< Neon Revision as of 16:48, 15 December 2017 (view source)Riddell (talk | contribs) (→Pinebook Images)← Older edit Latest revision as of 14:04, 20 December 2017 (view source) Riddell (talk | contribs) Line 60: Line 60: How this [https://www.fsf.org/campaigns/secure-boot-vs-restricted-boot/whitepaper-web works with GPL 3 terms] is another mystery for future work. How this [https://www.fsf.org/campaigns/secure-boot-vs-restricted-boot/whitepaper-web works with GPL 3 terms] is another mystery for future work. −== Pinebook Images ==+= Pinebook Images = We're also building images for the [https://www.pine64.org/?page_id=3707 Pinebook] cheap ARM-based laptop. We're also building images for the [https://www.pine64.org/?page_id=3707 Pinebook] cheap ARM-based laptop. Latest revision as of 14:04, 20 December 2017 Contents 1 KDE neon live/installable images 1.1 Seeds 1.2 Bits we need to fork and customise 2 UEFI Support 2.1 KDE neon UEFI implementation June 2016 2.2 SecureBoot Support 3 Pinebook Images KDE neon live/installable images Images are at files.kde.org on depot (stores the most recent ones and all from today). Our images are built with build.neon.kde.org using the scripts in pangea-tooling nci/imager imager.rb starts a new containment and runs build.sh and copies the result depot and images.neon.kde.org build.sh is run in the containment and installs the packages needed, sets some variables and runs ubuntu-defaults-image ubuntu-defaults-image is a script copied from ubuntu-defaults-builder, an Ubuntu script intended to make locale specific ubuntu derived images (we ignore the template for meta package and locale stuff). It uses Ubuntu’s fork of Debian’s live-build, it’s quite an old fork (3.0~ from August 2012) with lots of Ubuntu specific patches live-build uses livecd-rootfs, Ubuntu hooks (/usr/share/livecd-rootfs/live-build/ubuntu-core/) to build the squashfs live filesystem Seeds Our meta packages and ISOs are made from Seeds http://weegie.edinburghlinux.co.uk/~jr/neon-seeds/seeds/ Bits we need to fork and customise ubuntu-defaults-image is adapted to read our hooks and ignore the kubuntu-desktop meta package, this can probably be done away with config-hooks/apt.conf.sh adds apt debugging and no language pack settings config-hooks/repo.sh adds neon repo https://code.launchpad.net/~kdeneon/livecd-rootfs-neon/trunk is a branch of lp:livecd-rootfs/trunk it adds code to use our meta packages when PROJECT is set to neon neon:neon/seeds makes the neon-desktop and neon-live metapackages. Kubuntu uses a kubuntu-live apt task but our archive doesn’t support tasks so we use metapackages instead. https://launchpad.net/ubiquity-neon has our branch of ubiquity (branched from xenial tag) with a few changes to remove branding base-files sets important files including lsb-release plymouth theme is now from Plasma breeze-plymouth grub theme is now from Plasma breeze-grub syslinux theme is our own theme, TODO document how this works TODO: sign images UEFI Support live-build does not support UEFI. There's a few patches and addons to do so, see todo item for links. The live-build UEFI bug has patches to add it natively. Netrunner just keeps it from Kubuntu as part of the remaster. Tanglu adds a efi script to live-build which takes it from debian-installer. Ubuntu images get their livefs built on Launchpad (using a not very well documented and somewhat incomplete coded part of Launchpad which I think it only useable by this team for this purpose) https://launchpad.net/~ubuntu-cdimage/+livefs/ubuntu/xenial/kubuntu/ which are seem to be built with livefs-rootfs (says launchpad code ./lib/lp/soyuz/templates/livefs-new.pt). Then the ISO images are made by some magic proprietary script which takes the live image and adds its own stuff including UEFI support. http://people.canonical.com/~ubuntu-archive/cd-build-logs/kubuntu/xenial/ KDE neon UEFI implementation June 2016 ISO booting by UEFI support is done by copying the grub-efi files from a Kubuntu ISO, putting them in live-build and in the lb efi script copying it into the binary/ directory and extracting the efi images (with mcopy) to add the right files on the CD. The breeze-grub theme is added and boot name changed to Neon in grub.cfg. For UEFI support on installed systems Ubiquity needs a local apt archive on the CD image which contains grub-efi, we again grab a copy of this from Kubuntu images. It also needs a file called .disk/cd_type. Ubiquity installs the EFI files into /boot/EFI/efi/neon on the installed system but the path "efi/ubuntu" is hardcoded in two places. The fwup efi binary which is used for firmware updates installs to efi/ubuntu and the Grub efi binary is hardcoded to look in efi/ubuntu for grub.cfg so a patch in ubiquity copies our grub.cfg into efi/ubuntu (this patch need to be applied manually in the archive as the package is native not quilt). This has the downside that any changes in the ubuntu grub.cfg will get removed, similarly a later Ubuntu install will wipe the neon grub.cfg but as the code to set up grub.cfg is the same for both having a custom config which differs is a very niche setup. SecureBoot Support The shim, grub and linux binaries are all copied directly from Kubuntu and signed with that so this just works. If we want to make changes such as not hard coding efi/ubuntu in the grub binary we'd need to build it ourselves, sign up to Microsoft's approval scheme. This is left as future work. How this works with GPL 3 terms is another mystery for future work. Pinebook Images We're also building images for the Pinebook cheap ARM-based laptop. As of Decemeber 2017 we have built all of dev-unstable packages for ARM64 architecture. img_neon_xenial_devedition-gitunstable_arm64 build job will produce a .img disk image which can be dd'ed to a microSD card and booted up on Pinebook. Code to create image is in pangea-tooling. Unlike the ISO images which use live-build from Ubuntu this uses live-build from Debian. The images get made in Docker on master (Drax) amd64 server using QEMU to emulate arm, this is slow but necessary because we use process namespacing on our arm64 Docker setup for security. Similarly we use live-config from Debian rather than Casper from Ubuntu as this works in normal user-space while Casper needs faff with initramdisks. There are 3 custom parts: DRM driver in the Kernel https://github.com/ayufan-pine64/linux-pine64 Proprietary GLES implementation ( libMali.so ) https://github.com/shadeslayer/pine64-mali-x11 EULA http://files.pine64.org/doc/MALI/MALI%20EULA.pdf More info http://wiki.pine64.org/index.php/Mali_Driver X11 driver https://github.com/shadeslayer/xf86-video-armsoc We install Linux and Mali from Netrunner repos and build armsoc driver ourselves. Retrieved from "https://community.kde.org/index.php?title=Neon/InstallableImages&oldid=78920" This page was last edited on 20 December 2017, at 14:04. Content is available under Creative Commons License SA 4.0 unless otherwise noted.