Krita/linuxbuild: Difference between revisions

From KDE Community Wiki
No edit summary
(Ubuntu specific precious informations for 17.04 and up. Also , warning about Ubuntu L.T.S and its derivatives (Linux Mint/Elementary))
Line 40: Line 40:
  libpng-dev \
  libpng-dev \
  libopencolorio-dev
  libopencolorio-dev
'''Notes: '''
Ubuntu L.T.S and its derivatives (Linux Mint/Elementary) use too old packages to build Krita 4.x. If you want to compile Krita, use the short term support releases. You'll also need to compile with this flags during cmake:
  -DPYTHON_EXECUTABLE=/usr/bin/python3 -DPYQT_SIP_DIR_OVERRIDE=/usr/share/sip/PyQt5
If you compile a custom version of library (eg. a more recent Qt version  in /opt ), you can add the path to this type of flag to let Krita know about it.
  -DCMAKE_PREFIX_PATH=/opt/qt59


=== Arch Linux dependencies ===
=== Arch Linux dependencies ===

Revision as of 23:19, 8 September 2017

Preparation

This guide explains how to build Krita from standard Qt 5 and KDE Frameworks 5 development packages provided with your favorite linux distribution. This should be straightforward, but for more detail you can look into the old instructions for building Calligra.

Debian/Ubuntu dependencies

Here are the names of Krita's dependencies in the Debian repositories.

sudo apt install extra-cmake-modules \
 libkf5archive-dev  \
libkf5completion-dev  \
libkf5config-dev \
libkf5coreaddons-dev  \
libkf5guiaddons-dev  \
libkf5i18n-dev  \
libkf5itemmodels-dev  \
libkf5itemviews-dev \
libkf5widgetsaddons-dev  \
libkf5windowsystem-dev \
 libkf5kiocore5  \
libkf5crash-dev \
libkf5kio-dev \
 qtbase5-dev  \
libqt5svg5-dev \
libqt5multimedia5 \
qtdeclarative5-dev  \
libqt5x11extras5-dev  \
libqt5opengl5-dev \
libeigen3-dev \
libxi-dev \
libboost-all-dev \
libopenexr-dev  \
vc-dev \
libexiv2-dev \
libgsl-dev \
liblcms2-dev \
libpoppler-qt5-dev \
shared-mime-info  \
libraw-dev \
libfftw3-dev \
libpng-dev \
libopencolorio-dev

Notes: Ubuntu L.T.S and its derivatives (Linux Mint/Elementary) use too old packages to build Krita 4.x. If you want to compile Krita, use the short term support releases. You'll also need to compile with this flags during cmake:

  -DPYTHON_EXECUTABLE=/usr/bin/python3 -DPYQT_SIP_DIR_OVERRIDE=/usr/share/sip/PyQt5

If you compile a custom version of library (eg. a more recent Qt version in /opt ), you can add the path to this type of flag to let Krita know about it.

  -DCMAKE_PREFIX_PATH=/opt/qt59

Arch Linux dependencies

Building Krita 3.x on Arch requires often to check the last PKGBUILD of official Arch Package.

To do this, go to [[1]] and check the 'Source File' ( top-right ) and then open the PKGBUILD file [[2]]. It will give you hint if you miss or need to add a library. At september 2016, the list look like this:

sudo pacman -S --needed base-devel kio kitemmodels gsl libraw opencolorio exiv2 openexr fftw curl boost-libs hicolor-icon-theme extra-cmake-modules kdoctools python boost eigen vc poppler-qt5 poppler-qt5

Fedora dependencies

sudo dnf install -y extra-cmake-modules \ 
 make cmake automake gcc gcc-c++ kernel-devel \
 kf5-karchive-devel \
 kf5-kcompletion-devel \
 kf5-kconfig-devel \
 kf5-kcoreaddons-devel \
 kf5-kguiaddons-devel \
 kf5-ki18n-devel \
 kf5-kitemmodels-devel \
 kf5-kitemviews-devel \
 kf5-kwidgetsaddons-devel \
 kf5-kwindowsystem-devel \
 kf5-kio-core \
 kf5-kcrash-devel \
 kf5-kio-devel \
 qt5-qtbase \
 qt5-qtbase-devel \
 qt5-qtsvg-devel \
 qt5-qtmultimedia qt5-qtmultimedia-devel \
 qt5-qtdeclarative-devel \
 qt5-qtx11extras-devel \
 eigen3-devel \
 libXi-devel \
 boost-* boost-*-devel \
 OpenEXR-libs OpenEXR-devel \
 exiv2-libs exiv2-devel libgexiv2 \
 gsl-devel \
 lcms2-devel \
 poppler-qt5-devel \
 shared-mime-info \
 LibRaw-devel \
 fftw-devel \
 libpng-devel \
 OpenColorIO-devel

Building Krita

Once you have installed the dependencies, you are ready to clone the Krita repository.

cd ~/kf5/src               (Or, wherever you want to download the source code)
git clone git://anongit.kde.org/krita


CMake commands

Krita's build system has diverged from the Calligra build system. For example, Krita does not use productsets any longer.

Optimization level RelWithDebInfo is nearly always good enough for everyday debugging, and it can be used to paint with. Basically we have two build modes: for painters and for developers.

For painters:

  • disable unittests so the build becomes faster
  • disable safe asserts. it means when a not-too-serious problem arises, Krita will just dump a warning message into the console instead of crashing with an assert.
cd ~/kf5/build/krita
cmake ~/kf5/src/krita \                         ## your source directory
   -DCMAKE_INSTALL_PREFIX=~/kf5/inst \          ## your installation directory
   -DCMAKE_BUILD_TYPE=RelWithDebInfo \
   -DBUILD_TESTING=FALSE \
   -DHIDE_SAFE_ASSERTS=TRUE
make -j8 install

For developers:

  • enable unittests so you never break the builds
  • enable safe asserts. If a safe assert happens, it means there is a bug in Krita and should be fixed, ever though recovery procedure can workaround it.
cd ~/kf5/build/krita
cmake ~/kf5/src/krita \                         ## your source directory
   -DCMAKE_INSTALL_PREFIX=~/kf5/inst \          ## your installation directory
   -DCMAKE_BUILD_TYPE=RelWithDebInfo \
   -DBUILD_TESTING=TRUE \
   -DHIDE_SAFE_ASSERTS=FALSE
make -j8 install


Remember that you can change build settings with cmake . -DNEW_SETTING or by using cmake-gui found in the package cmake-qt-gui

Environment variables

XDG_DATA_DIRS. You need only one environment variable to run Krita 3:

export XDG_DATA_DIRS=~/kf5/inst/share:$XDG_DATA_DIRS

KRITA_PLUGIN_PATH. Currently, running inside a debugger can be a bit fragile due to plugin loading. Krita's plugins are built in several different paths inside the source directory, and the installation process copies them into a single folder. However the debugger might accidentally not catch onto the plugin installation directory. (For example, if it thinks the plugin path is ./build/krita/plugins/ then it will miss the plugins contained in ./build/plugins/. It may be possible in the future to fix this by altering Krita's codebase, but such large changes are not yet possible until the break with Calligra repo is more complete.)

You can force Krita to look in a specific folder for plugins using the environment variable KRITA_PLUGIN_PATH. For example, using Kubuntu and installing Krita in ~/, I can use a debugger if I set the environment variable:

export KRITA_PLUGIN_PATH="~/kf5/inst/lib/x86_64-linux-gnu"

QT_MESSAGE_FORMAT and QT_LOGGING_RULES See main.cc and http://woboq.com/blog/nice-debug-output-with-qt.html

Troubleshooting

  1. When building master and SIP you might want to add -DPYQT_SIP_DIR_OVERRIDE=/usr/share/sip/PyQt5/ to make it find the files correctly. This is a bug in the current cmake files that will be fixed later.
  2. WARNING cmake versions 3.1.3 - 3.2.3 have some problems with automoc so the unittests in krita will not be built. If you happen to have this version of cmake (e.g. Ubuntu 15.10) please build hewer cmake manually and call the binary directly from the build directory