< KDE PIM | KItineraryRevision as of 17:33, 12 June 2019 by Vkrause (talk | contribs) (→Bit Layout)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff) General Observations always 67 bytes exactly for one passenger/leg does not seem to contain signatures, checksums or compression, based on minimal bit pattern changes on adjacent tickets a lot less null bytes when PNR/seat reservation are present (ie. highspeed train tickets?) there is a unique, globally sequential ticket number, 2017 in the 600M range, 2019 in the 1B range, which suggests 32bit might be a bit short for this Bit Layout Byte:Bit (MSB) Content Meaning Notes 0:0 - 4:7 0x20 0x14 0xC2 0x08 0x10 header? fixed value in all samples 5:0 - 7:7 date? varies between samples 8:0 - 13:4 null 13:5 - 14:3 100 xxxx 0000 for Italian stations codes (UIC 83.....), 0111 for international destination? 14:4 - 17:3 24 bit uint UIC station code of departure only for Italian destinations apparently 17:4 - 18:2 100 xxxx see above 18:3 - 21:2 24 bit uint UIC station code of arrival see above 21:3 - 22:1 unknown 22:1 seems 0 in all samples, the rest varies 22:2 - 24:1 16 bit uint train number could be as little as 14 bits too, no train number > 16k has been observed 24:3 - 29:7 null 30:0 - 31:1 null if no PNR present, content unknown 31:2 - 32:0 7 bit uint seat number seat row for trains with an airplane-like numbering scheme 32:1 - 32:2 null 32:3 - 32:6 4 bit uint seat column as hex number 0 for trains without an airplane-like numbering scheme 32:7 - 33:6 null? 33:7 - 38:3 6x6 bit as listed below PNR all null if ticket has no PNR 38:4 -43:3 null 43:4 - 44:2 1010 011 or null Issuer UIC code only set if PNR is present, "83" for Trenitalia tickets otherwise, a few preceding bits are likely part of this fields as well 44:3 -45:7 null 46:0 - 48:7 unknown null if no PNR present, unknown content otherwise 49:0 - 49:7 null 50:0 - 50:7 unknown null if no PNR present, unknown content otherwise 51:0 - 57:7 0x0B 0x65 0x23 0x18 0x40 0xE6 0xC0 fixed in all samples? 58:0 - 58:3 null might be part of the ticket number? 58:4 - 62:3 32 bit uint ticket number 63:4 - 65:7 null 66:0 - 66:7 varies between samples, same as 6:4 - 7:3? Open Questions there is one sample where the departure and arrival UIC station codes are equal, contrary to what's in the corresponding PDF for international destinations the station code does not actually seem to be a valid UIC station code, but there is only one sample to back this up so far It seems plausible that the coach number is also encoded given the seat number is, 30:0 - 31:1 would seem like the obvious range. In the sample data this does not seem the case with any obvious encoding. Is the train type derived from the train number, or is that also encoded? 21:3 -22:1 would seem to be the obvious range for that, but so far no correlation to current samples found. Is the class encoded somewhere? Date/time encoding is still a mystery. Is the PNR encoded? 46-50 seems like a plausible range for that. 36^5 possible values, ie. needs >= 26 bit. What is the "CP Code" in the PDF, and is that encoded somewhere? -> unlikely based on comparing adjacent codes Retrieved from "https://community.kde.org/index.php?title=KDE_PIM/KItinerary/Trenitalia_Barcode&oldid=84928" Content is available under Creative Commons License SA 4.0 unless otherwise noted.