Marble/AndroidCompiling: Difference between revisions

From KDE Community Wiki
No edit summary
 
(19 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{Construction}}
This page presents how to compile Marble for Android, using the Android SDK, Android NDK and Qt for Android, and how to deploy it to your device. Additional, more detailled instructions can be found in the  [https://community.kde.org/Android Community Wiki] also.
 
This page present how to compile Marble for Android, using the Android SDK, Android NDK and Qt for Android, and how to deploy it to your device.


=== Prerequisites ===
=== Prerequisites ===
Line 7: Line 5:
You will need the following tools:
You will need the following tools:
# Android SDK - It can be downloaded from here: http://developer.android.com/sdk/index.html
# Android SDK - It can be downloaded from here: http://developer.android.com/sdk/index.html
{{Note|The SDK contains binary 32 bit tools that are required to create the Marble package. If you're running a 64 bit system, install support for running 32 bit applications.}}  
{{Note|The SDK contains binary 32 bit tools that are required to create the Marble package. If you're running a 64 bit system, install the 32 bit versions of libgcc, zlib and libc to be able to run them.}}  
# Android NDK - You can download it from here: https://developer.android.com/ndk/index.html
# Android NDK - You can download it from here: https://developer.android.com/ndk/downloads/
# Qt with support for Android devices. Download the best one for you: https://www.qt.io/download-open-source/#section-2 and install it, but be sure that the Android support is installed too (for example you have to check in to install it in the online installer).
# Qt with support for Android devices. Download the best one for you: https://www.qt.io/download-open-source/#section-2 and install it, but be sure that the Android support is installed too (for example you have to check in to install it in the online installer).
# CMake - Usually you should be able to install it from your repository.
# CMake - Usually you should be able to install it from your repository.
Line 17: Line 15:
#<syntaxhighlight lang="bash">/path_where_you_installed_the_sdk/tools/android sdk</syntaxhighlight>
#<syntaxhighlight lang="bash">/path_where_you_installed_the_sdk/tools/android sdk</syntaxhighlight>


Make sure to install the following platforms:
Make sure to install the platform version 22.
# 10
 
# 11
{{Note|The latest Android build tools won't work with Qt and you will get errors regarding the generation of build.xml . Hence, download the SDK Tools version r25.2.5 and replace the "tools" folder in your Android SDK root folder with it.}}
# 16
# 18
# 19
# 22


=== Getting the Marble Source Code  ===
=== Getting the Marble Source Code  ===
Line 35: Line 29:
First, you should change your working directory to Marble's source directory:
First, you should change your working directory to Marble's source directory:
<syntaxhighlight lang="bash">cd ~/marble/sources</syntaxhighlight>
<syntaxhighlight lang="bash">cd ~/marble/sources</syntaxhighlight>
Then the toolchain have to be cloned from its git repository:
Then the toolchain has to be cloned from its git repository:
<syntaxhighlight lang="bash">git clone git://anongit.kde.org/extra-cmake-modules</syntaxhighlight>
<syntaxhighlight lang="bash">git clone git://anongit.kde.org/extra-cmake-modules</syntaxhighlight>
We will use this to compile Marble and pack it as an apk.
We will use this to compile Marble and pack it as an apk.


=== Setting your PATH ===
=== Setting your ENV variables ===
You have to add the following paths to your PATH:
You have to add the following environment variables:


Android NDK:
Android NDK:
<syntaxhighlight lang="bash">export ANDROID_NDK=/path_to_your_NDK_install</syntaxhighlight>
<syntaxhighlight lang="bash">export ANDROID_NDK_ROOT=/path_to_your_NDK_install
# sadly extra-cmake-modules uses another variable name than Marble, which also needs to be set:
export ANDROID_NDK=$ANDROID_NDK_ROOT</syntaxhighlight>
Android SDK:
Android SDK:
<syntaxhighlight lang="bash">export ANDROID_SDK=/path_to_your_SDK_install</syntaxhighlight>
<syntaxhighlight lang="bash">export ANDROID_SDK_ROOT=/path_to_your_SDK_install</syntaxhighlight>
Ant:
Ant:


You can get the path to the binary with:
You can get the path to the binary with:
<syntaxhighlight lang="bash">whereis ant</syntaxhighlight>
<syntaxhighlight lang="bash">whereis ant</syntaxhighlight>
After you know the path:
After you know the path (note that this must be an executable file, not a directory):
<syntaxhighlight lang="bash">export ANT=/path_to_ant</syntaxhighlight>
<syntaxhighlight lang="bash">export ANT=/path/to/ant</syntaxhighlight>
Java:
Java:


Line 60: Line 56:
For example, if you installed Qt in /opt/Qt you have to set the following on a 64 bit system:
For example, if you installed Qt in /opt/Qt you have to set the following on a 64 bit system:
<syntaxhighlight lang="bash">export Qt5_android=/opt/Qt/5.4/android_armv7</syntaxhighlight>
<syntaxhighlight lang="bash">export Qt5_android=/opt/Qt/5.4/android_armv7</syntaxhighlight>
Also specify the location of extra-cmake-modules:
Also specify the location of extra-cmake-modules (replace /path/to/extra-cmake-modules below with the folder where you cloned extra-cmake-modules to in the step above):
<syntaxhighlight lang="bash">export ECM=/path/to/extra-cmake-modules</syntaxhighlight>
<syntaxhighlight lang="bash">export ECM=/path/to/extra-cmake-modules</syntaxhighlight>


And you also need to specify your target platform (at least 22, but after the build the package will be backward compatible):
And you also need to specify your target platform (at least 22, but after the build the package will be backward compatible):
<syntaxhighlight lang="bash">export ANDROID_PLATFORM=android-22</syntaxhighlight>
<syntaxhighlight lang="bash">export ANDROID_PLATFORM=android-22</syntaxhighlight>
=== Setting up Kirigami  ===
You will also need to get Kirigami, which you can get here: https://github.com/KDE/kirigami
After cloning the source code change your working directory to the Kirigami's source directory:
<syntaxhighlight lang="bash">cd path/to/kirigami</syntaxhighlight>
Then create a build folder and navigate to it:
<syntaxhighlight lang="bash">mkdir build
cd build</syntaxhighlight>
After that we need to configure the project using Cmake:
<syntaxhighlight lang="bash">cmake ..  -DCMAKE_TOOLCHAIN_FILE=${ECM}/toolchain/Android.cmake -DCMAKE_PREFIX_PATH=${Qt5_android} -DCMAKE_INSTALL_PREFIX=~/marble/export -DECM_DIR=/usr/local/share/ECM/cmake </syntaxhighlight>
Then you install the files using:
<syntaxhighlight lang="bash">make
make install</syntaxhighlight>
This should install all the files required by Kirigami in ~/marble/export or whichever other path you passed in the <code>-DCMAKE_INSTALL_PREFIX</code> option to Cmake.


=== Compiling Marble ===
=== Compiling Marble ===
Line 71: Line 81:
Than change your working directory to it:
Than change your working directory to it:
<syntaxhighlight lang="bash">cd ~/marble/build</syntaxhighlight>
<syntaxhighlight lang="bash">cd ~/marble/build</syntaxhighlight>
Then the project have to be configured with Cmake. First we will build the libraries and the plugins, after that we will build the app.
Then the project has to be configured with Cmake. First we will build the libraries and the plugins, after that we will build the app.


First, run the following command:
First, run the following command:
<syntaxhighlight lang="bash">cmake -DCMAKE_TOOLCHAIN_FILE="${Qt5_android_cmake}/toolchain/android.toolchain.cmake" -DCMAKE_BUILD_TYPE=Release -DQT_NO_WEBKIT=TRUE -DQT_NO_PRINTER=TRUE  -DQT_NO_DBUS=TRUE -DCMAKE_INSTALL_PREFIX=../export ../sources/
<syntaxhighlight lang="bash">cmake -DECM_ADDITIONAL_FIND_ROOT_PATH=${Qt5_android} -DCMAKE_TOOLCHAIN_FILE="${ECM}/toolchain/Android.cmake" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=../export ../sources/
</syntaxhighlight>
</syntaxhighlight>
This will generate the needed Makefile for compiling. Start the build process with the following command:
This will generate the needed Makefile for compiling. Start the build process with the following command:

Latest revision as of 23:53, 14 December 2018

This page presents how to compile Marble for Android, using the Android SDK, Android NDK and Qt for Android, and how to deploy it to your device. Additional, more detailled instructions can be found in the Community Wiki also.

Prerequisites

You will need the following tools:

  1. Android SDK - It can be downloaded from here: http://developer.android.com/sdk/index.html

Note

The SDK contains binary 32 bit tools that are required to create the Marble package. If you're running a 64 bit system, install the 32 bit versions of libgcc, zlib and libc to be able to run them.
  1. Android NDK - You can download it from here: https://developer.android.com/ndk/downloads/
  2. Qt with support for Android devices. Download the best one for you: https://www.qt.io/download-open-source/#section-2 and install it, but be sure that the Android support is installed too (for example you have to check in to install it in the online installer).
  3. CMake - Usually you should be able to install it from your repository.
  4. Java Development Kit - For example you can install openjdk, usually it should be in your repository.
  5. Ant - This should be available from the repositories too.

Some Android platforms will be needed, you should install them with the Android SDK's package manager. It can be started with:

  1. /path_where_you_installed_the_sdk/tools/android sdk
    

Make sure to install the platform version 22.

Note

The latest Android build tools won't work with Qt and you will get errors regarding the generation of build.xml . Hence, download the SDK Tools version r25.2.5 and replace the "tools" folder in your Android SDK root folder with it.


Getting the Marble Source Code

  1. Start a terminal
  2. We download the source code by cloning the developer repository with the following command:
git clone git://anongit.kde.org/marble ~/marble/sources

After you run the git clone command (shown above), all the Marble source files and considerable resource files will be found in a folder called marble in your home directory.

Getting the CMake toolchain for Android

First, you should change your working directory to Marble's source directory:

cd ~/marble/sources

Then the toolchain has to be cloned from its git repository:

git clone git://anongit.kde.org/extra-cmake-modules

We will use this to compile Marble and pack it as an apk.

Setting your ENV variables

You have to add the following environment variables:

Android NDK:

export ANDROID_NDK_ROOT=/path_to_your_NDK_install
# sadly extra-cmake-modules uses another variable name than Marble, which also needs to be set:
export ANDROID_NDK=$ANDROID_NDK_ROOT

Android SDK:

export ANDROID_SDK_ROOT=/path_to_your_SDK_install

Ant:

You can get the path to the binary with:

whereis ant

After you know the path (note that this must be an executable file, not a directory):

export ANT=/path/to/ant

Java:

Path to your Java installation, for example:

export JAVA_HOME=/usr/lib/jvm/java-7-openjdk

Qt:

For example, if you installed Qt in /opt/Qt you have to set the following on a 64 bit system:

export Qt5_android=/opt/Qt/5.4/android_armv7

Also specify the location of extra-cmake-modules (replace /path/to/extra-cmake-modules below with the folder where you cloned extra-cmake-modules to in the step above):

export ECM=/path/to/extra-cmake-modules

And you also need to specify your target platform (at least 22, but after the build the package will be backward compatible):

export ANDROID_PLATFORM=android-22

Setting up Kirigami

You will also need to get Kirigami, which you can get here: https://github.com/KDE/kirigami After cloning the source code change your working directory to the Kirigami's source directory:

cd path/to/kirigami

Then create a build folder and navigate to it:

mkdir build
cd build

After that we need to configure the project using Cmake:

cmake ..  -DCMAKE_TOOLCHAIN_FILE=${ECM}/toolchain/Android.cmake -DCMAKE_PREFIX_PATH=${Qt5_android} -DCMAKE_INSTALL_PREFIX=~/marble/export -DECM_DIR=/usr/local/share/ECM/cmake

Then you install the files using:

make
make install

This should install all the files required by Kirigami in ~/marble/export or whichever other path you passed in the -DCMAKE_INSTALL_PREFIX option to Cmake.

Compiling Marble

First of all, create a build directory in marble's source dir:

mkdir ~/marble/build

Than change your working directory to it:

cd ~/marble/build

Then the project has to be configured with Cmake. First we will build the libraries and the plugins, after that we will build the app.

First, run the following command:

cmake -DECM_ADDITIONAL_FIND_ROOT_PATH=${Qt5_android} -DCMAKE_TOOLCHAIN_FILE="${ECM}/toolchain/Android.cmake" -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=../export ../sources/

This will generate the needed Makefile for compiling. Start the build process with the following command:

make install/strip

Generating the Android Application Package (APK)

After the build successfully finished, the files have been installed to ../export or whichever other path you passed in the -DCMAKE_INSTALL_PREFIX option to cmake. Now run the Python script src/apps/marble-maps/create-apk.py to generate the Android package:

~/marble/sources/src/apps/marble-maps/create-apk.py --target MarbleMaps.apk ../export

The script provides a number of parameters. Typical usage is as follows:

  • Testing directly on a connected device: create-apk.py --reinstall /path/to/marble/export
  • Creating an .apk locally: create-apk.py --target MarbleMaps.apk /path/to/marble/export
  • Creating a signed package for release: create-apk.py --target MarbleMaps.apk --keystore /path/to/Marble.keystore /path/to/marble/export. You'll be prompted for the required passwords (unless you pass them using the --storepass option).

All parameters of create-apk.py can be shown with its --help switch:

usage: create-apk.py [-h] [--target TARGET] [--keystore KEYSTORE]
                     [--storepass STOREPASS] [--release] [--install]
                     [--reinstall]
                     directory

Create an Android application package (APK) for Marble Maps

positional arguments:
  directory             The directory where the Android build is installed to

optional arguments:
  -h, --help            show this help message and exit
  --target TARGET       Target filename (or directory) for the .apk package
  --keystore KEYSTORE   Keystore file for signing the package
  --storepass STOREPASS
                        Keystore password for signing the package
  --release             Build a release package
  --install             Install the package to a connected device
                        (uninstalling it before, if needed)
  --reinstall           Install the package to a connected device (keeping
                        previous data intact, if any)