Marble/NaturalEarth: Difference between revisions

From KDE Community Wiki
m (Reverted edits by Frinring (talk) to last revision by Ochurlaud)
 
(14 intermediate revisions by 5 users not shown)
Line 36: Line 36:
* Vector level attributes are stored in .dbf format which adds complexity to implementing shapefile support
* Vector level attributes are stored in .dbf format which adds complexity to implementing shapefile support


The ideal solution would seem be to convert the Natural Earth data into a more efficient file format that includes a zoom level attribute.  The full Natural Earth dataset would be converted, but would only ship the minimal dataset required with Marble (approx 4-5Mb?) with the remainder of the data later being downloaded via GHNS or as a separate package.
The ideal solution would seem be to convert the Natural Earth data into a more efficient file format and either calculate and store the zoom level attribute in the file or calculate it on file load.  The full Natural Earth dataset would be converted, but would only ship the minimal dataset required with Marble (approx 4-5Mb?) with the remainder of the data later being downloaded via GHNS or as a separate package.


=== Vector Layer Improvements ===
=== Vector Layer Improvements ===
Line 86: Line 86:
* Would benefit all vector formats, e.g. kml, ppx, shp
* Would benefit all vector formats, e.g. kml, ppx, shp


==== Possible new file format ====
==== Possible new file format (Proposed by John) ====
Potential new Marble file format based on PNT:
Potential new Marble file format based on PNT:
* 1st integer (32 bit): Latitude in arcseconds highest bit indicates new polygon starts: header information has to be read from 3rd integer
* 1st integer (32 bit): Latitude in arcseconds highest bit indicates new polygon starts: header information has to be read from 3rd integer
Line 97: Line 97:
* Roughly 533,202 x 8 bytes = 4 Mb for the country borders alone, not including internal border and coastline files
* Roughly 533,202 x 8 bytes = 4 Mb for the country borders alone, not including internal border and coastline files
* If that's too much to ship, then ship the 1:50m dataset as the default and download the 1:10m dataset once online
* If that's too much to ship, then ship the 1:50m dataset as the default and download the 1:10m dataset once online
==== Possible more size efficient new file format (Proposed by Torsten) ====
For the Natural Earth Layer providing the Default data set at 0.5 arcminute resolution should be enough.
This fileformat allows for even better packed data than the PNT format. For detailed polygons at arcminute scale on average it should use only 33% of the amount used by PNT.
=====Description of the file format=====
In the fileformat initally a file header is provided that provides the file format version and the number of polygons stored inside the file. A Polygon starts with the Polygon Header which provides the feature id and the number of so called "absolute nodes" that are about to follow. Absolute nodes always contain absolute geodetic coordinates. The Polygon Header also provides a flag that allows to specify whether the polygon is supposed to represent a line string ("0") or a linear ring ("1").
Each absolute node can be followed by relative nodes: These relative nodes are always nodes that follow in correct order inside the polygon after "their" absolute node.
Each absolute node specifies the number of relative nodes which contain relative coordinates in reference to their absolute node. So an absolute node provides the absolute reference for relative nodes across a theoretical area of 2x2 squaredegree-area (which in practice frequently might rather amount to 1x1 square degrees). 
So much of the compression works by just referencing lat/lon diffs to special "absolute nodes". Hence the compression will especially work well for polygons with many nodes with a high node density.
The parser has to convert these relative coordinates to absolute coordinates.
=====File Structure=====
'''File header'''
* quint8: File format version
* quint32: Number of polygons contained in the file.
'''Polygon Header'''
* quint32: Feature id (either Natural Earth or Geonames).
* quint32: Number of parent node chunks to follow
* quint8: Flags: 1st bit: polygonIsClosed
'''Absolute node chunk'''
* qint16: Latitude in halfarcminutes (allowed range = [-10800;+10800 ] halfarcminutes = [-90;+90 ] degrees )
* qint16: Longitude in halfarcminutes (allowed range = [-21600;+21600 ] halfarcminutes = [-180;+180 ] degrees )
* qint16: Number of child node chunks to follow (equals "0" if there are no child nodes)
'''Relative node chunk'''
* qint8: Latitude-diff in halfarcminutes compared to the parent (allowed range = [-60;+60] arcminutes = [-1;+1]  degrees)
* qint8: Longitude-diff in halfarcminutes compared to the parent (allowed range = [-60;+60] arcminutes = [-1;+1] degrees)


==== Attribute Database ====
==== Attribute Database ====
Line 109: Line 148:
to provide).  This would allow look-ups via whatever code or ID is available,  
to provide).  This would allow look-ups via whatever code or ID is available,  
and we wouldn't be reliant on Geonames IDs staying constant or being online.
and we wouldn't be reliant on Geonames IDs staying constant or being online.
==== Spatialite ====
One option would be to integrate Spatialite and use this as both the data storage for the vectors and as the attribute database.  Spatialite is an extension to SQLite implementing a Spatial SQL database.  Among the feature this provides is a compact data storage format and the ability to import Shapefiles and CSV files, as well as access all the standard GEOS tools if installed.
There is a 20Mb zip file available for Natural Earth in Spatialite format, it is unclear how much of Natural Earth is contained in this.  A minimal dataset could be shipped by default with the full dataset downloaded later.
Spatial SQL queries could return just those vectors currently in the viewport, but repeated reloading and redrawing could be inefficient.  However this may also solve the Level-of-Detail problem.
The major downside is the dependencies which include SQLite, PROJ and GEOS so on a platform like Windows would require a larger monolithic binary which defeats the purpose of shipping slimmed down data.
More research is required here.  It may not be a suitable option for the default Atlas view, but would be a very powerful extension for Marble to provide lightweight GIS-like functionality.


=== Action Plan ===
=== Action Plan ===
Line 114: Line 165:
A possible action plan is
A possible action plan is
# Fix GeoPainter LinearRings which contain a pole not rendered correctly
# Fix GeoPainter LinearRings which contain a pole not rendered correctly
# Implement Douglas-Peuker reduction in GeoDataLineString
# Implement Douglas-Peucker reduction in GeoDataLineString
# New PNT file format definition (with a different name, MBL?)
# New PNT file format definition (with a different name, MBL?)
# Metadata file format definition
# Metadata file format definition
# New GeoData PNT2 file loading code (convert old data).
# New GeoData PNT2 file loading code (convert old data).
# shp2pnt2 script to convert shp to new formats (using Perl::shp? there's  
# shp2pnt2 script to convert shp to new formats (using Perl::shp? there's shp2xxx scripts out there we could copy?), including matching to Geonames ID
shp2xxx scripts out there we could copy?), including matching to Geonames ID
# split files into 'ship with', 'download asap', 'ghns'
# split files into 'ship with', 'download asap', 'ghns'@


Later add simple shapefile loading to GeoData, maybe with attibute layer?
Later add simple shapefile loading to GeoData, maybe with attibute layer?

Latest revision as of 04:59, 26 October 2016

Natural Earth

Introduction

Marble currently uses the very old and outdated MWDBII dataset for its vector base map such as national borders and coastlines and we really need to replace it with more up-to-date data. However, MWDBII has two key advantages, it is very compact in size enabling Marble to ship it by default, and the individual nodes have a zoom level value which speeds up drawing.

The current vector layer also has the disadvantage of not being able to be manipulated either programtiacally or by the user. This prevents it from being used for such things as KGeography or other educational uses where you would want to select and manipulate a geographic entity.

Improving the vector base maps would thus consist of two closely related parts:

  • Improving the vector drawing code to allow interaction with the vectors, and improved performance to allow more detailed vectors to be drawn.
  • Importing a new base layer dataset.

Using NaturalEarth

The Natural Earth data set is a "public domain map dataset available at 1:10m, 1:50m, and 1:110 million scales. Featuring tightly integrated vector and raster data, with Natural Earth you can make a variety of visually pleasing, well-crafted maps with cartography or GIS software." This data set seems ideal as a replacement for the MWDBII.

Advantages:

  • Free / Public Domain data
  • Regularly updated
  • Wide variety of political and geographic features
  • Available at 3 different scales: 1:10m 1:50m and 1:110m
  • All feature nodes at same scale are matched
  • Data attributes such as country code, population, relative magnitude, etc

Disadvantages:

  • Is in Shapefile format which is space inefficient
  • No per node zoom level attribute
  • Different scale datasets do not match so cannot efficiently be used together for zooming

The 1:10m dataset seems ideal as the base map in Marble as it provides a higher level of detail than the current MWDBII. The 1:110m dataset seems ideal for use in a country selector widget in kdelibs. The 1:50m dataset is less detailed than the current MWDBII so may be less useful.

Using the data in the default shapefile format is not considered desirable however:

  • No shapefile format support in Marble (yet), would have to rely on an external library or write our own
  • Space inefficient (14Mb vs 2.6Mb for MWDBII)
  • No zoom level attribute or any node level attributes which would slow drawing
  • Vector level attributes are stored in .dbf format which adds complexity to implementing shapefile support

The ideal solution would seem be to convert the Natural Earth data into a more efficient file format and either calculate and store the zoom level attribute in the file or calculate it on file load. The full Natural Earth dataset would be converted, but would only ship the minimal dataset required with Marble (approx 4-5Mb?) with the remainder of the data later being downloaded via GHNS or as a separate package.

Vector Layer Improvements

The main changes required to Marble will be in the vector layer itself, removing the old PNT file vector drawing code and implementing the new dataset using the new GeoData library vector support.

Two main issues will need to be solved here

  • if a new file format is needed for efficient storage
  • if a zoom level attribute is needed for fast drawing, and if so where and how to implement the attribute

Some possibilities for the file format are:

  • Adapt the existing PNT format used for MWDBII to have a higher degree of accuracy and add an attributes table
  • Use the existing Marble serial/cache format which will be faster but the size efficiency may not be sufficient
  • Use shapefile by implementing a lightweight parser without dbf support but our own simple attribute table.
  • Implement full shapefile support including dbf (possibly using libshape)

The zoom level problem can be solved by either:

  • Calculate a zoom level for each point during the file conversion and save it in the new file format, but this will require more storage space.
  • Improve the vector drawing layer to calculate the zoom level on the fly, which would benefit all vector drawing but may be too slow.

The Douglas-Peucker algorithm may be able to be used here.

Some pros/cons to consider:

  • The 1:10m country file is 6.55MB and contains 533,202 points = 12.28

bytes/point compared to the PNT which is 745KB and contains 127,246 points = 5.85 bytes/point, which would suggest the NE data in PNT format would be half the size, so 6 MB in total. This could probably be further reduced by a light application of Douglas-Peucker.

  • The NE shapefiles have been carefully processed so shared borders and

overlapping features like rivers match exactly and other such niceties, applying the Douglas-Peucker algorithm might affect that.

  • A shapefile parser would allow users/apps to load other shapefiles.
  • We would have to reconvert and check the data every time there's a new NE

release which could be a lot of effort, but an automated shp2pnt script could prove useful to allow apps/users to display their own shapefiles in a simple way.

  • It is unknown if the D-H algorithm can be deployed in a way to mark each point with a detail level rather than just throwing the points away.

Calculating Zoom Level on the fly

Using GeoPainter and GeoDataLineString ("libgeodata"):

  • Apply Douglas-Peuker dynamically in GeoDataLineString class to set Detail Level
  • When GeoDataLineString modified (add/del point) set dirty flag
  • When node accessed for drawing, Dirty flag would trigger D-P to calculate detail level and unset dirty flag
  • Would benefit all vector formats, e.g. kml, ppx, shp

Possible new file format (Proposed by John)

Potential new Marble file format based on PNT:

  • 1st integer (32 bit): Latitude in arcseconds highest bit indicates new polygon starts: header information has to be read from 3rd integer
  • 2nd integer (32 bit): Longitude in arcseconds
  • Optional 3rd integer: feature key highest bit feature geometry (line or ring).

Applying this to the 1:10m dataset:

  • Each point takes 64 bits/8 bytes
  • The start of each polygon takes 96 bits
  • Roughly 533,202 x 8 bytes = 4 Mb for the country borders alone, not including internal border and coastline files
  • If that's too much to ship, then ship the 1:50m dataset as the default and download the 1:10m dataset once online

Possible more size efficient new file format (Proposed by Torsten)

For the Natural Earth Layer providing the Default data set at 0.5 arcminute resolution should be enough. This fileformat allows for even better packed data than the PNT format. For detailed polygons at arcminute scale on average it should use only 33% of the amount used by PNT.

Description of the file format

In the fileformat initally a file header is provided that provides the file format version and the number of polygons stored inside the file. A Polygon starts with the Polygon Header which provides the feature id and the number of so called "absolute nodes" that are about to follow. Absolute nodes always contain absolute geodetic coordinates. The Polygon Header also provides a flag that allows to specify whether the polygon is supposed to represent a line string ("0") or a linear ring ("1"). Each absolute node can be followed by relative nodes: These relative nodes are always nodes that follow in correct order inside the polygon after "their" absolute node. Each absolute node specifies the number of relative nodes which contain relative coordinates in reference to their absolute node. So an absolute node provides the absolute reference for relative nodes across a theoretical area of 2x2 squaredegree-area (which in practice frequently might rather amount to 1x1 square degrees).

So much of the compression works by just referencing lat/lon diffs to special "absolute nodes". Hence the compression will especially work well for polygons with many nodes with a high node density.

The parser has to convert these relative coordinates to absolute coordinates.

File Structure

File header

  • quint8: File format version
  • quint32: Number of polygons contained in the file.

Polygon Header

  • quint32: Feature id (either Natural Earth or Geonames).
  • quint32: Number of parent node chunks to follow
  • quint8: Flags: 1st bit: polygonIsClosed

Absolute node chunk

  • qint16: Latitude in halfarcminutes (allowed range = [-10800;+10800 ] halfarcminutes = [-90;+90 ] degrees )
  • qint16: Longitude in halfarcminutes (allowed range = [-21600;+21600 ] halfarcminutes = [-180;+180 ] degrees )
  • qint16: Number of child node chunks to follow (equals "0" if there are no child nodes)

Relative node chunk

  • qint8: Latitude-diff in halfarcminutes compared to the parent (allowed range = [-60;+60] arcminutes = [-1;+1] degrees)
  • qint8: Longitude-diff in halfarcminutes compared to the parent (allowed range = [-60;+60] arcminutes = [-1;+1] degrees)

Attribute Database

Metadata file:

  • convert / filter dbf into our own format
  • could just be csv or xml? or sqlite?

Rather than the Geonames ID, we could just use the Natural Earth object ID, then a look-up file/table that matches the NE ID to the ISO / FIPS / whatever code (NE provides this in the metadata) and Geonames ID (which we would have to provide). This would allow look-ups via whatever code or ID is available, and we wouldn't be reliant on Geonames IDs staying constant or being online.

Spatialite

One option would be to integrate Spatialite and use this as both the data storage for the vectors and as the attribute database. Spatialite is an extension to SQLite implementing a Spatial SQL database. Among the feature this provides is a compact data storage format and the ability to import Shapefiles and CSV files, as well as access all the standard GEOS tools if installed.

There is a 20Mb zip file available for Natural Earth in Spatialite format, it is unclear how much of Natural Earth is contained in this. A minimal dataset could be shipped by default with the full dataset downloaded later.

Spatial SQL queries could return just those vectors currently in the viewport, but repeated reloading and redrawing could be inefficient. However this may also solve the Level-of-Detail problem.

The major downside is the dependencies which include SQLite, PROJ and GEOS so on a platform like Windows would require a larger monolithic binary which defeats the purpose of shipping slimmed down data.

More research is required here. It may not be a suitable option for the default Atlas view, but would be a very powerful extension for Marble to provide lightweight GIS-like functionality.

Action Plan

A possible action plan is

  1. Fix GeoPainter LinearRings which contain a pole not rendered correctly
  2. Implement Douglas-Peucker reduction in GeoDataLineString
  3. New PNT file format definition (with a different name, MBL?)
  4. Metadata file format definition
  5. New GeoData PNT2 file loading code (convert old data).
  6. shp2pnt2 script to convert shp to new formats (using Perl::shp? there's shp2xxx scripts out there we could copy?), including matching to Geonames ID
  7. split files into 'ship with', 'download asap', 'ghns'

Later add simple shapefile loading to GeoData, maybe with attibute layer?

Natural Earth Datasets

Dataset Sizes

Key Natural Earth data files from v1.2, recent updates to 1.3 not included.

                            1:110m     1:50m       1:10m
                            ------    -------     -------
Admin level 0 countries     172 KB    1.36 MB     6.55 MB
Admin level 0 land borders   39 KB     301 KB      896 KB
Admin level 0 sea borders    12 KB      40 KB       79 KB
Admin level 0 disputed                  40 KB      157 KB
Admin level 1 regions        39 KB     339 MB     13.9 MB *
Admin level 1 land borders   16 KB      60 KB     4.82 MB
Coastlines                   79 KB     883 KB     2.15 MB
Rivers                       19 KB     420 KB     3.29 MB
Lakes                        10 KB     286 KB      786 MB              
Glaciers                     13 KB     208 KB     1.23 MB
Dateline                     18 KB      18 KB       18 KB
Playas                                  18 KB      106 KB
Ice Shelves                            105 KB      211 KB
Minor Islands                                      449 KB
Reefs                                              171 KB
                           -------    -------   ---------
                            417 KB    4.08 MB    34.03 MB

* level 1 regions are USA/Canada only at 110m and 50m, but whole world at 10m, 
perfect for KGeography use :-)

Other useful files:
Physical Features Land      146 KB    1.50 MB      692 KB
Physical Features Sea       348 KB     836 KB      836 MB
Populated Places                       347 KB     1.48 MB
Urban Areas                            439 KB     3.48 MB
Bathmetry                                        11.64 MB

Dataset Details

  • Countries
    • matched boundary lines and polygons with names attributes for countries and

sovereign states. Includes dependencies (French Polynesia), map units (U.S. Pacific Island Territories) and sub-national map subunits (Corsica versus mainland Metropolitan France).

    • Core data
  • Disputed areas and breakaway regions
    • From Kashmir to the Elemi Triangle, Northern Cyprus to Western Sahara.
    • Core data
  • Internal boundaries
    • Core data??
  • Coastline
    • ocean coastline, including major islands. Coastline is matched to land and water polygons.
    • Core data?
  • First order admin (provinces, departments, states, etc.)
    • internal boundaries and polygons for all but a few tiny island nations. Includes names attributes and some statistical groupings of the same for smaller countries.
    • Optional download
  • Populated places
    • point symbols with name attributes. Includes capitals, major cities and towns, plus significant smaller towns in sparsely inhabited regions. We favor regional significance over population census in determining rankings.
    • Optional download, or use to replace current places file?
  • Urban polygons
    • derived from 2002-2003 MODIS satellite data.
    • Optional download
  • Pacific nation groupings
    • boxes for keeping these far-flung islands tidy.
    • Optional download
  • Water boundary indicators
    • partial selection of key 200-mile nautical limits, plus some disputed, treaty, and median lines.
    • Optional download
  • Land
    • Land polygons including major islands
    • Optional download
  • Ocean
    • Ocean polygon split into contiguous pieces.
    • Optional download
  • Minor Islands
    • additional small ocean islands ranked to two levels of relative importance.
    • Optional download
  • Reefs
    • major coral reefs from WDB2.
    • Optional download
  • Physical region features
    • polygon and point labels of major physical features.
    • Optional download
  • Rivers and Lake Centerlines
    • ranked by relative importance. Includes name and line width attributes. Don’t want minor lakes? Turn on their centerlines to avoid unseemly data gaps.
    • Optional download
  • Lakes
    • Ranked by relative importance, coordinating with river ranking. Includes name attributes.
    • Optional download
  • Glaciated areas
    • polygons derived from DCW, except for Antarctica derived from MOA. Includes name attributes for major polar glaciers.
    • Optional download
  • Antarctic ice shelves
    • Derived from 2003-2004 MOA. Reflects recent ice shelf collapses.
    • Optional download
  • Bathymetry
    • nested polygons at 0, -200, -1,000, -2,000, -3,000, -4,000, -5,000, -6,000, -7,000, -8,000, -9,000,and -10,000 meters. Created from SRTM Plus.
    • Optional download
  • Parks and protected areas
    • US Only
    • Don't use, maybe user download layer
  • Geographic lines
    • Polar circles, tropical circles, equator, and International Date Line.
    • Probably not useful to Marble as we have a plugin for most of these.
    • International Date Line could be extracted
  • Graticules
    • 1-, 5-, 10-, 15-, 20-, and 30-degree increments. Includes WGS84 bounding box.
    • Probably not useful to Marble as we have a Graticle plugin.