGL/Vulkan/DirectX), it presents a very flexible framework for building future-proof 3D applications.

Expected results:

• Create Qt3D based backend to draw all objects currently implemented by QPainter backend.
• Create realistic colors, shares, textures, meshes, lighting for all stars, solar system, and deep sky objects.
• Create animations for meteor shows, comet tails, stars twinkle..etc

Knowledge Prerequisite: C++, Qt, Prior experience working with 3D applications/games.

Mentor: Jasem Mutlaq (Matrix: Jasem)

Project: KStars Testing

Brief explanation: KStars is built on a relatively large number of C++ classes, grouped in the following categories: sky objects and components, projection algorithms, graphics, timekeeping, widgets, Ekos automation, INDI client, FITS viewing, accessories and several library interfaces. Most of these constituting classes remain untested in terms of systematic and automatic verification. The objective of this project is to verify the code written in those classes at three levels: API, functionality and UI-based use case. In order to achieve this, the existing test code will have to extend its code coverage, report validation results and integrate seamlessly to the build recipe of the project.

The difficulty of this project is the requirement to create tests on legacy code and consolidate a test plan that reflects how the software is working instead of how we expect it to work.

Expected results:

• Verify APIs: call each public class member using arbitrary test fixtures, control side effects by stubbing interfaces. This verifies code is executing in the data domain we expect, or fails for known reasons. As an example, the report will reveal how classes managing coordinates accept or reject numerical input.
• Verify functionalities: ensure specific class interfaces return an expected result given a controlled set of input parameters. This verifies code is behaving as expected, or isolates known issues. As an example, the report will reveal which value of the Julian time classes managing timekeeping produce given different input objects embedding the same UTC time.
• Verify use cases: ensure specific scenarios can be executed in the interface as presented in their documentation. This verifies procedures achieving useful results for the end-user remain stable, and controls how they evolve and improve during development.
• Consolidate test reports and code coverage, and automate the execution of the test plan when building.

Bonus: generate videos of use cases for end-users automatically.

Level: beginner to intermediate

Knowledge prerequisites: C++, Qt, software testing and verification fundamentals

Mentor: Jasem Mutlaq (Matrix: Jasem)

Project: Support of virtual reality

Short explanation: KStars should support virtual reality devices

Brief Explanation: Valve announced the release of their VR flagship https://twitter.com/valvesoftware/status/1196566870360387584, which is likely to increase the acceptance of VR devices and is a good opportunity to follow this trend. KStars with virtual reality support could be published like Krita in the Steam Shop and thus gain a wider distribution.

Expected Results: A version of KStars that can be used with an HTC Vive or other software-compatible openvr base virtual reality device [1]. This includes support for spatial representation, an extension for stereoscopic representation, the connection of rendering with openvr and the connection of virtual reality controllers for interaction and navigation in the spatial scene, which could be based on the openvr viewer for OSG.

Knowledge requirement: C++, openGL, 3D programming, KStars, openvr, technical english speaking and writing

Requirement:

• Project: Spatial representation
• Project: Stereoscopic display for KStars
• Project: Connect stereoscopic rendering to VR api
• Project: Adding Virtual Reality Controller support to KStars
• Access to a virtual reality device supported by openvr api like HTC Vive (sponsers wanted)

Level: intermediate level

Mentor: in progress (contact Contact)

Project: Spatial representation for KStars

Short explanation: KStars currently uses a 2D drawing interface to display graphical objects. In preparation for virtual reality support, an extension is required to display a spatial scene.

Brief explanation: It should be possible to extend the SkyGLPainter class to use the corresponding functions of the 3D api instead of the 2D OpenGL api.

Expected Results: A version of KStars that uses a spatial scene for rendering.

Knowledge requirement: C++, openGL, 3D programming, KStars

Notes: This project is optional, because you can probably mount the current 2D scene for VR glasses on a sphere.

Level: intermediate level

Mentor: in progress (contact Contact)

Project: Stereoscope display for KStars

Short explanation: Virtual reality support requires the representation of the scene for each eye, which must be added to KStars

Brief explanation: In an implementation an additional instance for the second eye and the control of this second view would have to be added to the existing SkyMapGLDraw instance. Via a menu item in the settings menu the activation of this view form should be added and the documentation should be adapted accordingly.

Expected results: A version of KStars that supports stereoscopic viewing

Knowledge requirement: C++, openGL, 3D programming, KStars

Level: intermediate level

Mentor: in progress (contact Contact)

Project: Connect stereoscopic rendering to VR api to KStars

Short explanation: To support a virtual reality device based on the openvr api, the rendering must be connected to the openvr api.

Expected results: A version of KStars that allows rendering to a display on an HTC Vive or similar. device.

Knowledge requirement: C++, openGL, 3D programming, KStars

Notes: The submission of images to openvr depends on DirectX, OpenGL, Metal and/or Vulkan. With the port to KF5, the OpenGL backend of kstars has been removed and must be added again [2]

Requirement: Access to a virtual reality device supported by openvr api like HTC Vive or Valve Index

Level: intermediate level

Mentor: in progress (contact Contact)

Project: Adding Virtual Reality Controller support to KStars

Short explanation: For interaction with the application and navigation in the spatial scene, support for the use of virtual reality controllers is required.

Expected Results: A version of KStars that supports navigation in the spatial scene by using a virtual reality device.

Knowledge requirement: C++, openGL, 3D programming, KStars

Requirement: Access to a virtual reality device supported by openvr api like HTC Vive

Level: intermediate level

Mentor: in progress (contact Contact)

KDE Connect

KDE Connect is a project that enables all your devices to communicate with each other.

IRC/Matrix: #kdeconnect

Mailing list: https://mail.kde.org/mailman/listinfo/kdeconnect

Or chat with us on Telegram

Project: Improve MMS support to the SMS client

KDE Connect recently released a SMS Messaging app. It is capable of basic synchronization of messages including sending and receiving of SMS. However, it is very limited with MMS and can only support showing text (no pictures, sound, or video) and cannot reply to multi-target conversations.

At the end of this project, the Messaging app should be able to:

• Send simple, plain-text MMS
• Send multi-target MMS
• View received pictures in the desktop app
• Send pictures in the desktop app
• View/Send other media (videos and audio)
• Download other attachments (.pdf, .txt, etc.)
• Start a new conversation (Currently it is only possible to reply to existing conversations)

Challenges:

The current implementation of sending SMS on the Android side would need to be completely re-worked, which will likely dive deeper than expected into Android's SDK. However, it should require only a small amount of work to support reading pictures and other attachments. Support for sending new kinds of text from the desktop is trivial, and support for viewing pictures should be relatively easy to accomplish by using the share plugin plus Qt5/QML's excellent multimedia support.

Level: Variable

An advanced student might be able to tackle all the goals in one summer, but I would be happy to have a student on board who is newer and only aims for a few. Just bring your enthusiasm!

Areas of knowledge: C++, Qt5, and QML on the Desktop side, Java on the Android side

Mentor: Simon Redman

Project: Modernize the clipboard plugin

KDE Connect's clipboard plugin allows seamless sharing of text between paired devices. However, with Android 10 it faces a problem because apps can no longer read and write the clipboard.

The goal of this project is to devise some workaround to allow the clipboard plugin to work on Android 10. We are having a discussion here which brings up some ideas. You are free to implement those, or add your own!

In addition to making the clipboard plugin work on Android, it would be excellent to add the ability to synchronize pictures and other non-text "objects". For the desktop-to-desktop use-case, this makes perfect sense for being able to copy-paste images, files, etc. from one computer to another. The desktop-to-mobile usecase is also desired since it would allow quick sharing of screenshots, etc. to the variety of communication apps available on the phone. However, the implementation is less straightforward since it would require understanding how the Android clipboard handles non-text (if it even does), or thinking of some workaround (like having a button in the notification to share the currently-copied object)

Level: Intermediate

Areas of knowledge: Primarily Java and knowledge of Android SDKs. Some C++ and Qt for the desktop.

Mentor: Simon Redman

Project: KDE Connect bluetooth backend

KDE Connect works using a LAN/WLAN connection, but this isn't available everywhere. Examples are offices, schools, university or in public transport. Thus, KDE Connect has an alternative bluetooth backend, but it still needs a lot of work.

The goal of this project is to make the bluetooth backend of KDE Connect production-ready. Examples include:

• Reliably discover and connect to other KDE Connect devices
• Make pairing devices in KDE Connect work over bluetooth
• Find a solution for file-browsing over bluetooth
• Investigate multi-device connectivity
• Lots of bluetooth debugging

By the end of the project, we should have a fully-working bluetooth backend, good enough to release to all users.

Areas of knowledge: Experience in C++, Qt5 and Java development is required. Knowledge of Android development is preferred.

Mentor: Piyush Aggarwal | Matthijs Tijnk | Philip C-C

Feel free to reach out to the rest of the team on the kdeconnect mailing list, Telegram, or on #kdeconnect on Freenode

Project: Share remote device's network status

Like the battery plugin, it would be nice to see the currently connected device's network status and strength of the remote device.

As a first solution, this could just be shown in the devices list next to the battery status. For an advanced solution, this could be piped in some way to the Network Manager applet when using the tethering capabilities of the remote device to give Internet access to a desktop, so that the actual strength of the network connection can be seen in the desktop's task bar.

Phabricator Task

Level: Beginner (Advanced for Network Manager integration)

Areas of knowledge: Primarily Java and knowledge of Android SDKs for gethering the network information and some C++ and Qt for the desktop implementation

Mentor: Simon Redman

Project: Linux port of an openVR driver for navigating in a SteamVR environment

Long Explanation: For the development of virtual reality applications with SteamVR, a real Head Mounted Display (HMD) is not always required, often a corresponding display on the screen and rudimentary control options are sufficient. SteamVR provides a so-called "null" driver [3] for the display, which emulates the availability of a Head Mounted Display (HMD). What is missing in this driver is an easy way to navigate the scene, e.g. moving the HMD or the hand controls and their buttons. On [4] this has already been realized for Windows, what is still missing is a port to Linux. The biggest challenge when using Qt or SDL is to get the keyboard input for the current VR application to process it. Under Windows, a system API function is therefore used, which is probably also required under Linux.

Requirements: SteamVR account and SteamVR installation

Knowledge requirement: C++, ???

Level: Intermediate

Mentor: Contact

Akonadi

The Akonadi framework is responsible for providing applications with a centralized database to store, index and retrieve the user's personal information. This includes the user's emails, contacts, calendars, events, journals, alarms, notes, etc.

Project: EteSync sync backend for Akonadi

Brief explanation: EteSync is a secure, end-to-end encrypted and FLOSS sync solution for your contacts, calendars and tasks. There are are clients for Android, iOS, the desktop (Cal/CardDAV bridge) and the web, and a Thunderbird plugin is in the works. The idea is to implement a KDE PIM backend to enable KDE users to use EteSync to easily end-to-end encrypt and sync their contacts, calendars and tasks.

Expected results: KDE users will be able to end-to-end encrypt and sync their PIM information using the EteSync protocol.

Knowledge Prerequisite: C++ and basic familiarity with Qt

Level: Medium

Mentor: Daniel Vrátil (dvratil on IRC) for the Akonadi part and Tom Hacohen (TAsn on IRC, [email protected] by email) for EteSync

Communication: IRC (freenode) #akonadi

GCompris

Multiple dataset

Project type: Coding

Brief explanation: GCompris is a high quality educational software suite, including a large number of activities for children aged 2 to 10. We recently introduced a multiple level selection. This allows user to choose more closely the competences they want to work on. For example when working on numeration, user can now choose if he wants to learn numbers from 0 to 3 or 0 to 4 or 0 to 5 etc... Contact the GCompris team.

Expected results: The aim of this year is to complete the number of activities including this features. Targeted activities are listed under the following address:

https://phabricator.kde.org/T12428

The work in progress can be found in our git repository under multiple_dataset branch. Some activities already ported are smallnumber, smallnumbers2, gletters, reversecount, gletters.

Knowledge Prerequisite:

Be interested in children’s education

Be familiar with GCompris concept and content

Basic knowledge in a programming language (a 1 year school course is enough)

Be able to build the Qt Quick version of GCompris

Application guide: Provide a timeline in your application. If you haven't contributed yet please read http://gcompris.net/wiki/GSOC_newcomers, http://gcompris.net/wiki/An_exercise_for_new_contributors and http://gcompris.net/wiki/Reviewing_an_activity

There are several info in the wiki: http://gcompris.net/wiki/Developer%27s_corner.

Feel free to contact us either on irc or by mail ([email protected])

Mentors: Aman Kumar Gupta (IRC: gupta2140), Emmanuel Charruau (IRC: allon), Johnny Jazeix (IRC: JohnnyJ), Timothée Giet (IRC: Animtim)

Falkon

Falkon is a KDE web browser using QtWebEngine rendering engine, previously known as QupZilla. It aims to be a lightweight web browser available through all major platforms. This project has been originally started only for educational purposes. But from its start, Falkon has grown into a feature-rich browser.

Contact the Falkon team

Project: Firefox Sync

Brief explanation: Firefox Sync is an open API for synchronization of browser data between multiple instances. Falkon doesn't currently have support for any synchronization at all. Instead of creating in-house solution, it would be best to use some existing solution, which Firefox Sync appears to be a great candidate.

Firefox Sync is not exclusive to Firefox browser, it was already implemented for example in Gnome Epiphany browser (https://github.com/GNOME/epiphany/tree/master/lib/sync).

Expected results: Falkon is able to synchronize bookmarks, tabs, passwords, history... over Firefox sync API.

Knowledge Prerequisite: C++, Qt

Mentor: Juraj Oravec ([email protected], IRC: SGOrava on #falkon)

Cantor

Cantor provides a graphical frontend for different open source computer algebra systems and scientific programming languages. Contact the KDE-Edu team.

Subscribe to KDE-Edu mail list

Project: Integrated documentation

Brief explanation: at the moment the external documentation like for example for Maxima http://maxima.sourceforge.net/docs/manual/en/maxima.html, and similar for Octave, python, etc., is opened in the external browser window. Ideally, we'd show this inside of the application in the help/documentation panel and enable a quick access to the documentation together with some more advanced search capabilities. Integrated search and also the context sensitive help (user marks a keyword in the worksheet, hits e.g. the F1 button and the documentation for the selected keyword is shown) should be possible. Qt Help Framework (http://doc.qt.io/qt-5/qthelp-framework.html) should be utilized for this. For indexing and searching in a unified manner the documentation together with the search index should be available locally. Qt help's qch file should be available for download on store.kde.org. Users of different systems (Maxima, Octave, R, etc.) would download the documentation they need. Ideally, we could also try to get a similar appearance by css-styling the html files for different systems prior to creating those qch files.

The project consists of the following three major parts:

• implementation in c++ (documentation panel, searching, short cuts for faster navigation, etc.)
• creation of Qt help files for major computer algebra systems and programming languages supported by Cantor
• definition of sections on store.kde.org

Expected results: integrated documentation in Cantor for the supported CAS and programming languages

Knowledge Prerequisite: C++, Qt, basic knowledge about html

Mentor: Alexander Semke

Uyuni (part of the openSUSE Organization in GSoC)

Project: Add KDE support to Uyuni

Introduction: This is a shared project between KDE and the openSUSE Organization in Google Summer of Code. It will take an openSUSE slot, not a KDE slot. Contact pgquiles in case of doubt.

Brief explanation: Uyuni is a systems management, configuration management, systems deployment, auditing, etc solution to manage Linux systems (SUSE Linux, Red Hat Linux, Ubuntu, etc). It is the upstream of SUSE Manager.

As of now, Uyuni is mostly used to manage Linux servers but why not use it to manage Linux desktops?

Plasma Desktop provides a number of files that can be tuned and tweaked to configure kiosk mode, background, where the task manager is, what Plasma add-ons are installed, etc.

Expected results: This project is about creating Salt formulas, forms, grains, modules, pillars, etc for a sysadmin to be able to configure KDE desktops, much like a Windows sysadmin would do with Group Policy Objects.

With that, Uyuni should be able to:

• Configure basic desktop parameters such as background color/image, locale, where the task manager is, how many desktops, etc (full list to be determined after examining the KDE docs; information is a bit scattered and may be out of date)
• Install/remove Plasma add-ons and configure them
• Configure kiosk mode parameters full list to be determined after examining the KDE docs; information is a bit scattered and may be out of date) - https://userbase.kde.org/KDE_System_Administration/Kiosk/Introduction

Knowledge Prerequisite: You will need to have a good understanding of Linux, and be comfortable with version control using git and GitHub. Python and YAML. Salt (or alike: Chef, Ansible, etc) knowledge will be a plus. Being able to read C++, Qt and KDE code will help in case the documentation is out of date and reading code is the only way to find some configuration parameter.

Mentor: this project will be co-mentored by Uyuni and KDE:

• Uyuni side: Pau Garcia Quiles (IRC: pgquiles at #uyuni, paususe at Gitter) and Benedikt Werner
• KDE: David Edmundson / Fabian Vogt

More details: take a look (and ask questions) at the GitHub issue in openSUSE/Uyuni, and how to join the Uyuni community: https://github.com/openSUSE/mentoring/issues/128 https://www.uyuni-project.org/pages/contact.html https://101.opensuse.org/

Kdenlive

Project: Basic Subtitling Support in Kdenlive

Brief explanation: Integrate basic subtitling support in Kdenlive to allow some light editing of subtitles like creating basic subtitles and adjust timings of existing subtitles. ".srt" files can be displayed through an FFMPEG filter coupled with a simple UI can then be integrated with a separate track for subtitles in Kdenlive.

Expected results: Allow creation of basic subtitles, loading of existing subtitles and allow light editing in Kdenlive.

Knowledge Prerequisite: C++, Qt, basic knowledge of Kdenlive/FFMPEG

Mentor: Akhil K Gangadharan ([email protected] or akhilkg on Freenode. Get in touch with the team at #kdenlive or the developer group in Telegram)