Revision as of 19:47, 14 August 2019 (view source)Brute4s99 (talk | contribs) (→Linux Desktop)← Older edit Revision as of 15:00, 18 August 2019 (view source) Sredman (talk | contribs) (→Building KDE Connect: Add section for installing KDE Connect using prefix.sh)Newer edit → Line 68: Line 68: git clone https://invent.kde.org/kde/kdeconnect-kde.git git clone https://invent.kde.org/kde/kdeconnect-kde.git </syntaxhighlight> </syntaxhighlight> −KDE Connect uses cmake as a build system, which will tell you if you are missing any dependencies. On some distros you will need to install some development packages. Sometimes you will need to get the dependencies by yourseful because the development branch of KDE Connect often uses new libraries not included in disto repositories, in which case you can build those yourself or use kdesrc-build. Helpfully, some package managers have a command which will automatically fetch the dependencies for you:+KDE Connect uses cmake as a build system, which will tell you if you are missing any dependencies. On some distros you will need to install some development packages. Sometimes you will need to get the dependencies by yourself because the development branch of KDE Connect often uses new libraries not included in disto repositories, in which case you can build those yourself or use kdesrc-build. Helpfully, some package managers have a command which will automatically fetch the dependencies for you: <b> For Ubuntu </b> <b> For Ubuntu </b> Line 88: Line 88: </syntaxhighlight> </syntaxhighlight> +Be sure to uninstall the package-provided version of kdeconnect before continuing, otherwise you will end up in a confusing situation where some plugins are being provided by the system-installed version and others are coming from your new build. + +==== Installing Using prefix.sh ==== +For development, it is recommended to install to your home directory using prefix.sh. This gives a faster development cycle and avoids clobbering your system-installed version with a potentially unstable WIP version. + +These steps are roughly the same for any KDE project: + +To configure use +<syntaxhighlight lang="bash"> +cd kdeconnect-kde +mkdir build +cd build +cmake -DCMAKE_INSTALL_PREFIX=~/kde-prefix .. +</syntaxhighlight> + +To build use +<syntaxhighlight lang="bash"> +make -j8 install +</syntaxhighlight> + +To run the daemon, do +<syntaxhighlight lang="bash"> +source build/prefix.sh +~/kde-prefix/lib64/libexec/kdeconnectd +</syntaxhighlight> + +Other executables, such as the SMS app or the settings app, are on the path provided by prefix.sh, and can be found in ~/kde-prefix/bin + +==== Installing to the System ==== +If you want to use the new version of KDE Connect daily, you can install it to the system. This is not recommended for day-to-day development since it requires sudo access. To configure use To configure use Line 107: Line 137: cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug .. cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug .. </syntaxhighlight> </syntaxhighlight> −If you don't want to override your distros KDE Connect choose another prefix than /usr. To temporarily run the newly installed KDE Connect run <code>source prefix.sh</code> from the build directory. + If you install KDE Connect in a custom location you'll need to run <code>kdeconnectd</code> manually, since DBus doesn't know about it. If you install KDE Connect in a custom location you'll need to run <code>kdeconnectd</code> manually, since DBus doesn't know about it. Revision as of 15:00, 18 August 2019 This is the community page for KDE Connect. Feel free to edit it! It should contain useful and up to date resources for both users and developers. Contents 1 What is KDE Connect? 2 Installation 3 Browser Integration 4 Running KDE Connect over OpenVPN 4.1 Set up Open VPN 4.2 Configure KDE Connect 5 Building KDE Connect 5.1 Linux Desktop 5.1.1 Installing Using prefix.sh 5.1.2 Installing to the System 5.2 Android 5.3 Windows 5.4 MacOS 5.5 Mobile-Friendly QML App 5.6 Desktop SMS Messaging App (Pre-beta) 6 Troubleshooting 6.1 I have two devices running KDE Connect on the same network, but they can't see each other 6.1.1 ufw 6.1.2 firewalld 6.1.3 Fedora firewall 6.1.4 iptables 6.2 My KDE Connect crashes or restarts when trying to pair with another device 6.3 Can I run KDE Connect without a display server? 6.4 Running kdeconnect on an emulator 6.5 GSConnect 6.6 My problem is not in this list :( 7 Development 7.1 Setting up KDE Connect Repository for Development 7.1.1 Set up second remote (Optional) 7.2 Development tips 7.2.1 Restarting the daemon 7.2.2 DBus inspection What is KDE Connect? KDE Connect is a project that enables all your devices to communicate with each other. Here's a few things KDE Connect can do: Receive your phone notifications on your desktop computer and reply to messages Control music playing on your desktop from your phone Use your phone as a remote control for your desktop Run predefined commands on your PC from connected devices. See the list of example commands for more details. Check your phones battery level from the desktop Ring your phone to help finding it Share files and links between devices Browse your phone from the desktop Control the desktop's volume from the phone To achieve this, KDE Connect: implements a secure communication protocol over the network, and allows any developer to create plugins on top of it. Has a component that you install on your desktop. Has a KDE Connect client app you run on your phone. This video from 2013 demonstrates some other cool features: https://www.youtube.com/watch?v=KkCFngNmsh0 More info at Albert Vaka's or Nico's blog. Installation You will most likely find the KDE Connect desktop component as a package in your distribution's repos. If not you can ask them to package it. Despite a common misconception you can use KDE Connect on all desktop environments. Since most of the developers are using Plasma it may occur that a feature is broken or inaccessible on other desktop environments. In this case, please report it as a bug. There are multiple ways to enhance the KDE Connect experience on non-Plasma desktops. If you are a GNOME user you might prefer GSConnect, a GNOME shell extension. For desktops with AppIndicator support (Budgie, Cinnamon, LXDE, Pantheon, Unity) indicator-kdeconnect is available. The app for Android can be found in both the Google Play Store and the free and open store F-Droid. There was some development of a KDE Connect client app for iOS in 2014 (see source code) but due to our experience and various technical and organizational factors it's unlikely that we will have official iOS support anytime soon. KDE Connect is also available on SailfishOS and we are working on bringing it to other Linux-based phones (Plasma Mobile, PostmarketOS etc.) Browser Integration Plasma Browser Integration makes KDE Connect even more powerful. It allows you to control content from e.g. Youtube or Netflix from your phone and send browser tabs to your phone. Despite the name it can also be used on non-Plasma desktops. Running KDE Connect over OpenVPN There may be a variety of reasons for using KDE Connect with a VPN. Maybe you have left home and want to run a command or maybe you’re on a public wifi network where your devices aren’t allowed to communicate and you want to use remote control to give a presentation. Set up Open VPN If you have your own server with a public-facing IP address, you can set up OpenVPN yourself. OpenVPN is not the easiest piece of software to set up, but by following a setup tutorial such as this one, you should be able to manage: https://openvpn.net/howto.html In order to allow UDP broadcast packets, which are what KDE Connect uses to automatically discover two devices, OpenVPN needs to be set up for bridging (TAP device). If you use a tun device, you can still manually connect by IP address. If you want to rent a pre-configured OpenVPN service rather than set up your own it should work, but the same considerations about the server settings need to be taken into account. Once the server is running, you can use the official OpenVPN client to connect the desktop to the server. There is no official OpenVPN client for Android, but I find that the OpenVPN for Android client works well: https://play.google.com/store/apps/details?id=de.blinkt.openvpn Once both devices are connected, test that they are able to communicate over the VPN by trying to do a network ping between them. Configure KDE Connect If your OpenVPN instance is set up for bridging, KDE Connect should work just like on a local network If you are using OpenVPN with a tun device, you will have to manually add your devices by IP. Then, once you connect to the VPN, KDE Connect should automatically detect your device and either connect or be ready for pairing! Building KDE Connect Linux Desktop If you want to build KDE Connect yourself, you'll first need to grab the code from git. git clone https://invent.kde.org/kde/kdeconnect-kde.git KDE Connect uses cmake as a build system, which will tell you if you are missing any dependencies. On some distros you will need to install some development packages. Sometimes you will need to get the dependencies by yourself because the development branch of KDE Connect often uses new libraries not included in disto repositories, in which case you can build those yourself or use kdesrc-build. Helpfully, some package managers have a command which will automatically fetch the dependencies for you: For Ubuntu you can go in to /etc/apt/source.list and enable the source repositories to install all build-dependencies. # apt update # apt-get build-dep kdeconnect For openSUSE you can use # zypper si -d kdeconnect-kde Be sure to uninstall the package-provided version of kdeconnect before continuing, otherwise you will end up in a confusing situation where some plugins are being provided by the system-installed version and others are coming from your new build. Installing Using prefix.sh For development, it is recommended to install to your home directory using prefix.sh. This gives a faster development cycle and avoids clobbering your system-installed version with a potentially unstable WIP version. These steps are roughly the same for any KDE project: To configure use cd kdeconnect-kde mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=~/kde-prefix .. To build use make -j8 install To run the daemon, do source build/prefix.sh ~/kde-prefix/lib64/libexec/kdeconnectd Other executables, such as the SMS app or the settings app, are on the path provided by prefix.sh, and can be found in ~/kde-prefix/bin Installing to the System If you want to use the new version of KDE Connect daily, you can install it to the system. This is not recommended for day-to-day development since it requires sudo access. To configure use cd kdeconnect-kde mkdir build cd build cmake -DCMAKE_INSTALL_PREFIX=/usr .. To build use make sudo make install Note that this will override the KDE Connect provided by your distro If you are intending to develop KDE Connect or experience a crash and are asked to give a backtrace, build KDE Connect with debugging symbols: cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Debug .. If you install KDE Connect in a custom location you'll need to run kdeconnectd manually, since DBus doesn't know about it. For instruction on how to integrate the build with KDevelop check out this blog post Android You can find the code at git://anongit.kde.org/kdeconnect-android.git. It's easiest to use Android Studio to build the app and install it to your phone, although it can be done on the command line using gradle. Running KDE Connect in the emulator is possible, but needs an advanced networking setup. See the guide posted for the Android_Emulator Windows KDE Connect works quite well on Windows, with many features ported. See here for build instructions MacOS KDE Connect works basically on macOS. But it is an experimental build. There is not an official release for it. You can try KDE Connect with this build guide. See here for build instructions. Otherwise, get Nightly Build from Binary Factory Mobile-Friendly QML App KDE Connect provides on alternative mobile-friendly interface, targeted at mobile Linux platforms such as Plasma Mobile. The app is usable on the desktop as well. It is built from the same sources as the desktop component. The build steps are mostly the same, just one additional step is needed to enable building the app. cd build cmake -DEXPERIMENTALAPP_ENABLED=True . This will result in an additional 'kcapp' executable being built Desktop SMS Messaging App (Pre-beta) KDE Connect is working on releasing an SMS Messaging app which will let you type and view SMS messages from your computer. It is not ready for release and doesn't work correctly all the time, but it is also good enough to be useful. If you are interested in trying it or developing it, you can build it from source. A CMake flag is required to build the Messenger: cd build cmake -DSMSAPP_ENABLED=True . This will result in an additional 'kdeconnect-sms' executable being built Troubleshooting I have two devices running KDE Connect on the same network, but they can't see each other KDE Connect uses dynamic ports in the range 1714-1764 for UDP and TCP. So if you are behind a firewall, make sure to open this port range for both TCP and UDP. Otherwise, make sure your network is not blocking UDP broadcast packets. ufw If your firewall is ufw, you can open the necessary ports with: sudo ufw allow 1714:1764/udp sudo ufw allow 1714:1764/tcp sudo ufw reload firewalld If your firewall is firewalld, you can open the necessary ports with: sudo firewall-cmd --zone=public --permanent --add-port=1714-1764/tcp sudo firewall-cmd --zone=public --permanent --add-port=1714-1764/udp sudo systemctl restart firewalld.service Fedora firewall In Fedora there is a program to configure the firewall. Open Firewall Configuration (the program's filename is firewall-config), and in Zones ➔ Services check the kde-connect service. Make sure you have chosen the Permanent Configuration in the drop-down at the top, otherwise these settings will be reset upon reboot. iptables If your firewall is iptables, you can open the necessary ports with: sudo iptables -I INPUT -i <yourinterface> -p udp --dport 1714:1764 -m state --state NEW,ESTABLISHED -j ACCEPT sudo iptables -I INPUT -i <yourinterface> -p tcp --dport 1714:1764 -m state --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o <yourinterface> -p udp --sport 1714:1764 -m state --state NEW,ESTABLISHED -j ACCEPT sudo iptables -A OUTPUT -o <yourinterface> -p tcp --sport 1714:1764 -m state --state NEW,ESTABLISHED -j ACCEPT My KDE Connect crashes or restarts when trying to pair with another device Sometimes, a corrupt config file may cause KDE Connect to crash when trying to pair with a device. In that case, deleting the config ~/.config/kdeconnect might help. Can I run KDE Connect without a display server? Yes, you can pass the command line argument `-platform offscreen` to the daemon (eg: `killall -9 kdeconnectd; /usr/lib/libexec/kdeconnectd -platform offscreen`) Running kdeconnect on an emulator How to setup running kdeconnect on an emulator is described here Android_Emulator GSConnect GSConnect is an independent project which implements the KDE Connect protocol and uses the same Android app. If you are running GSConnect, please visit that project's GitHub page first for support. If you and the GSConnect team determine the issue is the Android app or protocol, feel free to report those in the KDE Connect bug tracker. My problem is not in this list :( In case you find a bug and want to report it, you can do so in the KDE bug tracker. Development KDE Connect is a perfect project to start contributing to KDE. You'll need a basic understanding of programming concepts, the rest can be learned by doing. Experience with Android or Qt is beneficial, but not needed. We have a group to discuss development. You can access it from Telegram, IRC (#kdeconnect) or matrix.org (#freenode_#kdeconnect:matrix.org). Feel free to ask any development related questions there. We also have a mailing list. All patches are submitted on Gitlab. The Android repository is here and the C++ Desktop repository is here. Be sure to select the most relevant template. You don't need to assign any reviewers, the developers are subscribed to notifications. Should this be your first patch, it's good to know that it might take some time before your patch is reviewed (we all work on KDE Connect in our free time), and you'll probably have to make some changes a couple of times. That's not because you're new, that's what happens for all reviews (even for long-time contributors). There are a couple of tasks marked as Junior Jobs on our workboard. Those have some extra information on how to approach them that help you get started. Setting up KDE Connect Repository for Development KDE Connect is actually composed of two repositories; one for the Android implementation and one for the C++ (Desktop) implementation. You can have a local clone of both on your computer and the steps to set them up are the same. For these directions, I will use the C++ repository, but if you want the Android repository, just replace every instance of 'kdeconnect-kde' with 'kdeconnect-android' Fork the repository With your web browser, open the Web GUI to KDE Connect's GitLab: https://invent.kde.org/kde/kdeconnect-kde If you are not already, sign in with your KDE identity by clicking the "Sign In" button in the top left Click the "Fork" Button, near the top right Wait for the forking to complete Clone your fork Open your new fork in the GitLab web GUI Click the "Clone" button in the top right Select the method of cloning I recommend SSH. This will require you add an SSH public key to you KDE GitLab account. An HTTPS clone will require you to log in with your KDE Identity credentials to push changes. In the folder you want to clone, do 'git clone <cloning path from above>' You are all set up! See the optional steps for ways to make life easier. Set up second remote (Optional) Having a second remote allows you to have your local 'master' branch track the upstream kdeconnect-kde master branch, so you can easily get all the latest changes. These steps assume you are using command-line git. If you are using a GUI tool, the steps will be different, but the ideas will be the same. On the command line, change to your local repository clone Execute: # Note that we use HTTPS cloning here so that you don't need a verified account to pull changes! git remote add upstream https://invent.kde.org/kde/kdeconnect-kde.git git fetch upstream git checkout -b upstream-master --track upstream/master Now whenever there are new changes upstream, simply pull the upstream-master branch, then merge or rebase your local branches onto those changes! Development tips Restarting the daemon Whenever you do a change to KDE Connect you need to restart the daemon for the change to take effect. killall kdeconnectd build/bin/kdeconnectd DBus inspection The daemon communicates with various UI components (Plasmoid, CLI, Indicator etc.) over DBus. QDbusViewer allows inspecting the DBus interface provided by the daemon which can be incredibly useful for debugging. Retrieved from "https://community.kde.org/index.php?title=KDEConnect&oldid=85577" Content is available under Creative Commons License SA 4.0 unless otherwise noted.