< KDE PIM | KItineraryRevision as of 18:51, 8 February 2020 by Vkrause (talk | contribs)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff) General Observations always exactly 114 byte all binary, there are no recognizable ASCII strings in this there's two 14-15 byte variable lengths blocks towards the end with very high entropy, possibly some kind of signature based on currently only 4 samples, so there's limited confidence in this 0:4 - 2:1 (14 bit) is "3018", which is the UIC operator code of Thalys. This matches Appendix C of ANNEX B.6 of TAP TSI, but unfortunately only for the first 18 bit it seems. Might still mean a similar encoding is used, but in a different layout. correlation between samples suggests 20-26 contain departure and arrival stations in an so far unknown encoding Bit Layout Byte[:Bit] (MSB) Content Meaning Notes 0:0 - 4:7 0x32 F2 84 20 40 fixed in all samples 5:0 - 5:7 0x01 or 0x02 class 6:0 - 8:7 null 9:0 - 35:7 TODO 36:0 - 42:7 null 43:0 - 49:7 0x9a 0c 28 82 c8 22 b2 fixed in all samples 50:0 - 54:7 TODO 55:0 - 58:7 0xc0 0a 80 30 fixed in all samples 59:0 - 59:7 0x2C or 0x2E After this there follow two blocks with the following variable length layout: Byte[:Bit] (MSB) Content Meaning Notes 0:0 - 0:7 0x02 fixed 1:0 - 1:7 8bit uint length N bytes high entropy content Remaining bytes are filled by null until reaching 114 bytes. Retrieved from "https://community.kde.org/index.php?title=KDE_PIM/KItinerary/Thalys_Barcode&oldid=87486" Content is available under Creative Commons License SA 4.0 unless otherwise noted.