Marble/Sentinel2MapTheme: Difference between revisions

From KDE Community Wiki
*>Tackat phab
*>Tackat phab
Line 107: Line 107:
Now launch QGIS. Press '''Ctrl-Shift-R''' (or '''Layer->Add Layer->Add Raster Layer'''). We'd like to load several .vrt files at once. However loading all would most likely require too much memory. So we have to load them in batches: Using the Ctrl-Key select the first six .vrt files inside the newly created vrts directory. Then press '''Open'''.
Now launch QGIS. Press '''Ctrl-Shift-R''' (or '''Layer->Add Layer->Add Raster Layer'''). We'd like to load several .vrt files at once. However loading all would most likely require too much memory. So we have to load them in batches: Using the Ctrl-Key select the first six .vrt files inside the newly created vrts directory. Then press '''Open'''.


(In case QGIS crashes on opening the vrt it might be due to a corrup jp2 file. In that case try to find out which jp2 is the culprit by trying to load the jp2 files into QGIS one by one via the Add Raster Layer feature. Once the corrupted jp2 is identified you can use the following workaround: copy it over by the jp2 with the closest band number. This will unfortunately result in a slightly different color shade).
(In case QGIS crashes on opening the vrt it might be due to a corrupt jp2 file. In that case try to find out which jp2 is the culprit by trying to load the jp2 files into QGIS one by one via the Add Raster Layer feature. Once the corrupted jp2 is identified you can use the following workaround: copy it over by the jp2 with the closest band number. This will unfortunately result in a slightly different color shade).


Now we want to apply proper colorization and styling:  The styling is stored inside the sentinel-marble.qml file (short for QGIS markup language - so it's NOT a Qt Quick file).
Now we want to apply proper colorization and styling:  The styling is stored inside the sentinel-marble.qml file (short for QGIS markup language - so it's NOT a Qt Quick file).

Revision as of 12:12, 26 June 2016

Satellite Map Theme based on the Sentinel 2 Mission

Introduction/Motivation

This page is about the process that allows to create a satellite map theme for Marble based on the Sentinel data.

Sentinels Scientific Data Hub

Registering at the SciHub

Go to the Registration website of the SciHub and enter your name, username, password, e-Mail and country. As a domain you can choose "Land" and "Research" for the usage.

Once you press the Register button you will receive an e-Mail which allows you to finalize your registration in the SciHub system by pressing the included link.

As an alternative to creating your own login you can use "guest/guest" as a username/password when logging in.

Looking for data

Go to the SciHub website and press the Login Button to enter it. On the right side you can press the layers button to choose between the Hybrid, Road (OpenStreetMap) and Satellite map (Blue Marble/LandSat) for orientation.

Now we are ready to query some actual Sentinel data. In order to limit our query to useful entries we recommend these adjustments: Press the menu button on the left of the query line edit to enter the Advanced Search

  • Check Mission: Sentinel-2
  • Enter [0 TO 10] in the cloud coverage Section

Press the menu button again. The button will turn into a filter icon. Then enter a country name (e.g. Germany). As a result of the query you will get a list of entries.

You can browse through the pages. The thumb nails give you an idea about the quality of the photographic images. You can press the "eye" button to get an enlarged version of the thumbnail and to get more information.

  • images that contain an area that hasn't been included in the map theme yet
  • images that ideally have no cloud cover
  • images that were taken in bright light.
  • images that includes a maximum amount of complete sub tiles (with a minimum of tilted cut off black portions). Eventually only those tiles which are complete (i.e. without clouds and black areas) will be of long-term value.
  • images that contain land masses or at least islands or coastlines. We are not interested in Ocean pictures since we will add an artificial ocean later on.
  • initially we should rather focus on populated areas in Europe.
  • the chosen areas should ideally be adjacent to existing tiles that have been downloaded so that we get "growing" areas.


Once you've made a choice we suggest that you write down:

  • the id of the entry (which you can retrieve by pressing the "eye" icon for the entry and copy the id from the title line.
  • and the download url

in a text file. Good examples are:

id: S2A_OPER_PRD_MSIL1C_PDMC_20160508T220612_R008_V20160508T104027_20160508T104027 url: https://scihub.copernicus.eu/dhus/odata/v1/Products('4658007a-76a0-455c-bb9a-d9e789b5e1e3')/$value

id: S2A_OPER_PRD_MSIL1C_PDMC_20160508T221741_R008_V20160508T104027_20160508T104027 url: https://scihub.copernicus.eu/dhus/odata/v1/Products('0ded3149-d971-4524-ab80-536ffc1cbb55')/$value

Now click the download link to download the tile. The download will amount to 4-7GB on average. Even if the download gets aborted in the browser it should be possible to continue the download later on. Depending on the connection the download might take a few hours. At times the SciHub server has temporary maintenance down times.

Once the zip file is download unzip it in a directory of your choice. Make sure that your hard disc still has enough space left (approx. 10 GB).

Note: There are also alternative sentinel data browsers available:

1. The Mundialis browser offers a nice search query that also works on smart phones.

2. Once QGIS is installed you could also download further tiles using the SCP plugin, however this approach lacks the nice thumbnails for introspection:

Using QGIS to edit the Sentinel 2 data

QGIS installation

In order to process the data you need to install QGIS. On Ubuntu/Debian you can do this e.g. by opening a terminal and type:

sudo apt-get update

Type in a terminal:

sudo apt-get install qgis

Installing the required plugins

Launch QGIS and enter the Plugins menu. There choose Manage and Install Plugins. Select Not Installed and choose the following plugins for installation in the list:

  • QTiles

Also we recommend the following tools:

  • Semi-Automatic Classification Plugin
  • OpenLayers Plugin

Once you installed the Semi-Automatic Classification Plugin please right-click on the toolbar and enable the SCP toolbar.

Using QGIS to create GeoTiffs for Sentinel-2 subtiles

The current image data is stored in jp2 files which cover one subtile each for a certain spectral band. For each subtile there are about 12 different spectral bands covered. The goal of this chapter is to merge these jp2 files in order to get realistic colors. The end result should be a smaller georeferenced RGB file with realistic colors.


Let's start:

Download the File:Sentinel.zip file and extract it in your home directory. It contains two files: createvrts.py and sentinel-marble.qml. Add the executable flag to the createvrts.py file.

Enter the GRANULE directory inside the .SAFE directory of the unzipped Sentinel-2 data. Then execute the createvrts.py createvrts.py script from inside that directory. It should create a vrts directory inside the GRANULE directory. Inside this directory you should find several .vrt files.

Now launch QGIS. Press Ctrl-Shift-R (or Layer->Add Layer->Add Raster Layer). We'd like to load several .vrt files at once. However loading all would most likely require too much memory. So we have to load them in batches: Using the Ctrl-Key select the first six .vrt files inside the newly created vrts directory. Then press Open.

(In case QGIS crashes on opening the vrt it might be due to a corrupt jp2 file. In that case try to find out which jp2 is the culprit by trying to load the jp2 files into QGIS one by one via the Add Raster Layer feature. Once the corrupted jp2 is identified you can use the following workaround: copy it over by the jp2 with the closest band number. This will unfortunately result in a slightly different color shade).

Now we want to apply proper colorization and styling: The styling is stored inside the sentinel-marble.qml file (short for QGIS markup language - so it's NOT a Qt Quick file).

  • Right-click on the first (file) entry in the Layers panel.
  • Press Properties.
  • Press the Style button in the lower left corner
  • Press Load Style and load the sentinel-marble-qml file.



  • Press Apply. As a result the color of the tile should change to something more vivid.
  • Right-click on the first (file) entry in the Layers panel again and choose Styles->Copy Style
  • Then right click on all other (file) entries in the Layers panel and choose Styles->Paste Style for each entry.


As a temporary result you should see something like this:




Now we want to save the resulting virtual tiles into actual GeoTIFF files:

  • Right-click on the first (file) entry in the Layers panel.
  • Choose Rename. Then copy the file name using Ctrl-C and press Enter.
  • Right-click on the first (file) entry in the Layers panel.
  • Choose Save As



  • As an Output mode in the dialog choose Rendered Image.
  • Click Browse Button in the Save As field, navigate to the tif directory inside the GRANULE directory. Press Ctrl+V to paste the layer name.
  • Enable the Create Options checkbox, choose JPEG Compression as a profile. Change JPEG_QUALITY to 85.
  • Press Ok and fetch a cup of coffee while the progressbar goes up to 100%.
  • Repeat this procedure for all other entries.


The resulting GeoTIFF files will contain the rendered image in RGB representation without storing each band. This is lighter on memory and is better suited for tile processing. As the GeoTIFF files amount to about 75 MB they are also better suited for long-term storage and data exchange than the original jp2 files. (if you forgot to enable the compression profile you can also compress the files using: gdal_translate -co COMPRESS=JPEG -co JPEG_QUALITY=85 inputfile.tif outputfile.tif )

It's important that you keep these GeoTIFF files (e.g. on a USB disk) to allow for recreating the slippy map tiles later on.

Once you are done with creating the first batch of GeoTiffs quit QGIS and restart it. Then repeat the steps in this chapter for the other vrt files until there is a GeoTIFF file for every vrt file.

Later on once you've downloaded more adjacent datasets from the Sentinel SciHub you can combine the GeoTIFF files:


Tile Creation

Press Ctrl-Shift-R (or Layer->Add Layer->Add Raster Layer) and load all GeoTIFFs that you've created so far.

With the new sentinel layer loaded and proper band sets in place we can now start to create our own tiles:

Press Plugins -> QTiles -> QTiles then

  • In the Output section choose Directory and browse to your directory of choice where the tiles should be stored
  • Enter sentinel2 as a Tileset name
  • In the Extent section choose Layer Extent
  • In the Zoom section choose 14 as a maximum zoom level
  • Choose JPG as a file format
  • Choose 85% as the Compression level
  • In the Parameters section enable Make lines appear less jagged and Render tiles outside of layers extents (within combined extent).


Questions:

1. Are there any other alternatives to using QTiles? Any better QGIS plugins than this?

Future step: Tileset postprocessing

The color range in the sentinel-marble.qml is chosen to allow for wide post processing. The idea is that a complete tile set can be easily batch-processed using image-magick or opencv. This could be done in the future to:

  • change the color gamma value / saturation
  • increase the green tint of land masses at lower zoom levels
  • reduce areas of overexposure

In the future we need to evaluate how this could be done exactly.

Compiling Marble with support for the Sentinel 2 data

Technically marble's current source code from the master development branch has experimental support for the Sentinel 2 Satellite Map theme built-in already. In order to enable the vector map theme you need to pass the cmake config option

-DEXPERIMENTAL_SENTINEL_MAP=ON

So in order to compile Marble with vector tile support just compile it as described here:

https://marble.kde.org/sources.php

and just add the config option above, e.g.

cmake  -DEXPERIMENTAL_SENTINEL_MAP=ON ~/marble/sources

Deployment on the server

For deploying the tiles on the server you can mostly follow the access instructions at:

Upload to our KDE server

For the actual upload of the tiles you can use rsync. From the current local sentinel2 folder you could e.g. call:

rsync -av --progress 13 14 [email protected]:/srv/maps/earth/sentinel2

to upload level and 13, 14.