KTp/Getting Set Up: Difference between revisions

From KDE Community Wiki
< KTp
(→‎Prerequisites: note the telepathy-logger requirement)
(→‎TelepathyQt: Make the text clearer, and the warning more obvious)
Line 45: Line 45:
This installs the stuff into your system. You need your sudo password.
This installs the stuff into your system. You need your sudo password.


==TelepathyQt==
==Telepathy-Qt==


The prerequisite for all the Telepathy stuff to build is the TelepathyQt library. The source code for this is available [http://cgit.freedesktop.org/telepathy/telepathy-qt/ here]. Your distribution may package it, in which case you need version >= 0.9. Be careful not to confuse it with the telepathy-qt library which used to be in kdesupport SVN. This is *completely* different and in no way compatible.
Building any of the KDE telepathy software requires the [http://telepathy.freedesktop.org/doc/telepathy-qt/ Telepathy-Qt library]. Your distribution may package it, in which case you need version >= 0.9.


If you are compiling Tp-Qt and get a warning about needing a newer glib, simply ignore it. Glib is only needed for some internal Tp-Qt tests.
{{Warning|There used to be a library called telepathy-qt in kdesupport. This is '''NOT''' the same library.  Make sure you are using the one from freedesktop.org}}


If you are building your own copy of TelepathyQt, clone the git repository linked above and use the usual cmake method to build and install it.
If you are compiling Telepathy-Qt and get a warning about needing a newer glib, simply ignore it. Glib is only needed for some internal tests.
 
If you are building your own copy of Telepathy-Qt, clone the [http://cgit.freedesktop.org/telepathy/telepathy-qt/ git repository] and use the usual cmake method to build and install it.


== KDE Telepathy internals ==
== KDE Telepathy internals ==

Revision as of 11:16, 15 October 2012

These instructions assume that you already know how to build KDE stuff from source. It just provides a list of what you need to checkout and build, and how to run it.

Prerequisites

You will also need to install several cross-desktop Telepathy components. Packages of the following from your distribution should do fine.

  • telepathy-mission-control-5
  • telepathy-gabble for Jabber, GTalk and Facebook Chat support
  • other Telepathy connection managers if you want to try out other protocols
    • telepathy-haze for icq, msn, yahoo, aim and all the others that Pidgin/libpurple supports
    • telepathy-rakia for sip
  • telepathy-logger (for the contact list)

Recently we started using some features of kdelibs 4.7.0, so you need at least KDE SC 4.7 to compile and run KDE-Telepathy.

We're using some dbus service files and it has been proven that these needs to be in /usr/share/dbus-1/, otherwise you won't be able to connect, start a chat or do other stuff. So if you're using your own install prefix, please make sure you have copied/linked these files to /usr/share/dbus-1/* first before posting a bugreport. Thanks.

You will also need to follow the steps 'Let Git rewrite URL prefixes' listed here, if you have not done so already.: http://community.kde.org/Sysadmin/GitKdeOrgManual#Let_Git_rewrite_URL_prefixes

The "usual cmake build method"

To build all our stuff, you just need four commands (assuming you cd'd to the directory of the project):

mkdir -p build && cd build

This creates a build directory and moves you into it.


cmake -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix` -DCMAKE_BUILD_TYPE=debugfull ..

This starts the configuration phase of building, where all the needed libs are found etc. You can only continue to the next step if this one finishes successfully.


make -j3

This triggers the build itself. You can replace the number after "-j" by how many cores your CPU has + 1, so if I have two cores, I'd use "-j3", if I have 12, I'd use "-j13". Again you can move to the next step only if this one finishes successfully.


sudo make install

This installs the stuff into your system. You need your sudo password.

Telepathy-Qt

Building any of the KDE telepathy software requires the Telepathy-Qt library. Your distribution may package it, in which case you need version >= 0.9.

Warning

There used to be a library called telepathy-qt in kdesupport. This is NOT the same library. Make sure you are using the one from freedesktop.org


If you are compiling Telepathy-Qt and get a warning about needing a newer glib, simply ignore it. Glib is only needed for some internal tests.

If you are building your own copy of Telepathy-Qt, clone the git repository and use the usual cmake method to build and install it.

KDE Telepathy internals

Before the other components, you need to build a library carrying internal components. You can check it out with

git clone kde:ktp-common-internals

Scripted setup

You can find a script to clone and build the initial environment over here

Using kdesrc-build

To use kdesrc-build to build kde telepathy just add the following to your .kdesrc-buildrc file:

module-set ktp
    use-modules ktp-common-internals ktp-accounts-kcm ktp-contact-list ktp-text-ui ktp-approver ktp-kded-module ktp-auth-handler ktp-presence-applet ktp-filetransfer-handler ktp-send-file
    repository kde-projects
end module-set

Then do kdesrc-build ktp to build all of it, or kdesrc-build ktp-send-file to build just ktp-send-file for example.

KTp Components

Telepathy Accounts KCM

The next thing to get set up is the Telepathy Accounts KCM. This is the UI for account management.

ktp-accounts-kcm project page

git clone kde:ktp-accounts-kcm

This can be compiled and installed by the usual KDE build procedure.

Telepathy Logger Qt Bindings

Needed to compile the contact list app.

telepathy-logger-qt project page

git clone kde:telepathy-logger-qt

Contact List App

This application provides a traditional contact-list, similar to the one provided by Kopete.

ktp-contact-list project page

git clone kde:ktp-contact-list

Chat window App

This application provides a text chat window.

ktp-text-ui project page

git clone kde:ktp-text-ui

The approver

This notifies you when an incoming message arrives and hangs in the system tray until you're ready to start a chat.

ktp-approver project page

git clone kde:ktp-approver

Workspace Integration Module

Sits in KDED and sets your presence automatically to 'Away' after certain amount of time, can set your presence to your current song from an mpris-enabled media player (Amarok and Clementine work great) and also contains an error handler which is very important if you want to be notified of errors

ktp-kded-module project page

git clone kde:ktp-kded-module

Auth handler

Handles kwallet integration, and prompts/sends passwords to connection managers when requested.

ktp-auth-handler project page

git clone kde:ktp-auth-handler

Presence Plasmoid and Dataengine

This shows the online-ness of your accounts and allows to bring accounts online/offline

ktp-presence-applet project page

git clone kde:ktp-presence-applet

The File Transfer Handler

Does the actual transferring of files between two contacts. Displays progress via KJob

ktp-filetransfer-handler project page

git clone kde:ktp-filetransfer-handler

Dolphin Integration

Allows you to start a file transfer via a handy shortcut in your file manager.

ktp-send-file project page

git clone kde:ktp-send-file

QtGstreamer

Not part of KDE Telepathy but needed to compile the call window app

QtGstreamer home page

git clone git://anongit.freedesktop.org/gstreamer/qt-gstreamer

Call window App

This application provides a voice/video chat window (optional).

ktp-call-ui project page.

git clone kde:ktp-call-ui

Experimental Components not part of KTp (just yet)

Shared desktop ontologies

git clone git://oscaf.git.sourceforge.net/gitroot/oscaf/shared-desktop-ontologies

Nepomuk Service

NOTE: git master probably won't compile.

The Nepomuk service obsoletes the daemon and integrates Telepathy with Nepomuk, which is required by the Contact List application. Code is in git here

git clone kde:telepathy-nepomuk-service