Guidelines and HOWTOs/Build from source: Difference between revisions

From KDE Community Wiki
(update reference talking about include-dependencies in 2nd place)
(80 intermediate revisions by 20 users not shown)
Line 4: Line 4:
Configuring your build environment is the single most important step in building KDE.  Luckily, KDE frameworks development libraries are packaged by most major distributions.  In general, building and installing user space programs such as Calligra can be done safely without altering any system files. Whenever possible, it is recommended that you build KDE using your normal user account.  Unless you are interested in changing the behavior of your system, you should build with a normal account.  Even if you are a a KWin or Plasma developer wishing to test a full KDE session with compositing effects, there are ways to construct the desired testing bed entirely within your normal user account, e.g. running Plasma through a nested X server using xypher.
Configuring your build environment is the single most important step in building KDE.  Luckily, KDE frameworks development libraries are packaged by most major distributions.  In general, building and installing user space programs such as Calligra can be done safely without altering any system files. Whenever possible, it is recommended that you build KDE using your normal user account.  Unless you are interested in changing the behavior of your system, you should build with a normal account.  Even if you are a a KWin or Plasma developer wishing to test a full KDE session with compositing effects, there are ways to construct the desired testing bed entirely within your normal user account, e.g. running Plasma through a nested X server using xypher.


However, to permanently alter your KDE/Plasma desktop environment through new System Configuration Modules and the like, you will often need to install shared libraries and other files in system folders. In these cases, bad installation can render your system unstable or your desktop environment unusable.  '''Always take caution before executing any commands as root!'''  A <tt>sudo make install</tt> can ''not'' always be undone by a simple <tt>sudo make uninstall.</tt> Technologies like containerization may help solve these problems in the future, but current distribution systems have no way to monitor the alterations you make to system shared libraries as the system administrator. Always keep records of what you are doing and make sure you know how to access the install logs to give yourself a better chance of reverting files by hand if necessary. And of course, please keep high quality, frequent backups of your data.
However, to permanently alter your KDE/Plasma desktop environment through new System Configuration Modules and the like, you will often need to install shared libraries and other files in system folders. In these cases, bad installation can render your system unstable or your desktop environment unusable.  '''Always take caution before executing any commands as root!'''  A <code>sudo make install</code> '''can not always be undone by''' a simple <code>sudo make uninstall.</code> Technologies like containerization may help solve these problems in the future, but current distribution systems have no way to monitor the alterations you make to system shared libraries as the system administrator. Always keep records of what you are doing and make sure you know how to access the install logs to give yourself a better chance of reverting files by hand if necessary. And of course, please keep high quality, frequent backups of your data.


== Configuration scripts  ==
== Configuration scripts  ==
A set of configuration scripts and bash commands are provided as a recommended configuration when building KDE manually.  If you use these as provided then your KDE build will be a lot easier and it will be easier for you to find support online. The one disadvantage to these scripts is that they hide important details from you which you may want to learn about. However the scripted and by-hand methods are completely interchangeable so once you are comfortable building KDE using the scripts you can learn more by doing everything yourself.
A set of configuration scripts and bash commands are provided as a recommended configuration when building KDE manually.  If you use these as provided then your KDE build will be a lot easier and it will be easier for you to find support online. The one disadvantage to these scripts is that they hide important details from you which you may want to learn about. However the scripted and by-hand methods are completely interchangeable so once you are comfortable building KDE using the scripts you can learn more by doing everything yourself.


If you want to do the work by hand you can follow the [[/Details| detailed instructions]].
If you want to do the work by hand you can follow the [[/Details|detailed instructions]] else continue here on.


== Install required devel packages ==
== Install required devel packages ==
Line 15: Line 15:
This section provides information about '''required''' and '''optional''' software packages needed to build the KDE applications.
This section provides information about '''required''' and '''optional''' software packages needed to build the KDE applications.


Qt 5 (http://qt.io/) is the base of KDE software. Your distro provides suitable devel packages. Optionally, you can [[/OwnQt5| build your own Qt5]].
[https://www.qt.io/ Qt5] is the base of KDE software. Your distro provides suitable devel packages. Optionally, you can [[/OwnQt5| build your own Qt5]].


=== deb-based distributions (Debian, Kubuntu...) ===
Follow this page to [[/Install the dependencies|install the required dependencies]].
<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">$ sudo apt-get build-dep qtbase5-dev
$ sudo apt-get install libbz2-dev libxslt-dev libxml2-dev shared-mime-info oxygen-icon-theme libgif-dev libvlc-dev libvlccore-dev doxygen gperf bzr libxapian-dev fontforge libgcrypt20-dev libattr1-dev network-manager-dev libgtk-3-dev xsltproc xserver-xorg-dev xserver-xorg-input-synaptics-dev libpwquality-dev modemmanager-dev libxcb-keysyms1-dev libepoxy-dev libpolkit-agent-1-dev libnm-util-dev libnm-glib-dev libegl1-mesa-dev libxcb-xkb-dev libqt5x11extras5-dev libwww-perl libxml-parser-perl libjson-perl libboost1.55-dev libgstreamer-plugins-base1.0-dev libgstreamer1.0-dev libarchive-dev liblmdb-dev
</pre>


=== openSUSE ===  
== Git remote prefix ==
Let's setup a "kde:" prefix for git commands. Add the following text to your ~/.gitconfig:
<syntaxhighlight lang="ini">
[url "git://anongit.kde.org/"]
  insteadOf = kde:
[url "ssh://[email protected]/"]
  pushInsteadOf = kde:
</syntaxhighlight>


===== openSUSE 13.2 (outdated) =====
If you are behind a firewall, add the following text to your ~/.gitconfig :
<syntaxhighlight lang="ini">
[url "https://anongit.kde.org/"]
  insteadOf = kde:
[url "ssh://[email protected].org/"]
  pushInsteadOf = kde:
</syntaxhighlight>


All the necessary dependencies:
== kdesrc-build ==
<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">$ sudo zypper si -d libqt5-qtbase
''kdesrc-build'' is a user-space package manager. It is used to compile KDE-related projects from source, and to install them into a designated directory. (see current master [https://cgit.kde.org/kdesrc-build.git/tree/README here])
$ sudo zypper in libbz2-devel libxslt-devel libxml2-devel shared-mime-info oxygen-icon-theme giflib-devel vlc-devel doxygen gstreamer-0_10-devel gstreamer-0_10-plugins-base-devel docbook-xml-slides docbook-xsl-stylesheets xcb-util-keysyms-devel perl-JSON boost-devel libxcb-devel libXrender-devel xcb-util-wm-devel xcb-util-devel xcb-util-image-devel gettext-tools libepoxy-devel
$ sudo zypper in gtk3-devel # for kde-gtk-config
$ sudo zypper in grantlee5 # for kdevplatform
$ sudo zypper in libkdcraw-devel liblcms2-devel # for gwenview
</pre>
Optional for kdeplasma-addons: libibus >=1.4.2 (see http://software.opensuse.org/package/libibus-1_0-5)


===== openSUSE 42.1 =====
This guide assumes that
* you want to install KDevelop inside your home directory,
* you want to put sources, build and log files into separate subdirectories under <tt>~/kde</tt>, as well as install everything to <tt>~/kde/usr</tt>, and
* you use a Linux system and are familiar with bash.


Install these packages (including the recommended packages):
Make sure to adapt these steps to your needs.


<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">
=== Install kdesrc-build ===
$ sudo zypper install git-core bzr ninja \
gettext-tools libqt5-qttools libgypsy0 libqt5-creator libqt5-linguist libqt5-qtbase-common-devel libqt5-qtbase-devel libqt5-qtbase-doc libqt5-qtbase-examples libqt5-qtdeclarative-devel libqt5-qtdeclarative-examples libqt5-qtdeclarative-tools libqt5-qtdoc libqt5-qtgraphicaleffects libqt5-qtimageformats libqt5-qtimageformats-devel libqt5-qtmultimedia-devel libqt5-qtmultimedia-examples libqt5-qtquick1-devel libqt5-qtquickcontrols libqt5-qtscript-devel libqt5-qtscript-examples libqt5-qtsvg-devel libqt5-qttools-devel libqt5-qtx11extras-devel libqt5-qtxmlpatterns-devel libqt5-qtxmlpatterns-examples libQt5CLucene5 libQt5Concurrent-devel libQt5Concurrent5 libQt5Core-devel libQt5Core5 libQt5DBus-devel libQt5DBus5 libQt5Declarative5 libQt5Designer5 libQt5DesignerComponents5 libQt5Gui-devel libQt5Gui5 libQt5Help5 libQt5Multimedia5 libQt5Network-devel libQt5Network5 libQt5OpenGL-devel libQt5OpenGL5 libQt5Positioning5 libQt5PrintSupport-devel libQt5PrintSupport5 libQt5Script5 libQt5Sensors5 libQt5Sql-devel libQt5Sql5 libQt5Sql5-mysql libQt5Sql5-postgresql libQt5Sql5-sqlite libQt5Sql5-unixODBC libQt5Svg5 libQt5Test-devel libQt5Test5 libQt5WebKit5 libQt5WebKitWidgets5 libQt5Widgets-devel libQt5Widgets5 libQt5X11Extras5 libQt5Xml-devel libQt5Xml5 libQt5XmlPatterns5 libQtQuick5 libQt5WebKitWidgets-devel libqt5-qtbase-private-headers-devel \
xcb-util-keysyms-devel docbook-xsl-stylesheets doxygen polkit-devel libepoxy-devel boost-devel libXcursor-devel libSM-devel giflib-devel libaccounts-qt5-devel gtk3-devel libpng16-devel fltk-devel libopenssl-devel libattr-devel ModemManager-devel NetworkManager-devel wayland-devel lmdb-devel xcb-proto-devel xcb-util-image-devel xcb-util-cursor-devel xcb-util-devel gtk2-devel libqca-qt5-devel libpwquality-devel libical-devel PackageKit-Qt5-devel pam-devel
</pre>


* OPEN ISSUES:
Start off by installing ''kdesrc-build'' and creating a basic configuration file:
** on my system 'ninja-1.6.0' was installed and when using 'custom-build-command ninja' in the kdesrc-buildrc below, the build of modules fails), maybe see https://bugs.kde.org/show_bug.cgi?id=331654
<pre>
 
mkdir -p ~/kde/src
* Failing modules (of more than 200 modules)
cd ~/kde/src
** phonon-vlc, phonon-gstreamer, plasma-pa (PulseAudio missing), kdevplatform, plasma-desktop, kaccounts-integration, kaccounts-mobile, gwenview, kdevelop, libksane, skanlite, ...
git clone kde:kdesrc-build
cd kdesrc-build


=== Fedora===
# Install a symlink of kdesrc-build to a location in PATH
All the dependencies used for building frameworks can be installed by running:
mkdir ~/bin
<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">
ln -s "$PWD/kdesrc-build" ~/bin
$ sudo yum-builddep qt phonon-backend-vlc phonon-backend-gstreamer
export PATH=~/bin:$PATH
$ sudo yum install gcc-c++ ruby doxygen git bzr flex bison gperf socat boost-devel bzip2-devel libxslt-devel libxml2-devel shared-mime-info oxygen-icon-theme giflib-devel xcb-util-keysyms-devel perl-JSON perl-Pod-Usage "*xcb*-devel" perl-XML-Parser NetworkManager-glib-devel xapian-core-devel libxkbcommon-devel libxkbcommon-x11-devel  systemd-devel libwayland-cursor-devel libwayland-server-devel libepoxy-devel gtk3-devel sane-backends-devel libattr-devel libcanberra-devel libusb-devel libxkbfile-devel fontforge-devel libical-devel gpgme-devel cyrus-sasl-devel openldap-devel libpwquality-devel polkit-devel lmdb-devel
</pre>
</pre>


=== Arch Linux===
You will need to append the line <code>export PATH=~/bin:$PATH</code> to your <tt>~/.bashrc</tt> so <code>kdesrc-build</code> is available in PATH whenever you open a terminal. Also check that PATH variable is not set to anything by default in <tt>.bashrc</tt> file
All the dependencies used for building frameworks can be installed by running:
<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">
$ sudo pacman -Sy --needed phonon-qt5 qt5-webkit qt5-script qt5-svg qt5-tools qt5-x11extras enchant jasper openexr libutempter docbook-xsl shared-mime-info giflib libxss upower udisks2 bzr git doxygen perl-json perl-libwww perl-xml-parser akonadi xorg-server-devel libpwquality fontforge eigen libfakekey qca-qt5 xapian-core xsd
</pre>


{{Note|For instructions on building and running Plasma 5, see [[Plasma/Building]].}}
=== Configure kdesrc-build ===
 
== Git remote prefix ==
Let's setup a "kde:" prefix for git commands. Add the following text to your ~/.gitconfig:
<syntaxhighlight lang="ini">
[url "git://anongit.kde.org/"]
  insteadOf = kde:
[url "ssh://[email protected]/"]
  pushInsteadOf = kde:
</syntaxhighlight>


== Clone kdesrc-build ==
The easiest way to prepare your system is to use the wizard to create the ~/.kdesrc-buildrc you will need, the default options should be ok
First you need kdesrc-build, it can be done with the following commands:
<pre>
<pre>
mkdir -p extragear/utils
./kdesrc-build-setup
git clone kde:kdesrc-build extragear/utils/kdesrc-build
ln -s extragear/utils/kdesrc-build/kdesrc-build .
</pre>
</pre>
Note: do not quote or escape any file paths.


== Download the configuration file ==
If you get an error saying "Unable to run the dialog(1) program" or similar, then install the "dialog" package, such as by running "sudo apt-get install dialog" on Debian / Ubuntu / KDE NEON.
At this point,
# download http://www.davidfaure.fr/kde/kf5-qt5-kdesrc-buildrc into your source dir
# rename it to '''kdesrc-buildrc'''
You can use this command:
<pre>
wget "http://www.davidfaure.fr/kde/kf5-qt5-kdesrc-buildrc" -O "kdesrc-buildrc"
</pre>
== Adjust the paths ==
Take a look at those lines in the configuration file you've downloaded:
<pre>
  # note that the qtdir line is not needed and can be commented out
  #  when using distro installed Qt 5 packages
  # qtdir /d/qt/5/kde/qtbase


  source-dir /d/kde/src/5
2017-04-23: User question:
  build-dir /d/kde/build/5
* When I take a look at ~/.kdesrc-buildrc I see this line `source-dir ~/kdesrc` ("Directory for downloaded source code") and I wonder if this is correct because above we said that the source directory is '''~/kde/src'''.
  kdedir /d/kde/inst/kde_frameworks
</pre>
and adjust the paths the way you want.
* qtdir = Where Qt 5 is installed, or qtbase build dir if using uninstalled or comment out this line to use distro-installed Qt packages
* source-dir = where KDE Frameworks 5 sources should be downloaded, e.g. /home/dev/dev/kde/src
* build-dir = where KDE Frameworks 5 should be built, e.g. /home/dev/kde/build
* kdedir = your KDE Frameworks 5 installation directory, e.g. /home/dev/kde/usr


NOTE, that it is not possible to use variables like $HOME (and probably not recommended to use the tilde for home: ~).
2018-01-21: Dev response:
* This has been fixed in kdesrc-build, to use as a default the paths given in this Wiki.  This would have been fixed quicker if a bug had been filed against kdesrc-build though. ;-)
* kdesrc-build-setup will now also set the include-dependencies flag by default, so you don't need to pass it as a command line option.  If you don't want dependencies then just edit the generated .kdesrc-buildrc to set the option to false or 0 instead.


Note: Append '''-std=c++11''' to the '''cxxflags''' in the '''kdesrc-buildrc'''. Otherwise, you'll be no able to build libdbusmenu-qt.
=== Run kdesrc-build (build an application) ===
{{Note|The value of <tt>'''''kde-dir'''''/share</tt> must be included in the environment variable <tt>'''XDG_DATA_DIRS'''</tt> or otherwise the build will fail. kdesrc-build should handle this for you.}}
{{Note|The Qt dir must be included in the environment variable <tt>'''CMAKE_PREFIX_PATH'''</tt> otherwise kdesrc-build will fail to configure most modules.}}


== Run kdesrc-build ==
To let <code>kdesrc-build</code> handle the compilation and installation of KDevelop (the dependencies should be already present if you use a recent distribution, like openSUSE Tumbleweed), type
{{Note|Note that this script uses GIT and Bazaar to download the sources, so ensure you have both installed. }}
{{Note|Ensure that C++ compiler is g++. Building KDE with clang has linking errors.}}
You just have to run <code>./kdesrc-build</code> to build the KDE Frameworks.
It is the preferred way of building KDE Frameworks.


{{Note|kdesrc-build will only pick up the kdesrc-buildrc file you downloaded and edited above if it is in the same directory you run kdesrc-build from.  If you save it to ~/.kdesrc-buildrc, however, it will be used no matter where you run kdesrc-build from. }}
<syntaxhighlight lang="bash">
$ kdesrc-build kdevelop
</syntaxhighlight>


Example for openSUSE 13.1 with pre-built Qt 5 packages installed via zypper:
The path to the log files (cmake, build, install) will be shown at the end of the compilation.
# directory structure looks like this now:
# src/
#  extragear/
#    utils/
#      kde-srcbuild/
#  kdesrc-build [symlink to extragear/utils/kde-srcbuild/kdesrc-build]
#
$ cd <your kf5 src dir where kdesrc-build symlink is located>
$ export CMAKE_PREFIX_PATH=/usr/lib64/cmake/Qt5
$ ./kdesrc-build


NOTE 2016-01-18 / openSUSE 42.1, that the build seems to work without the "export CMAKE_PREFIX_PATH=/usr/lib64/cmake/Qt5"
Hints:
* By default, if the kdesrc-build configuration was created using <tt>kdesrc-build-setup</tt>, also all dependencies developed in the KDE community (like KDE Frameworks), will be fetched, compiled and installed. If you don't want that, edit your <tt>~/.kdesrc-buildrc</tt> and change the related option into <tt>include-dependencies false</tt>.
* You can also pass the <tt>--debug</tt> parameter to enable the verbose output during the build process (all command invocations and compiler output).


== Analyse and fix build errors ==
=== Set up the runtime environment ===


If kdesrc-build shows you red module names with messages like "Unable to configure plasma-mediacenter with CMake!" or "Unable to build kdepim!", you have to start troubleshooting:
Copy and use these commands to a new file called ~/kde/.setup-env (or a different name, but you need to adjust the "source" command below to match):
* The latest build log is written to <pre>src/log/latest/<module-name>/</pre>
* In case of error there will be an '''error.log''' file with useful information. You will often see that there is only a build dependency missing.


= Runtime setup =
<syntaxhighlight lang="sh">
To use your new KF5 install prefix (let's call it $KF5) :
export KF5=$HOME/kde/usr
<syntaxhighlight lang="bash">
export QTDIR=/usr 
export KF5=<path to your intended frameworks install directory>
export CMAKE_PREFIX_PATH=$KF5:$CMAKE_PREFIX_PATH 
export QTDIR=<path to your qt5 install dir, or qtbase build dir if using uninstalled>
export XDG_DATA_DIRS=$KF5/share:$XDG_DATA_DIRS:/usr/share
export XDG_DATA_DIRS=$KF5/share:$XDG_DATA_DIRS:/usr/share
export XDG_CONFIG_DIRS=$KF5/etc/xdg:$XDG_CONFIG_DIRS:/etc/xdg
export XDG_CONFIG_DIRS=$KF5/etc/xdg:$XDG_CONFIG_DIRS:/etc/xdg
export PATH=$KF5/bin:$QTDIR/bin:$PATH
export PATH=$KF5/bin:$QTDIR/bin:$PATH
export QT_PLUGIN_PATH=$KF5/lib/plugins:$KF5/lib64/plugins:$KF5/lib/x86_64-linux-gnu/plugins:$QTDIR/plugins:$QT_PLUGIN_PATH
export QT_PLUGIN_PATH=$KF5/lib/plugins:$KF5/lib64/plugins:$KF5/lib/x86_64-linux-gnu/plugins\
# (lib64 instead of lib on some systems, like openSUSE)
:$QTDIR/plugins:$QT_PLUGIN_PATH
export QML2_IMPORT_PATH=$KF5/lib/qml:$KF5/lib64/qml:$KF5/lib/x86_64-linux-gnu/qml:$QTDIR/qml
#   (lib64 instead of lib, on OpenSUSE and similar)
export QML_IMPORT_PATH=$QML2_IMPORT_PATH
export QML2_IMPORT_PATH=$KF5/lib/qml:$KF5/lib64/qml:$KF5/lib/x86_64-linux-gnu/qml:$QTDIR/qml
export KDE_SESSION_VERSION=5
export QML_IMPORT_PATH=$QML2_IMPORT_PATH
export KDE_SESSION_VERSION=5
export KDE_FULL_SESSION=true
export KDE_FULL_SESSION=true
export SASL_PATH=/usr/lib/sasl2:$KF5/lib/sasl2
# (lib64 instead of lib on some systems, like openSUSE)
PS1="(kdesrc) $PS1"
</syntaxhighlight>
</syntaxhighlight>


Note that LD_LIBRARY_PATH isn't set. You shouldn't set it, the builtin rpath works magic instead, and if you set it you'll have issues when running tools that use uninstalled libs while building frameworks (e.g. meinproc, kconfig_compiler...)
A guide for building Plasma 5 specifically on Ubuntu 14.04 LTS can be found [[/Plasma_5_on_Ubuntu_14.04_LTS|here]].


For what works on Debian Sid alongside with packaged KF5 nicely see:
=== Run a previously built application ===
[https://wiki.debian.org/KdeBuildingFromSource Using (parts of) self-built KF 5, Plasma 5 and/or KDE Applications on Debian] (note I do set LD_LIBRARY_PATH there and it still uses any libraries from system that are not available self-built, it may depend on whether you want to build all of KF5/Plasma or just parts of it and whether you want the system wide parts to use your newly compiled stuff)


To use separate user settings for KF5:
Whenever you want to run a self-compiled KDevelop, you just have to do the following commands in terminal (remember to replace the name of the .setup-env script with the name you chose, if you picked a different name):
<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
export XDG_DATA_HOME=$HOME/.local5/share
$ source ~/kde/.setup-env
export XDG_CONFIG_HOME=$HOME/.config5
$ kdevelop
export XDG_CACHE_HOME=$HOME/.cache5
</syntaxhighlight>
</syntaxhighlight>


To be able to compile other stuff on top of KF5:
=== Analyse and fix build errors ===
 
First and foremost check that you have installed the dependencies mentioned in the wiki at [https://community.kde.org/Guidelines_and_HOWTOs/Build_from_source/Install_the_dependencies here]
 
If ''kdesrc-build'' shows you red module names with messages like "Unable to configure plasma-mediacenter with CMake!" or "Unable to build kdepim!", you have to start troubleshooting.
 
<pre>
<<<  PACKAGES FAILED TO BUILD  >>>
libkomparediff2 - ~/kde/log/<build-date>/libkomparediff2/error.log  :-(
</pre>
 
Inspect that log to figure out what's going on:
 
==== Missing ecm-config.cmake ====
<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
export CMAKE_PREFIX_PATH=$KF5:$CMAKE_PREFIX_PATH
$ cat ~/kde/log/<build-date>/libkomparediff2/error.log
</syntaxhighlight>
</syntaxhighlight>
<pre>
CMake Error at CMakeLists.txt:5 (find_package):
  Could not find a package configuration file provided by "ECM" (requested
  version 0.0.9) with any of the following names:
  ECMConfig.cmake
  ecm-config.cmake
  Add the installation prefix of "ECM" to CMAKE_PREFIX_PATH or set "ECM_DIR"
  to a directory containing one of the above files.  If "ECM" provides a
  separate development package or SDK, be sure it has been installed.
</pre>
In this case, the ECM (extra cmake modules) package is missing. Since ECM is a KDE Framework, this error would have been avoided by having the "kdesrc-buildrc" config option <tt>include-dependencies</tt> set to <tt>true</tt> or explicitly passing the <tt>--include-dependencies</tt> parameter when calling ''kdesrc-build''.
However, this might also happen with dependencies that ''kdesrc-build'' is not able to handle itself. In such cases, you have to install additional packages via your system package manager. Most distribution offer ways to determine which package contains the missing files.


To get more information out of qDebug statements (i.e. make it more like kDebug) :
For Ubuntu, you would head over to http://packages.ubuntu.com and search for the distro package providing a particular file (ECMConfig.cmake in this case). The package search reveals <tt>extra-cmake-modules</tt> being a hot candidate; to fix above error we simply install the package and the restart the build:
<syntaxhighlight lang="bash">
export QT_MESSAGE_PATTERN='%{appname}(%{pid})/%{category} %{function}: %{message}'
</syntaxhighlight>
or even better, to get colors:
<syntaxhighlight lang="bash">
c=`echo -e "\033"`
export QT_MESSAGE_PATTERN="%{appname}(%{pid})/(%{category}) ${c}[31m%{if-debug}${c}[34m%{endif}\
%{function}${c}[0m: %{message}"
unset c
</syntaxhighlight>


To set a KDE5 default editor (for git and svn)
<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
export EDITOR="kwrapper5 kwrite"
$ sudo apt-get install extra-cmake-modules
$ kdesrc-build ...
</syntaxhighlight>
</syntaxhighlight>


Don't bother with KDEDIR and KDEHOME etc.  this stuff isn't used anymore.
The error should be gone now.


$ which ksnapshot
==== Missing Qt5Config.cmake====


should show you now the location of the built version, ''not'' the one in the system path /usr/bin/ if you setup the paths correctly.
<pre>
CMake Error at CMakeLists.txt:45 (find_package):
  Could not find a package configuration file provided by "Qt5" (requested
  version 5.2.0) with any of the following names:


To '''run an application''', e.g. ksnapshot, you need a separate DBus session because the dbus server needs to have the right value of XDG_DATA_DIRS, in order to find $KF5/share/dbus-1/services for starting services (e.g. kded5). (Only needed when working under KDE4?). Kded5 is not needed for every feature but everytime when kioexec (which is used by KRun) is involved.
    Qt5Config.cmake
    qt5-config.cmake
</pre>


$ eval `dbus-launch` # no console output expected, (kdeinit5 is started automatically when needed)
It can be fixed by installing the dependeny
$ ksnapshot
<pre>sudo apt-get install qtbase5-dev</pre>


= Running unit tests =
Run again the kdesrc-build command, and it should be fine
Unit tests are ran from the build dir of each framework, you should first cd into it.


You need a separate DBus session because the dbus server needs to have the right value of XDG_DATA_DIRS, in order to find $KF5/share/dbus-1/services for starting services (e.g. kded5).
==== Missing Qt5WebKitWidgetsConfig.cmake====


<pre>
<pre>
eval `dbus-launch`
CMake Error at /usr/lib/x86_64-linux-gnu/cmake/Qt5/Qt5Config.cmake:26 (find_package):
kdeinit5
  Could not find a package configuration file provided by "Qt5WebKitWidgets"
make test
  with any of the following names:
 
    Qt5WebKitWidgetsConfig.cmake
    qt5webkitwidgets-config.cmake
</pre>
</pre>


Note: Regular apps will start kdeinit5 automatically. The reason it has to be started by hand when running unittests is some strange interaction with ctest.
It can be fixed by installing the dependeny
<pre>sudo apt-get install libqt5webkit5-dev</pre>


Warning: never start a KDE 4 application in this separate DBus session, it would conflict with your running Plasma 4 desktop.
Run again the kdesrc-build command, and it should be fine
Note: KDE_FULL_SESSION=true is needed to make sure that the correct QPA will be loaded.


Many of the tests require an X server, and will pop up windows briefly. An easy way to allow these tests to run without interfering with your normal X session is to do <pre>
==== kdelibs4support and qca fail on openssl ====
xvfb-run -s '-screen 0 1024x768x24' make test
At least arch linux has openssl 1.1 by default, but it seems like kdelibs4support/qca needs to be built against 1.0 for the time being.
 
Add this to your .kdesrc-buildrc to let it pick up the right headers (make sure to have openssl 1.0 and the header location is correct):
<pre>
options kdelibs4support
    cmake-options -DOPENSSL_INCLUDE_DIR=/usr/include/openssl-1.0
end options
 
options qca
    cmake-options -DOPENSSL_INCLUDE_DIR=/usr/include/openssl-1.0
end options
</pre>
</pre>
(the -s argument tells Xvfb to set the first screen to be 1024x768 pixels, with a depth of 24; at least one test requires a depth greater than 8).  In this case, if you also ensure <tt>DBUS_SESSION_BUS_ADDRESS</tt> is not set, the tests should not find your existing D-Bus session, and instead launch a new D-Bus instance.


Note that the KWindowSystem tests require a NETWM-compatible window manager to be running. One way to do this is to create a script to run such a window manager, followed by whatever is passed to it.  For example, if you have the window manager [http://awesome.naquadah.org/ awesome] installed, you could create a script called <tt>awesome-run</tt> as follows: <syntaxhighlight lang="bash">
= Testing =
#!/bin/sh
== Running unit tests ==
awesome &
Unit tests are ran from the build dir of each framework; you should first <code>cd</code> into it.
exec "$@"
 
You need a separate DBus session because the dbus server needs to have the right value of XDG_DATA_DIRS, in order to find $KF5/share/dbus-1/services for starting services (e.g. kded5).
 
<syntaxhighlight lang="bash">
$ eval `dbus-launch`
$ kdeinit5
$ make test
</syntaxhighlight>
</syntaxhighlight>
and then run the tests as <pre>
xvfb-run -s '-screen 0 1024x768x24' /path/to/awesome-run make test
</pre>


If you want to publish your test results, instead of "make test" run <pre>
'''Note:''' Regular apps will start kdeinit5 automatically. The reason it has to be started by hand when running unit tests is some strange interaction with ctest.
make Experimental
 
</pre>
'''Warning:''' never start a KDE 4 application in this separate DBus session. It would conflict with your running Plasma 4 desktop.
The test results will appear on http://my.cdash.org/index.php?project=&lt;projectname&gt;
 
'''Note:''' <tt>KDE_FULL_SESSION=true</tt> is needed to make sure that the correct QPA will be loaded.
 
Many of the tests require an X server, and will pop up windows briefly. An easy way to allow these tests to run without interfering with your normal X session is to do
 
<syntaxhighlight lang="bash">
$ xvfb-run -s '-screen 0 1024x768x24' make test
</syntaxhighlight>


= Troubleshooting =
The -s argument tells Xvfb to set the first screen to be 1024x768 pixels, with a depth of 24; at least one test requires a depth greater than 8. In this case, if you also ensure <tt>DBUS_SESSION_BUS_ADDRESS</tt> is not set, the tests should not find your existing DBus session, and instead launch a new DBus instance.


== Compilation: how to quickly solve build problems ==
Note that the KWindowSystem tests require a NETWM-compatible window manager to be running.  One way to do this is to create a script to run such a window manager, followed by whatever is passed to it.  For example, if you have the window manager [http://awesome.naquadah.org/ awesome] installed, you could create a script called <tt>awesome-run</tt> as follows:  


Situation:
<syntaxhighlight lang="bash">
#!/bin/sh
awesome &
exec "$@"
</syntaxhighlight>


One or more modules fail to build via kdesrcbuild (displayed in red font).
and then run the tests as


'''Steps to solve''' (in the given order):
<syntaxhighlight lang="bash">
xvfb-run -s '-screen 0 1024x768x24' /path/to/awesome-run make test
1) You may not have all dependencies installed. Read the output to see what missing dependency it is complaining about, search for the corresponding package for your distro, and install it.
</syntaxhighlight>


2) Check KDE build server if the module is maybe currently broken: http://build.kde.org/view/FAILED/
If you want to publish your test results, instead of "make test" run


For the next two steps we assume your kf5 development directory structure looks like this:
<syntaxhighlight lang="bash">
kf5
make Experimental
  `- build
</syntaxhighlight>
  `- src
  `- usr


3) If you get a build failure, simple fix might be to delete the build folder for that module and try building it again.
The test results will appear on http://my.cdash.org/index.php?project=&lt;projectname&gt;


4) see [[#Analyse_and_fix_build_errors | Analyse and fix build errors]]
== Testing Plasma ==


5) Delete '''build''' and '''usr'''. Run kdesrcbuild again.
The following page details how to [[/Test plasma | test Plasma]].


6a) Ask on IRC or mailing list (see [[Getinvolved/development#Communicating_with_the_team| Communicating with the team]])
= Troubleshooting =


6b) Check if there are changes in the build instructions: see History of this wiki page.
== Compilation: how to quickly solve build problems ==


7) Start over from scratch.
'''Situation:'''


== Runtime: generic runtime problem ==
One or more modules fail to build via <code>kdesrc-build</code> (displayed in red font).


Try to delete ~/.cache5, ~/.config5, ~/.local5
'''Steps to solve''' (in the given order):


(WARN: make sure not accidently delete your own config, the directories without the 5)
The following steps assume the directory structure as proposed in the ''kdesrc-build'' guide above.
# You may not have all dependencies installed. Read the output to see what missing dependency it is complaining about, search for the corresponding package for your distro, and install it.
# Check the [https://build.kde.org/view/FAILED/ list of currently broken modules] on the KDE build server.
# If you get a build failure, simple fix might be to delete the build folder for that module and try building it again.
# See [[#Analyse_and_fix_build_errors | Analyse and fix build errors]].
# Delete <tt>~/kde/build</tt> and <tt>~/kde/usr</tt>. Run <code>kdesrc-build</code> again.
# Ask for help on IRC or some mailing list, see [[Getinvolved/development#Communicating_with_the_team| Communicating with the team]].
# Check if there are changes in the build instructions: see [https://community.kde.org/index.php?title=Guidelines_and_HOWTOs/Build_from_source&action=history History of this wiki page].
# Start over from scratch.


== Runtime: Segfault when a sound is about to play (e.g. for a message box) ==
== Runtime: Segfault when a sound is about to play (e.g. for a message box) ==
Line 282: Line 291:
Example of the problem: open kate, edit some file without saving, Ctrl+W to close, a message box is about to appear and the then segfault:
Example of the problem: open kate, edit some file without saving, Ctrl+W to close, a message box is about to appear and the then segfault:


<pre>
  kate(9037)/default KNotificationManager::notify: Calling notify on "Sound"
  kate(9037)/default KNotificationManager::notify: Calling notify on "Sound"
  Segmentation fault
  Segmentation fault
</pre>


This command can solve the problem:
This command can solve the problem:


  sudo /usr/lib64/vlc/vlc-cache-gen -f /usr/lib64/vlc/plugins
<syntaxhighlight lang="bash">
  $ sudo /usr/lib64/vlc/vlc-cache-gen -f /usr/lib64/vlc/plugins
</syntaxhighlight>


See also:
See also:
* https://community.kde.org/Plasma/5.1_Errata
* [[Plasma/5.1_Errata]]
* https://forum.kde.org/viewtopic.php?f=289&t=122996
* https://forum.kde.org/viewtopic.php?f=289&t=122996


Line 298: Line 311:
(added: 2015-Jan)
(added: 2015-Jan)


Situation:
'''Situation:'''
kded5 is started but crashes because of some dependency. Stacktraces show for example `bluedevil` as possible cause.
kded5 is started but crashes because of some dependency. Stacktraces show for example `bluedevil` as possible cause.


Goal 1: disable the component to verify it as crash cause.
'''Goal 1: Disable the component to verify it as crash cause.'''


Steps:
Steps:


1) locate bluedevil files using `locate bluedevil`, for example.  
# Locate bluedevil files using <code>locate bluedevil</code>, for example.  
 
# Among the files there is <tt>kde/usr/share/kservices5/kded/bluedevil.desktop</code>. Remove it. If it was the cause, kded should stop crashing
2) Among the files there is `dev/kf5/usr/share/kservices5/kded/bluedevil.desktop`. Remove it.
If it was the cause, kded should stop crashing


Goal 2: Remove bluedevil from kdesrcbuild until it gets fixed.
'''Goal 2: Remove bluedevil from kdesrcbuild until it gets fixed.'''


Steps:
Steps:


1) Search through the dev/kf5/src/extragear/utils/kdesrc-build/*-build-include files to find the component. In this case, it was found in kf5-workspace-build-include.
# Search through the <code>dev/kf5/src/extragear/utils/kdesrc-build/*-build-include</code> files to find the component. In this case, it was found in kf5-workspace-build-include.
 
# Comment it out:
2) Comment it out:
<pre>
  # module-set kf5-bluetooth-management
  # module-set kf5-bluetooth-management
  #    repository kde-projects
  #    repository kde-projects
  #    use-modules libbluedevil bluedevil
  #    use-modules libbluedevil bluedevil
  # end module-set
  # end module-set
Further calls of `kdesrcbild` will not include the component.
== Runtime: Couldn't start kded5 (KDE4) ==
(added: 2014-Dec)
Situation: developing and executing KF5 apps under KDE 4.
Problem by example: error message on console when starting ksnapshot in KF5 environment
<pre  style="white-space: pre-wrap; white-space: -moz-pre-wrap; white-space: -pre-wrap; white-space: -o-pre-wrap; word-wrap: normal;">
ksnapshot(26577)/default KSycocaPrivate::checkDatabase: Couldn't start kded5 from org.kde.kded5.service: QDBusError("org.freedesktop.DBus.Error.ServiceUnknown", "The name org.kde.kded5 was not provided by any .service files") , falling back to running kbuildsycoca5
</pre>
</pre>


Solution (not verified yet): as said in the article, run this command before starting the app itself:
Further calls of <code>kdesrc-build</code> will not include the component.
. setup-kf5-env      # (or as your script is called)
eval `dbus-launch`    # no output expected
ksnapshot            # no kded5 error message expected
 
== Runtime: Icon theme was changed (KDE4) ==
(added: 2014-Oct, verified: 2015-Feb)
 
Situation: developing and executing KF5 apps under KDE 4.
 
Problem: After working a bit with KF5 applications your regular KDE icon theme might be changed from oxygen to breeze.
 
Solution: see https://forum.kde.org/viewtopic.php?f=67&t=25032: Open "Icons - KDE Control Module" and change the theme back to Oxygen.


== Get more help ==
== Get more help ==


If you still have trouble with the building process or runtime setup you can contact people as described in [https://community.kde.org/Getinvolved/development#Communicating_with_the_team Communicating with the team].  
If you still have trouble with the building process or runtime setup, you can contact people as described in [[Get_Involved/development#Communicating_with_the_team|Communicating with the team]].


More specifically, here is a list of beginner people who have recently had built the project and would like to specifically help with build problems. Feel free to add them to the recipient list when writing to the mailing list:
Feel free to join us by visiting [irc://irc.freenode.net/#kde-devel #kde-devel on Freenode]. A web-based client can be found at https://kiwiirc.com/client/irc.freenode.org/kde-devel


= Alternative building methods =
= Alternative building methods =


== Kubuntu CI ==
== Kubuntu CI ==
[https://community.kde.org/Kubuntu/PPAs#Kubuntu_Continuous_Integration_.28CI.29 Kubuntu CI] (replaces Project Neon 5) provides packages of KDE Git master for KDE Frameworks and Plasma 5.  Install them on your Kubuntu system to work with KDE Git.
[[Kubuntu/PPAs#Kubuntu_Continuous_Integration_.28CI.29|Kubuntu CI]] (replaces Project Neon 5) provides packages of KDE Git master for KDE Frameworks and Plasma 5.  Install them on your Kubuntu system to work with KDE Git.
 
== openSUSE Build Service ==
[https://en.opensuse.org/SDB:KDE_repositories#Unstable_Frameworks.2C_Plasma_and_Applications The openSUSE Build Service] provides packages of KDE Git master for KDE Frameworks, Plasma, Applications and Extragear. It offers repositories for Tumbleweed and the latest stable (Leap) release.


== Docker ==
== Docker ==
* [[/Alternatives | Build with docker]]
* [[/Alternatives | Build with docker]]

Revision as of 14:38, 6 June 2018

Build KDE Frameworks and Applications

Safety Precautions

Configuring your build environment is the single most important step in building KDE. Luckily, KDE frameworks development libraries are packaged by most major distributions. In general, building and installing user space programs such as Calligra can be done safely without altering any system files. Whenever possible, it is recommended that you build KDE using your normal user account. Unless you are interested in changing the behavior of your system, you should build with a normal account. Even if you are a a KWin or Plasma developer wishing to test a full KDE session with compositing effects, there are ways to construct the desired testing bed entirely within your normal user account, e.g. running Plasma through a nested X server using xypher.

However, to permanently alter your KDE/Plasma desktop environment through new System Configuration Modules and the like, you will often need to install shared libraries and other files in system folders. In these cases, bad installation can render your system unstable or your desktop environment unusable. Always take caution before executing any commands as root! A sudo make install can not always be undone by a simple sudo make uninstall. Technologies like containerization may help solve these problems in the future, but current distribution systems have no way to monitor the alterations you make to system shared libraries as the system administrator. Always keep records of what you are doing and make sure you know how to access the install logs to give yourself a better chance of reverting files by hand if necessary. And of course, please keep high quality, frequent backups of your data.

Configuration scripts

A set of configuration scripts and bash commands are provided as a recommended configuration when building KDE manually. If you use these as provided then your KDE build will be a lot easier and it will be easier for you to find support online. The one disadvantage to these scripts is that they hide important details from you which you may want to learn about. However the scripted and by-hand methods are completely interchangeable so once you are comfortable building KDE using the scripts you can learn more by doing everything yourself.

If you want to do the work by hand you can follow the detailed instructions else continue here on.

Install required devel packages

This section provides information about required and optional software packages needed to build the KDE applications.

Qt5 is the base of KDE software. Your distro provides suitable devel packages. Optionally, you can build your own Qt5.

Follow this page to install the required dependencies.

Git remote prefix

Let's setup a "kde:" prefix for git commands. Add the following text to your ~/.gitconfig:

[url "git://anongit.kde.org/"]
   insteadOf = kde:
[url "ssh://[email protected]/"]
   pushInsteadOf = kde:

If you are behind a firewall, add the following text to your ~/.gitconfig :

[url "https://anongit.kde.org/"]
   insteadOf = kde:
[url "ssh://[email protected]/"]
   pushInsteadOf = kde:

kdesrc-build

kdesrc-build is a user-space package manager. It is used to compile KDE-related projects from source, and to install them into a designated directory. (see current master here)

This guide assumes that

  • you want to install KDevelop inside your home directory,
  • you want to put sources, build and log files into separate subdirectories under ~/kde, as well as install everything to ~/kde/usr, and
  • you use a Linux system and are familiar with bash.

Make sure to adapt these steps to your needs.

Install kdesrc-build

Start off by installing kdesrc-build and creating a basic configuration file:

mkdir -p ~/kde/src
cd ~/kde/src
git clone kde:kdesrc-build
cd kdesrc-build

# Install a symlink of kdesrc-build to a location in PATH
mkdir ~/bin
ln -s "$PWD/kdesrc-build" ~/bin
export PATH=~/bin:$PATH

You will need to append the line export PATH=~/bin:$PATH to your ~/.bashrc so kdesrc-build is available in PATH whenever you open a terminal. Also check that PATH variable is not set to anything by default in .bashrc file

Configure kdesrc-build

The easiest way to prepare your system is to use the wizard to create the ~/.kdesrc-buildrc you will need, the default options should be ok

./kdesrc-build-setup

Note: do not quote or escape any file paths.

If you get an error saying "Unable to run the dialog(1) program" or similar, then install the "dialog" package, such as by running "sudo apt-get install dialog" on Debian / Ubuntu / KDE NEON.

2017-04-23: User question:

  • When I take a look at ~/.kdesrc-buildrc I see this line `source-dir ~/kdesrc` ("Directory for downloaded source code") and I wonder if this is correct because above we said that the source directory is ~/kde/src.

2018-01-21: Dev response:

  • This has been fixed in kdesrc-build, to use as a default the paths given in this Wiki. This would have been fixed quicker if a bug had been filed against kdesrc-build though. ;-)
  • kdesrc-build-setup will now also set the include-dependencies flag by default, so you don't need to pass it as a command line option. If you don't want dependencies then just edit the generated .kdesrc-buildrc to set the option to false or 0 instead.

Run kdesrc-build (build an application)

To let kdesrc-build handle the compilation and installation of KDevelop (the dependencies should be already present if you use a recent distribution, like openSUSE Tumbleweed), type

$ kdesrc-build kdevelop

The path to the log files (cmake, build, install) will be shown at the end of the compilation.

Hints:

  • By default, if the kdesrc-build configuration was created using kdesrc-build-setup, also all dependencies developed in the KDE community (like KDE Frameworks), will be fetched, compiled and installed. If you don't want that, edit your ~/.kdesrc-buildrc and change the related option into include-dependencies false.
  • You can also pass the --debug parameter to enable the verbose output during the build process (all command invocations and compiler output).

Set up the runtime environment

Copy and use these commands to a new file called ~/kde/.setup-env (or a different name, but you need to adjust the "source" command below to match):

export KF5=$HOME/kde/usr
export QTDIR=/usr  
export CMAKE_PREFIX_PATH=$KF5:$CMAKE_PREFIX_PATH  
export XDG_DATA_DIRS=$KF5/share:$XDG_DATA_DIRS:/usr/share  
export XDG_CONFIG_DIRS=$KF5/etc/xdg:$XDG_CONFIG_DIRS:/etc/xdg  
export PATH=$KF5/bin:$QTDIR/bin:$PATH  
export QT_PLUGIN_PATH=$KF5/lib/plugins:$KF5/lib64/plugins:$KF5/lib/x86_64-linux-gnu/plugins:$QTDIR/plugins:$QT_PLUGIN_PATH  
# (lib64 instead of lib on some systems, like openSUSE)
export QML2_IMPORT_PATH=$KF5/lib/qml:$KF5/lib64/qml:$KF5/lib/x86_64-linux-gnu/qml:$QTDIR/qml  
export QML_IMPORT_PATH=$QML2_IMPORT_PATH  
export KDE_SESSION_VERSION=5  
export KDE_FULL_SESSION=true
export SASL_PATH=/usr/lib/sasl2:$KF5/lib/sasl2
# (lib64 instead of lib on some systems, like openSUSE)
PS1="(kdesrc) $PS1"

A guide for building Plasma 5 specifically on Ubuntu 14.04 LTS can be found here.

Run a previously built application

Whenever you want to run a self-compiled KDevelop, you just have to do the following commands in terminal (remember to replace the name of the .setup-env script with the name you chose, if you picked a different name):

 $ source ~/kde/.setup-env
 $ kdevelop

Analyse and fix build errors

First and foremost check that you have installed the dependencies mentioned in the wiki at here

If kdesrc-build shows you red module names with messages like "Unable to configure plasma-mediacenter with CMake!" or "Unable to build kdepim!", you have to start troubleshooting.

<<<  PACKAGES FAILED TO BUILD  >>>
libkomparediff2 - ~/kde/log/<build-date>/libkomparediff2/error.log  :-(

Inspect that log to figure out what's going on:

Missing ecm-config.cmake

 $ cat ~/kde/log/<build-date>/libkomparediff2/error.log
CMake Error at CMakeLists.txt:5 (find_package):
  Could not find a package configuration file provided by "ECM" (requested
  version 0.0.9) with any of the following names:
   ECMConfig.cmake
   ecm-config.cmake
  Add the installation prefix of "ECM" to CMAKE_PREFIX_PATH or set "ECM_DIR"
  to a directory containing one of the above files.  If "ECM" provides a
  separate development package or SDK, be sure it has been installed.

In this case, the ECM (extra cmake modules) package is missing. Since ECM is a KDE Framework, this error would have been avoided by having the "kdesrc-buildrc" config option include-dependencies set to true or explicitly passing the --include-dependencies parameter when calling kdesrc-build.

However, this might also happen with dependencies that kdesrc-build is not able to handle itself. In such cases, you have to install additional packages via your system package manager. Most distribution offer ways to determine which package contains the missing files.

For Ubuntu, you would head over to http://packages.ubuntu.com and search for the distro package providing a particular file (ECMConfig.cmake in this case). The package search reveals extra-cmake-modules being a hot candidate; to fix above error we simply install the package and the restart the build:

 $ sudo apt-get install extra-cmake-modules
 $ kdesrc-build ...

The error should be gone now.

Missing Qt5Config.cmake

CMake Error at CMakeLists.txt:45 (find_package):
  Could not find a package configuration file provided by "Qt5" (requested
  version 5.2.0) with any of the following names:

    Qt5Config.cmake
    qt5-config.cmake

It can be fixed by installing the dependeny

sudo apt-get install qtbase5-dev

Run again the kdesrc-build command, and it should be fine

Missing Qt5WebKitWidgetsConfig.cmake

CMake Error at /usr/lib/x86_64-linux-gnu/cmake/Qt5/Qt5Config.cmake:26 (find_package):
  Could not find a package configuration file provided by "Qt5WebKitWidgets"
  with any of the following names:

    Qt5WebKitWidgetsConfig.cmake
    qt5webkitwidgets-config.cmake

It can be fixed by installing the dependeny

sudo apt-get install libqt5webkit5-dev

Run again the kdesrc-build command, and it should be fine

kdelibs4support and qca fail on openssl

At least arch linux has openssl 1.1 by default, but it seems like kdelibs4support/qca needs to be built against 1.0 for the time being.

Add this to your .kdesrc-buildrc to let it pick up the right headers (make sure to have openssl 1.0 and the header location is correct):

options kdelibs4support
    cmake-options -DOPENSSL_INCLUDE_DIR=/usr/include/openssl-1.0
end options

options qca
    cmake-options -DOPENSSL_INCLUDE_DIR=/usr/include/openssl-1.0
end options

Testing

Running unit tests

Unit tests are ran from the build dir of each framework; you should first cd into it.

You need a separate DBus session because the dbus server needs to have the right value of XDG_DATA_DIRS, in order to find $KF5/share/dbus-1/services for starting services (e.g. kded5).

 $ eval `dbus-launch`
 $ kdeinit5
 $ make test

Note: Regular apps will start kdeinit5 automatically. The reason it has to be started by hand when running unit tests is some strange interaction with ctest.

Warning: never start a KDE 4 application in this separate DBus session. It would conflict with your running Plasma 4 desktop.

Note: KDE_FULL_SESSION=true is needed to make sure that the correct QPA will be loaded.

Many of the tests require an X server, and will pop up windows briefly. An easy way to allow these tests to run without interfering with your normal X session is to do

 $ xvfb-run -s '-screen 0 1024x768x24' make test

The -s argument tells Xvfb to set the first screen to be 1024x768 pixels, with a depth of 24; at least one test requires a depth greater than 8. In this case, if you also ensure DBUS_SESSION_BUS_ADDRESS is not set, the tests should not find your existing DBus session, and instead launch a new DBus instance.

Note that the KWindowSystem tests require a NETWM-compatible window manager to be running. One way to do this is to create a script to run such a window manager, followed by whatever is passed to it. For example, if you have the window manager awesome installed, you could create a script called awesome-run as follows:

#!/bin/sh
awesome &
exec "$@"

and then run the tests as

xvfb-run -s '-screen 0 1024x768x24' /path/to/awesome-run make test

If you want to publish your test results, instead of "make test" run

make Experimental

The test results will appear on http://my.cdash.org/index.php?project=<projectname>

Testing Plasma

The following page details how to test Plasma.

Troubleshooting

Compilation: how to quickly solve build problems

Situation:

One or more modules fail to build via kdesrc-build (displayed in red font).

Steps to solve (in the given order):

The following steps assume the directory structure as proposed in the kdesrc-build guide above.

  1. You may not have all dependencies installed. Read the output to see what missing dependency it is complaining about, search for the corresponding package for your distro, and install it.
  2. Check the list of currently broken modules on the KDE build server.
  3. If you get a build failure, simple fix might be to delete the build folder for that module and try building it again.
  4. See Analyse and fix build errors.
  5. Delete ~/kde/build and ~/kde/usr. Run kdesrc-build again.
  6. Ask for help on IRC or some mailing list, see Communicating with the team.
  7. Check if there are changes in the build instructions: see History of this wiki page.
  8. Start over from scratch.

Runtime: Segfault when a sound is about to play (e.g. for a message box)

(added: 2015-02-27)

Example of the problem: open kate, edit some file without saving, Ctrl+W to close, a message box is about to appear and the then segfault:

 kate(9037)/default KNotificationManager::notify: Calling notify on "Sound"
 Segmentation fault

This command can solve the problem:

 $ sudo /usr/lib64/vlc/vlc-cache-gen -f /usr/lib64/vlc/plugins

See also:

Alternative: go to kf5/build/kdesupport/phonon/phonon-vlc/ and exec `make uninstall`

Runtime: kded5 crashes because of some component

(added: 2015-Jan)

Situation: kded5 is started but crashes because of some dependency. Stacktraces show for example `bluedevil` as possible cause.

Goal 1: Disable the component to verify it as crash cause.

Steps:

  1. Locate bluedevil files using locate bluedevil, for example.
  2. Among the files there is kde/usr/share/kservices5/kded/bluedevil.desktop. Remove it. If it was the cause, kded should stop crashing

Goal 2: Remove bluedevil from kdesrcbuild until it gets fixed.

Steps:

  1. Search through the dev/kf5/src/extragear/utils/kdesrc-build/*-build-include files to find the component. In this case, it was found in kf5-workspace-build-include.
  2. Comment it out:
 # module-set kf5-bluetooth-management
 #     repository kde-projects
 #     use-modules libbluedevil bluedevil
 # end module-set

Further calls of kdesrc-build will not include the component.

Get more help

If you still have trouble with the building process or runtime setup, you can contact people as described in Communicating with the team.

Feel free to join us by visiting #kde-devel on Freenode. A web-based client can be found at https://kiwiirc.com/client/irc.freenode.org/kde-devel

Alternative building methods

Kubuntu CI

Kubuntu CI (replaces Project Neon 5) provides packages of KDE Git master for KDE Frameworks and Plasma 5. Install them on your Kubuntu system to work with KDE Git.

openSUSE Build Service

The openSUSE Build Service provides packages of KDE Git master for KDE Frameworks, Plasma, Applications and Extragear. It offers repositories for Tumbleweed and the latest stable (Leap) release.

Docker