Digikam/GSoC2012/CameraUserInterfaceRevamp

Digikam GSoC 2012 Camera User Interface Revamp

This page is meant to gather information about the GSoC 2012 Idea, Camera User Interface Revamp.

Summary

DigiKam features a graphical interface to access and download pictures from digital cameras. Code is rather old, using Qt3Support classes for the icon view, the UI code intermangled deeply with backend code, and has not seen very much care and love for some years.

This project would involve taking the old code apart, rewriting a clean code base backend and front-end, but also adding user interface elements to make the most important everyday task as easy as possible.

Benefits to Community

In the next major Qt release before Augest the Qt3 support classes will be deprecated (source), and the current implementation of the camera interface is depending on q3support classes, so it is necessarily to port this interface to the new Qt 4 model/view.

After revamping the camera interface, users will be able to use it in a similar manner to the album gui. That will introduce some new UX features described below in the mockups.

In this way, 4 bugs marked as Qt model/view will be fixed: 121310 [0], 126149 [1], 158437 [2], 216491 [3].

Description & Related Work

Introduction

Camera interface is the name of the GUI that opens when user try to import some photos from different places like cameras, hard disk folders, USB storage devices, scanners, or remote computers. So this Interface is used in a generic manner to import photos, and I find it better to change its name from Camera Interface to Import Interface which apparently fits its usage better.

Deliverables

As mentioned before this project aims to port the (Camera Interface) which currently using Qt3support classes into Qt4 Model/View, the goal of model/view port is to be able to:

1. Factorize a lots of code shared with album GUI.
2. Remove Qt3 dependency.
3. Create more powerful icon-view for import interface, with advanced filtering option, group of items (RAW+JPEG), pre-tags options, etc...
4. To be able to use preview mode in camera interface (image + video), as in albumgui.

---

Functionality Listing

Here are the expected primary functionalities in the Import Interface.

1. Download to (new, last, existing) album
2. Pause importing
3. Cancel importing
4. Hide imported photos
5. Upload photos
6. Toggle Lock
7. Mark as downloaded
8. Select/Filter type of files to be shown
9. Select (all, none, locked items, new Items)
10. Invert selection
11. Thumbnails
12. View Image
13. Delete (new, selected, all)
14. Show History
15. Full screen mode
16. Close

Design

There are two proposed ways to launch the Import Interface.

1. First is the current used one from Import > Add files, which opens a dialog to select the files which you want to add.
2. Second is to launch the Import Interface from Import menu without specifying anything and the Import Interface will be empty with a line "Click import button to begin".

Because one photo is better than thousand words, I made these mockups!

UI/UX Design For the First Proposed Way

1. Icon view by default, preview mode when user wants it.

1.1. Switched to preview mode.

2. Download options.

When user clicks on the download button, this means that he is using the default download path he already setup in the camera settings (mockup 7), also there will be 3 available download options.

3. While importing the pause option will be available.

3.1. Pause option clicked, so resume option will be available.

4. Video preview in import interface which fixes bug 216491.

5. Assigning tags while importing which fixes bug 158437.

5.1. Assigning tags from right sidebar.

6. Photo grouping which fixes bug 121310.

7. Camera settings panel

7.1. Icon view settings for import interface

8. Filters panel

9. View Options

UI/UX Design For the Second Proposed Way

1. Import interface launched with the first proposed way.

No photos are presented because there is no import path or device set, it prints “Set the source path you want to download from.”, after setting it the download option will be enabled, like in the next mockup.

2. Import interface in icon view mode.

After setting the import/source path or device, the photos in it will be viewed in icon view by default, and preview mode when user needs it, there will be some options available.

2.1. Import interface in preview mode.

3. Download photos with import interface.

Implementation

Project repository: [1]

Implementation plan

The first step is to write models in a separate feature branch to list images for this Import interface which appears from its name that it should be generic user interface which means that it must have the ability to import photos from different places and devices, so these models need to be able to list images from two main backends, first one is using the library gPhoto2 which supports around 1400 cameras also in its latest release it added support for some useful extensions like ogg and mp4 which will give us the ability to download them and preview them in the Import interface. Many cameras are not supported by gPhoto2 yet, but have support for the USB mass-storage device class (USB MSC or UMS), which is a protocol that allows USB devices to be accessible, it is well-supported under Linux. So the second backend is UMS.

There are some models for the album gui which are depending on database and specific to albums, we cannot use them, I need to write some new models. Please have a look on the new proposed structure for more details about these new models. Also I need to write test cases for the models.

Next is the views, Digikam already has classes of icon view which are prepared for code reuse, I can reuse them for the Import interface with their delegate classes. That will give us some benefits including a lot of features already implemented in the icon view like tagging/grouping photos, and the preview mode as mentioned in the mockups, also the Import interface code will be cleaned up and the UI will be separate from the model which will handle all the underlying work.

The current implementation has a main view (CameraIconView) which needs to be ported.

The revamped import interface will have tagging, labels and rating facilities, I will add the needed widgets for setting them.

The current user interface design is powerful, exposing many options. We want to preserve that. But at the same time, there are three very common actions:

a) Download all new files to the last used album

b) Download all new files to a new album

c) Download all new files to an existing album.

It should be possible to carry out task (a) with one click, task (b) and (c) with two or three clicks, without opening a dialog. Friendly to the new user, preserving access to all options for the power user. These requirements are fulfilled in the above mockups.

Affected Modules

Name of module	Description of changes
cameraiconitem.h	CameraIconItem now is only used by CameraIconView. CameraIconItem is depending on iconitem class which will be deprecated and reuse the existing icon-view classes. As a result of that IconGroupItem will also be deprecated.
cameraiconview.h	This module is currently depending on some parent classes (iconview) which is based on Q3ScrollView. IconView class will be ported to the existing view (DCategorizedView) and CameraIconView will be revamped and adding tagging/lables/rating.
setupcamera.cpp	Camera setup will have a new tab for the icon view and preview modes settings, see mockup no.7.1
devices	This folder includes all the backend code for the current implementation, it will be revamped for the new models.
cameraui	Will be moved to a new name importui and updated with the new interface.
widgets	I will add some new widgets for the import interface, find them in the proposed structure.

Proposed structure for importgui

Name of new model	Description
ImportImageFilterModel	This model is based on QSortFilterProxyModel to be used for sorting items, and filtering them out.
ImportImageModel

Name of new view	Description
ImportCategorizedView	CameraIconView will be revamped to based on the DCategorizedView class.
ImportPreviewView	Preview mode for the import interface, it will have a similar implementation to the ImagePreviewView of the album gui.

Name of added widget to importgui	Description
Captions, rating and tags	There is imagedescedittab.h which can be used in the import interface as in the mockup no 5.1.
Pick label widget	As in the mockup no.8 we need a picklabel widget.
Rating widget	Also we need the rating widget
Color label widget	Also color label.

Relevant Bugs

URL	Name of Bug
121310	Allow to have a group of pictures.
126149	Camera stores both jpeg and raw (nef), handle both as one.
158437	Add ability to create/assign tags to pictures while importing.
216491	Camera interface view does not work to preview movies.

Tentative Timeline

Date	Work Description
24 April – 16 May	Familiarize with the current model/view code. Discuss with the mentor all the details needed before begining writing code. Establish regular communication with mentor and setup meeting schedules. Setup project blog to monitor progress. Speeding up to code.
17 May – 30 May	Start coding the models.
31 May – 6 June	Finishing the models.
7 June – 20 June	Make test cases for the various import models.
28 June – 11 July	Start porting the CameraIconView module.
12 July – 25 July	Coding the ImportPreviewView which is responsible for preview mode in import gui.
26 July – 1 August	Coding the necessary widgets.
2 August – 16 August	Removing useless parts, refactoring code, asking community for testing.
August 19th	Documentation, translation.

---

Do you have other obligations from late May to early August?

Yes, I will have exams which will start in 26/5 and ends in 4/6.

Minimum time involvement estimation:

April 24 – May 20: 35 - 40 hours per week

May 21 – June 4: 15 - 20 hours per week (my exams period)

June 4 – June 25: 35 - 40 hours per week

June 26 – August 15: 45 - 50 hours per week

Information about me

My name is Islam Wazery, an Egyptian Muslim Computer Science student in 4th grade. While studying computer science, I gained experience for working on topics like Operating systems internals and development, with applications for Linux programming in C, Programming Abstractions in C, Python, C++, C# and Object Oriented Applications design either in C++ or any other object oriented language, Mathematical concepts of programming languages with the knowledge of Algorithms and Data-structures. I am also an Ubuntu member, I try my best to be involved in Open Source projects to gain more experience. I have a good knowledge in Qt and a bit in GTK+. About source controlling I am using Git and SVN regularly.

I am using DigiKam to organize my pictures. So I'm very familiar with this awesome software.

I have made several patches to Digikam, and I am really interested in participating in its development and to be a part of its great team. I hope I can spend this summer hacking for Digikam, and continue hacking for it after this summer. I have to say that I really feel a great pleasure and a lot of fun when working in the beloved Open Source world, especially in Digikam.

I have a KDE identity with the developer access.

I am planning to spend in average 35 hours every week to work on the project. For the mentor to track my work, I will submit a progress record once a week. Also, we can have meetings on IRC. As long as I can coordinate with the mentor, it really doesn't matter where he/she lives.

Contact information:

IRC nick: Wazery

Email address: Wazery [at] ubuntu [dot] com

Country, City: Egypt, Cairo

IM Service and Username: al.wazery [at] gmail [dot] com

Telephone number: +202 0109-255-9132

Ubuntu Wiki Page: wiki.ubuntu.com/Wazery

TODO

I will use this wiki page to document my progress, so here is a TODO list for the implementation.

Milestone name	Milestone description	Assigned to	Status
		Islam Wazery	In Progress

Completed

Milestone name	Milestone description	Assigned to	Status

Note

Please use the talk page to discuss this proposal.