KTp/Getting Set Up: Difference between revisions

From KDE Community Wiki
< KTp
No edit summary
 
(56 intermediate revisions by 15 users not shown)
Line 1: Line 1:
These instructions assume that you already know how to build KDE stuff from source. It just provides a list of what you need to checkout and build, and how to run it.
These instructions assume that you already know how to build KDE stuff from source. Check the "[http://techbase.kde.org/Getting_Started/Build/KDE_Applications building KDE applications page]" for more help with that.  The rest of this page will just tell you what to build and where to get it from.


==Prerequisites==
==Prerequisites==


You will also need to install several cross-desktop Telepathy components. Packages of the following from your distribution should do fine.
You will need KDE 4.10 or 4.9. We do not require latest git KDE.
 
You will need to install several cross-desktop Telepathy components. Packages of the following from your distribution should do fine.
* telepathy-mission-control-5
* telepathy-mission-control-5
* telepathy-gabble (for Jabber support)
* telepathy-gabble for Jabber, GTalk and Facebook Chat support
* other Telepathy connection managers if you want to try out other protocols
* other Telepathy connection managers if you want to try out other protocols
** telepathy-haze for icq, msn, yahoo, aim and all the others that Pidgin/libpurple supports
** telepathy-rakia for sip
* telepathy-logger (for the contact list)
* kdepimlibs (devel packages; for kpeople)


Recently we started using some features of kdelibs 4.7.0, so you need at least '''KDE SC 4.7''' to compile and run KDE-Telepathy.
We're using some dbus service files and it has been proven that these needs to be in /usr/share/dbus-1/, otherwise you won't be able to connect, start a chat or do other stuff. So if you're using your own install prefix, '''please make sure you have copied/linked these files to /usr/share/dbus-1/* first''' before posting a bugreport. Thanks.
You will also need to follow the steps 'Let Git rewrite URL prefixes' listed here, if you have not done so already.:
http://community.kde.org/Sysadmin/GitKdeOrgManual#Let_Git_rewrite_URL_prefixes
==TelepathyQt4==
The prerequisite for all the Telepathy stuff to build is the TelepathyQt4 library. The source code for this is available [http://cgit.freedesktop.org/telepathy/telepathy-qt4/ here]. Your distribution may package it, in which case you need version >= 0.7.3. Be careful not to confuse it with the telepathy-qt library which used to be in kdesupport SVN. This is *completely* different and in no way compatible.
If you are compiling Tp-Qt4 and get a warning about needing a newer glib, simply ignore it. Glib is only needed for some internal Tp-Qt4 tests.


If you are building your own copy of TelepathyQt4, clone the git repository linked above and use the usual cmake method to build and install it.
You will also need to follow the steps to [[Sysadmin/GitKdeOrgManual#Let_Git_rewrite_URL_prefixes|setup the kde: prefix in Git]], if you have not done so already.


== KTelepathy internals ==
=== QtGstreamer ===
Before the other components, you need to build a library carrying internal components. You can check it out with


In order to build the [[#Call window App|call window application]], you will need the [http://gstreamer.freedesktop.org/modules/qt-gstreamer.html Qt bindings for GStreamer].  Your distribution will probably provide packages, or you can build from git:
<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
git clone kde:telepathy-common-internals
git clone git://anongit.freedesktop.org/gstreamer/qt-gstreamer
</syntaxhighlight>
</syntaxhighlight>


== Scripted setup ==
=== Ubuntu build deps ===
You can find a script to clone and build the initial environment over [http://community.kde.org/Real-Time_Communication_and_Collaboration/Getting_Set_Up/Scripted here]
 
==The parts ready for testing==
 
Please fetch these, and file bugs on any required missing features or problems. Keep things realistic on the feature requests.
 
===Telepathy Accounts KCM===
 
The next thing to get set up is the Telepathy Accounts KCM. This is the UI for account management.


Source code is [https://projects.kde.org/projects/playground/network/telepathy/telepathy-accounts-kcm/ here].
While using some Ubuntu distributions you would like to have these packages installed (they are critical to build Ktp on your machine) from apt:


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
git clone kde:telepathy-accounts-kcm
sudo apt-get install doxygen graphviz libfarstream-0.1-dev libgstreamer-plugins-base0.10-dev libgstreamer0.10-dev libqt4-dev libtelepathy-farstream-0.4-dev libtelepathy-glib-dev pkg-config cmake debhelper kdelibs5-dev libtelepathy-logger-dev libtelepathy-logger-qt4-dev libtelepathy-qt4-dev pkg-kde-tools bison cmake flex libqt4-dev libqtgstreamer-dev libtelepathy-glib-dev libtelepathy-logger-dev libxml2-dev python python-dev libxml-parser-perl librpc-xml-perl libqjson-dev libqca2-dev libqca2-plugin-ossl kdepim-dev libqtwebkit-dev
</syntaxhighlight>
</syntaxhighlight>


This can be compiled and installed by the usual KDE build procedure.
=== Arch build deps ===
 
===Contact List App===
 
This application provides a traditional contact-list, similar to the one provided by Kopete. Code is in git [https://projects.kde.org/projects/playground/network/telepathy/telepathy-contact-list here]


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
git clone kde:telepathy-contact-list
sudo pacman -S perl-libwww perl-json perl-xml-parser boost
</syntaxhighlight>
</syntaxhighlight>


===Chat window App===
==Recommended installation==
 
This method is based on a scratch of David Edmundson which is located [http://quickgit.kde.org/?p=scratch%2Fdavidedmundson%2Fktp-bootstrap.git here]. You may pull it on your local machine and run '''install.sh'''. Before going forward, make sure that you have configured your Git configuration file for KDE prefix, if not follow [https://community.kde.org/Sysadmin/GitKdeOrgManual#Let_Git_rewrite_URL_prefixes this]:
This application provides a text chat window.
 
[https://projects.kde.org/projects/playground/network/telepathy/telepathy-text-ui KDE Project Page]


<syntaxhighlight lang="bash">
<syntaxhighlight lang="bash">
git clone kde:telepathy-text-ui
git clone git://anongit.kde.org/scratch/davidedmundson/ktp-bootstrap.git
cd ktp-bootstrap
sh install.sh
</syntaxhighlight>
</syntaxhighlight>


===The approver===


This notifies you when an incoming message arrives and hangs in the system tray until you're ready to start a chat.
As soon as your installation has finished you can start Ktp by choosing '''Instant Messaging Contact List''' from the menu of your system. Alternatively, you may want to discover source yourself, e.g. if you are planning to contribute. Then, you can go path '''~/ktp/src/ktp-contact-list''' (git repository is already set there!)


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-approver/ KDE Project Page]
===Making Changes===


===Workspace Integration Module===
When you first open kdevelop for the first time select the CMakeLists file in ~/ktp/src/<project>/CMakeLists.txt when asked to specify the build directory select ~/ktp/build/<project>/ NOT the default option.


Sits in KDED and sets your presence automatically to 'Away' after certain amount of time, can set your presence to your current song from an mpris-enabled media player (Amarok and Clementine work great) and also contains an '''error handler''' which is very important if you want to be notified of errors
This will mean kdevelop will use your existing install set up and environment and any installations will be kept local.


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-kded-module/ KDE Project Page]
If you are ever prompted for your root password for installations you are doing something wrong.


===Updating===


<syntaxhighlight lang="bash">
Run ./update-ktp from your ~/ktp directory.
git clone kde:telepathy-kded-module
</syntaxhighlight>
 
===Auth handler===


Handles kwallet integration, and prompts/sends passwords to connection managers when requested.
For extra functionality and arguments please read http://kdesrc-build.kde.org/documentation/


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-auth-handler/ KDE Project Page]
== Using an existing kdesrc-build ==


To use kdesrc-build to build KDE Telepathy type


<syntaxhighlight lang="bash">
kdesrc-build extragear/telepathy
git clone kde:telepathy-auth-handler
</syntaxhighlight>


===Presence Plasmoid and Dataengine===
It may be desirable to also build TelepathyQt, which can be done by adding the following module


This shows the online-ness of your accounts and allows to bring accounts online/offline
module telepathy-qt
    repository git://anongit.freedesktop.org/telepathy/telepathy-qt4
    branch master
end module


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-presence-applet/ KDE Project Page]
[https://projects.kde.org/projects/playground/network/telepathy/telepathy-presence-dataengine/ KDE Project Page]


<syntaxhighlight lang="bash">
Because we rely on dbus activation we need to make sure our files are in the XDG dbus paths /when dbus loads/.
git clone kde:telepathy-presence-applet
</syntaxhighlight>


<syntaxhighlight lang="bash">
there are two ways to do this; either copy/link these dbus files to /usr/share/dbus-1/ or make sure XDG paths are set immediately at login, such as adding them in /etc/profile.d.
git clone kde:telepathy-presence-dataengine
</syntaxhighlight>


===The File Transfer Handler===
==Troubleshooting==


Does the actual transferring of files between two contacts. Displays progress via KJob
If you have both qt4 and qt5 installed, you may need tell kdesrc-build to use qt4 by including the following in the relevant kdesrc-buildrc (global section):


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-filetransfer-handler/ KDE Project Page]
<syntaxhighlight lang="cmake">
 
cmake-options -DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt4
<syntaxhighlight lang="bash">
git clone kde:telepathy-filetransfer-handler
</syntaxhighlight>
</syntaxhighlight>


=== Dolphin Integration ===
Allows you to start a file transfer via a handy shortcut in your file manager.


[https://projects.kde.org/projects/playground/network/telepathy/telepathy-send-file/ KDE Project Page]
Similarly, if you have both Python 3 and Python 2 installed, you may need to point to the python2 path:


<syntaxhighlight lang="bash">
<syntaxhighlight lang="cmake">
git clone kde:telepathy-send-file
cmake-options  -DPYTHON_EXECUTABLE=/usr/bin/python2
</syntaxhighlight>
 
==The bits that might work for you, but might not==
 
These parts might work for you - it's worth installing but don't start filing bugs yet.
 
===QtGstreamer===
 
Not part of KDE Telepathy but needed to compile the call window app
 
<syntaxhighlight lang="bash">
git clone git://anongit.freedesktop.org/gstreamer/qt-gstreamer
</syntaxhighlight>
 
===Call window App===
 
This application provides a voice/video chat window (optional). Code is in git [https://projects.kde.org/projects/playground/network/telepathy/telepathy-call-ui here].
 
<syntaxhighlight lang="bash">
git clone kde:telepathy-call-ui
</syntaxhighlight>
 
 
 
==The other bits==
 
===Shared desktop ontologies===
 
<syntaxhighlight lang="bash">
git clone git://oscaf.git.sourceforge.net/gitroot/oscaf/shared-desktop-ontologies
</syntaxhighlight>
 
===KDE Telepathy library : libktelepathy===
 
NOTE: git master probably won't compile.
 
Source code is [https://projects.kde.org/projects/playground/network/telepathy/telepathy-kde/repository/ here].
 
<syntaxhighlight lang="bash">
git clone kde:telepathy-kde
</syntaxhighlight>
 
This can be compiled and installed by the usual KDE build procedure.
 
===Nepomuk Service===
 
NOTE: git master probably won't compile.
 
The Nepomuk service obsoletes the daemon and integrates Telepathy with Nepomuk, which is required by the Contact List application. Code is in git [https://projects.kde.org/projects/playground/network/telepathy/telepathy-nepomuk-service here]
 
<syntaxhighlight lang="bash">
git clone kde:telepathy-nepomuk-service
</syntaxhighlight>
</syntaxhighlight>

Latest revision as of 17:53, 23 June 2014

These instructions assume that you already know how to build KDE stuff from source. Check the "building KDE applications page" for more help with that. The rest of this page will just tell you what to build and where to get it from.

Prerequisites

You will need KDE 4.10 or 4.9. We do not require latest git KDE.

You will need to install several cross-desktop Telepathy components. Packages of the following from your distribution should do fine.

  • telepathy-mission-control-5
  • telepathy-gabble for Jabber, GTalk and Facebook Chat support
  • other Telepathy connection managers if you want to try out other protocols
    • telepathy-haze for icq, msn, yahoo, aim and all the others that Pidgin/libpurple supports
    • telepathy-rakia for sip
  • telepathy-logger (for the contact list)
  • kdepimlibs (devel packages; for kpeople)


You will also need to follow the steps to setup the kde: prefix in Git, if you have not done so already.

QtGstreamer

In order to build the call window application, you will need the Qt bindings for GStreamer. Your distribution will probably provide packages, or you can build from git: 

git clone git://anongit.freedesktop.org/gstreamer/qt-gstreamer

Ubuntu build deps

While using some Ubuntu distributions you would like to have these packages installed (they are critical to build Ktp on your machine) from apt: 

sudo apt-get install doxygen graphviz libfarstream-0.1-dev libgstreamer-plugins-base0.10-dev libgstreamer0.10-dev libqt4-dev libtelepathy-farstream-0.4-dev libtelepathy-glib-dev pkg-config cmake debhelper kdelibs5-dev libtelepathy-logger-dev libtelepathy-logger-qt4-dev libtelepathy-qt4-dev pkg-kde-tools bison cmake flex libqt4-dev libqtgstreamer-dev libtelepathy-glib-dev libtelepathy-logger-dev libxml2-dev python python-dev libxml-parser-perl librpc-xml-perl libqjson-dev libqca2-dev libqca2-plugin-ossl kdepim-dev libqtwebkit-dev

Arch build deps

sudo pacman -S perl-libwww perl-json perl-xml-parser boost

Recommended installation

This method is based on a scratch of David Edmundson which is located here. You may pull it on your local machine and run install.sh. Before going forward, make sure that you have configured your Git configuration file for KDE prefix, if not follow this: 

git clone git://anongit.kde.org/scratch/davidedmundson/ktp-bootstrap.git
cd ktp-bootstrap
sh install.sh


As soon as your installation has finished you can start Ktp by choosing Instant Messaging Contact List from the menu of your system. Alternatively, you may want to discover source yourself, e.g. if you are planning to contribute. Then, you can go path ~/ktp/src/ktp-contact-list (git repository is already set there!)

Making Changes

When you first open kdevelop for the first time select the CMakeLists file in ~/ktp/src/<project>/CMakeLists.txt when asked to specify the build directory select ~/ktp/build/<project>/ NOT the default option.

This will mean kdevelop will use your existing install set up and environment and any installations will be kept local.

If you are ever prompted for your root password for installations you are doing something wrong.

Updating

Run ./update-ktp from your ~/ktp directory.

For extra functionality and arguments please read http://kdesrc-build.kde.org/documentation/

Using an existing kdesrc-build

To use kdesrc-build to build KDE Telepathy type

kdesrc-build extragear/telepathy

It may be desirable to also build TelepathyQt, which can be done by adding the following module 

module telepathy-qt
    repository git://anongit.freedesktop.org/telepathy/telepathy-qt4
    branch master
end module


Because we rely on dbus activation we need to make sure our files are in the XDG dbus paths /when dbus loads/.

there are two ways to do this; either copy/link these dbus files to /usr/share/dbus-1/ or make sure XDG paths are set immediately at login, such as adding them in /etc/profile.d.

Troubleshooting

If you have both qt4 and qt5 installed, you may need tell kdesrc-build to use qt4 by including the following in the relevant kdesrc-buildrc (global section): 

cmake-options -DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt4


Similarly, if you have both Python 3 and Python 2 installed, you may need to point to the python2 path: 

cmake-options  -DPYTHON_EXECUTABLE=/usr/bin/python2
Retrieved from "https://community.kde.org/index.php?title=KTp/Getting_Set_Up&oldid=38204"