Plasma/Mobile/Flashing: Difference between revisions

From KDE Community Wiki
< Plasma‎ | Mobile
No edit summary
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Warning|This page is obsolete, use [https://www.plasma-mobile.org/neon-arch-reference-rootfs/ plasma-mobile ] web site instructions for flashing}}
= Flashing =
= Flashing =


For an ongoing updated guide, please go here:
For an ongoing updated guide, please follow these instructions:
* https://plasma-mobile.org/nexus-5/
* https://plasma-mobile.org/nexus-5/
Other useful information:
* http://schier.co/post/how-to-root-nexus-5-in-ubuntu-linux




Line 18: Line 18:
On Ubuntu do:
On Ubuntu do:


  sudo apt-get install android-tools* ubuntu-device-flash phablet-tools
  sudo apt-get install android-tools* phablet-tools


Connect the device and type:
Connect the device and type:

Latest revision as of 11:07, 6 July 2018

Warning

This page is obsolete, use plasma-mobile web site instructions for flashing


Flashing

For an ongoing updated guide, please follow these instructions:


Prerequisites

The device must be connected to the Linux host with the USB cable all the time, unless told to reconnect. The device must also be unlocked and prepared to be flashed, see this page for details.

Configure the host device

Install Android tools.

On Ubuntu do:

sudo apt-get install android-tools* phablet-tools

Connect the device and type:

lsusb

an output like this will come out:

Bus 004 Device 010: ID 18d1:4ee1 Google Inc. Nexus 4 / 10

18d1 is the vendor id, 4ee1 is the product id.

Numbers may change with other devices.

Create /etc/udev/rules.d/51-android.rules with:

SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee1", SYMLINK+="android_adb"
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee1", SYMLINK+="android_fastboot"

replace vendor and product identifiers with yours.

Now Reload uev's rules to make these changes effective:

sudo udevadm control --reload-rules

Reconnect your device.

Type:

sudo adb devices

your device will be listed.

Unlock the device

Go to the bootloader:

  • Power off the phone
  • Keep volume down and power pressed together until the bootloader is shown (the bootloader has an android with the lid open like this:

android-az-bootloader.jpg)

From the Linux host type:

sudo fastboot oem unlock

Select "Yes" on the phone using volume keys, confirm pressing the power key once.

Now reboot:

sudo fastboot reboot

Since unlocking wipes data, Android will restart the first time wizard. Let the wizard come up, then press Power button to just power off the phone, you will not need to complete the wizard.

Flashing Plasma Mobile

For an ongoing updated guide for all flashing options, please go here:


Basic Device Setup after flashing is done

After installation, enable ssh:

Make sure the device is connected through your USB port, then log in to it using

sudo adb shell

Optionally you can make this shell have bigger 'inner' size by running

stty rows 40 cols 160

This is not needed but will make the line not break when entering long commands. Adjust the rows and cols according to your screen/settings.

Writable root

By default, the root filesystem is read-only. Not too useful for developers. A script is run on first boot to make it writable and makes a stamp file ```plasma-phone-devel-setup-run```, check this file exists then run

sudo reboot 

and it will boot up with writable root.

The verbose version (so you know what's going on):

sudo touch /userdata/.writable_image
sudo touch /userdata/.adb_onlock
sudo reboot

Resizing the root parition

In order to have enough space available for installing stuff, you should resize the root partition using

sudo resize-root-partition

This resized your root partition to about 6GB

Enable SSH access

After reboot above for writeable root it should then run sshd, it will make the stamp file ```plasma-phone-devel-setup2-run```.

If not run it manually:

sudo ssh-setup

The verbose version (so you know what's going on):

sudo bash
echo manual > /etc/init/ssh.override
echo "exec /usr/sbin/sshd -D -o PasswordAuthentication=yes" >> /etc/init/ssh.override

sudo service ssh start
sudo setprop persist.service.ssh true
sudo reboot

Connect Wifi

We've included a small script which sets up a wifi connection (WPA-PSK) for NetworkManager. This can be run once writeable root is set up (as above).

wifi-setup SSID PASSWORD

If you're using a different security mechanism for your wifi network, it's time to read the nmcli documentation. Look into /usr/bin/wifi-setup for inspiration.

On and on...

Now follow the instructions for your Development Setup to get going.